• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.103-107
• /
• 2008

This study was to execute the experiment for analyzing the quality characteristics of mortar by type of recycled sand by using the recycled sand produced by the manufacturing system by wet gravity separation in order to develop the removal device of impurities for the production of high-quality recycled sand. As a result, this study has sown that the mortar using the high-quality recycled sand through the manufacturing system by wet gravity separation in the fluidity property, strength property, and shrinkage property largely, compared with the mortar using low-quality recycled sand that not passed the device of sand flux. There was a tendency similar to the plane mortar. In conclusion, it was considered as various quality performances of the recycled sand were improved through the production stage of prototype.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.95-99
• /
• 1996

The bending and compression strength properties of two types Rhus verniciflua specimens, which made of no heat-treated wood and heat-treated wood for urushiol extraction, were measured. The heat-treated specimens were finger-jointed with either resorcinol-phenol or polyurethane resin adhesives, and the vertical type bending strength property was also measured in these specimens. The results obtained are as follows ; 1. The correlation coefficient between the compression strength and specific gravity in the specimens of no heat-treated and heat-treated wood was high. However there was no difference in compression strength property as affected by heat treatment. 2 The correlation coefficient between the bending strength and specific gravity in the specimens of no heat-treated and heat-treated wood was also high. However, there was no difference in bending strength property as affected by heat treatment. 3 The bending test showed high correlation between modulus of elasticity and modulus of rupture for the specimens made of no heat-treated and heat-treated wood. However, there was no difference in bending strength property between the specimens made of heat-treated and no heat-treated wood. 4. The efficiencies of bending strength test on the finger-jointed specimens of heat-treated wood with resorcinol-phenol and polyurethane resin adhesives were 0.85, 0.81. respectively.

• Journal of Korea Foundry Society
• /
• v.33 no.5
• /
• pp.210-214
• /
• 2013

Recently, the automotive industry has replaced cast iron to lightweight materials like aluminum for engine efficiency of automobiles and an emission control by government. In this paper we studied two auto parts manufacturing methods using an alloy of A356. That is gravity casting and H-NCM Rheo-diecasting forging. We analyzed the microstructure and mechanical properties for this method. In Microstructure analysis results, H-NCM Rheo-diecasting forging has more finer microstrucre and better forging effect. Resulting in better mechanical properties than gravity forging.

• Journal of the Korean Geophysical Society
• /
• v.3 no.4
• /
• pp.291-310
• /
• 2000

In this study, a series of data processing methods to calculate gravity anomaly from observed marine gravity data by NORI(National Oceanic Research Institute) using RV 'Hayang2000' in 1999 at southern part of the yellow sea were developed. As a results, the RMS difference of Free air anomaly among 264 crossover points is 0.436 mGal. The shipborne gravity data by NORI using RV 'Haeyang2000' will be very useful for gravitational research in and around Korean peninsula.

• Journal of KIISE:Software and Applications
• /
• v.37 no.3
• /
• pp.194-204
• /
• 2010

A space, real or virtual, comprises regions as its parts and physical objects residing in them. A coherent and sophisticated representaion scheme for their spatial relations premises the precision and plausibility in its associated agents' inferencing on the spatial relations and the development of events occurring in such a space. The existing spatial models are not suitable for a comprehensive representation of the general spatial relations in that they have limited expressive powers based on the dichotomy between the large and small scales, or support only a small set of topological relations. The representaion model we propose has the following distinctive chracteristics: firstly, our model provides a comprehensive representation scheme to accommodate large and small scale spaces in an integrated fashion; secondly, our model greatly elaborated the spatial relations among the small-scale objects based on their contact relations and the compositional relations among their respective components objects beyond the basic topological relations like disjoint and touch; thirdly, our model further diversifies the types of supported relations by adding the container property besides the soildness together with considering the gravity direction. The resulting integrated spatial knowledge representation scheme considering the gravity allows the diverse spatial relations in the real world to be simulated in a precise manner in relation to the associated spatial events and provides an expression measure for the agents in such a cyber-world to capture the spatial knowledge to be used for recognizing the situations in the spatial aspects.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.1
• /
• pp.113-118
• /
• 2006

In this work, we observed the changes in mass difference according to Al-foam's amount of Ca contents which depends on the viscosity control of fusion, quality of foamed addition, mixing, temperature tests. These are crucial influencing factors in determining foam-metal's size in the manufacturing process. In order to obtain the specimen, we changed the specific gravity from 0.2 to 0.3 for the study of the light weight, and obtained the optimal values of specific gravity, and then showed the mechanical characteristics of ultra-lightweight metal according to the changing mass. The optimal conditions for aluminum foam is when the addition of Ca content in $1.5wt\%~2.0wt\%$

• Journal of Fashion Business
• /
• v.11 no.5
• /
• pp.155-164
• /
• 2007

Viscose rayon has advantages such as vivid luster, good dyeability, low static electricity, good absorbance and good spinnability but also has flaws such as easy crease and decrease of physical properties when it gets wetting, and it requires dry cleaning. Therefore in order to synthesize the polymer to solve the problems of rayon while keeping the advantages of it, this study made the high specific gravity polyester for ultra drape property and high contraction polyester for rayon-like fiber having volume, soft and warm sense. The polyester with high specific gravity, 1.47 was made by adding 7 wt% of $BaSO_4$ as additive. High contraction polyester was made by copolymerization by using IPA 5 mole% to increase the amorphous region as comonomer and also using Newpol BPE-20(NPE) 1.5 wt% not to decrease the properties.

• Korean Journal of Child Studies
• /
• v.28 no.4
• /
• pp.245-264
• /
• 2007

This study analyzed physical knowledge displayed in the utterances of 10 Korean children 23 - 76 months of age. Utterances were blocked into four-month time periods, except the first two months and classified into 5 categories including properties of physical objects and materials, friction, buoyancy, gravity, and the motion of physical objects. All five types of physical expressions were found in the data of the earliest period the percent age of the properties and motion was higher than the percent of friction, buoyancy, and gravity. Data suggested two transitional points of change in physical knowledge : 2-year-old's descriptions were based only on perceptually salient physical features 3- to 4-year-olds described only end-state results while children older than 4 included systematic causality.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1190-1193
• /
• 2004

The purpose of this study is to evaluate the possibility of identifying joint damping property through commercially available isokinetic ergometer (BIODEX). The proposed method is to estimate the damping torque of the knee joint from the difference between the external joint torque for maintaining isokinetic movement and the gravity torque of the lower leg. The damping torque was estimated at various joint angular velocities, from which the damping property would be derived. Measurement setup was composed of the BIODEX system with an external force sensor and Labview system. Matlab was used in the analysis of the damping property. The experimental result showed that the small variation in angular velocity due to acceleration and deceleration of the crank arm resulted in greater change of inertial torque than the damping torque, so that the estimation of damping property from the isokinetic movement is difficult.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.245-250
• /
• 1998

The Elastic modulus depends on the elastic property of composition materials, the gravity of aggregate, the bond strength of binder, the usage and quantity of admixture, curing and measuring method, etc. Accordingly, the aim of this study, by manufacturing concrete of practical high strength range(600~ 1000kg/$\textrm{cm}^2$) with the specific cement and mineral admixtures, is to compare elastic modulus with the existing equations and also to estimate elastic property of use materials. As a result, it could be confirmed that the existing equations which were proposed by the ACI 363, CEB-FIP Code, and New-RC have a tendency to the overestimation in general. However, it could be confirmed that the KCI-96 and Norwegian NS 3473 equations are closed to measuring results, and that the elastic modulus property have a different tendency due to types of cements.