• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.241-251
• /
• 1988

본 연구에서는 숫돌입자, 결합자 및 기공으로 조성된 연삭숫돌의 구조를 다공질 포성체로 보고, WA계 비트리파이드(vitrified) 및 레지노이드(resinoid) 결합자의 연삭숫돌시험편에 대하여 AE 계측방법을 이용한 인장, 압축, 굽힘 및 압렬시험을 실시하여 Babel과 Sines의 2축응력장해소이론과 연삭숫돌의 파괴조건을 관련시켜 평가함과 동시에, 이 때 검출되는 AE 신호 처리 파라미터(Parameter) 로부터 연삭숫돌의 자인자가 파괴강도 및 AE특성에 미치는 영향을 구명하여 파괴의 예지및 연삭숫돌수명의 예측가능성등의 파괴강도특성을 평가고찰하였다.

• 소성∙가공
• /
• 제17권7호
• /
• pp.523-527
• /
• 2008

In this study, mechanical properties of Alloy 718 welded after forgings for jet propulsion component was investigated. Hot-forged and machined work-pieces($230mm\times70mm\times15mm$) which have different grain sizes are welded by electron beam welding technique. After welding, the components were solution heat-treated and aged. Samples were sectioned to analyze the microstructural evolution and formation of micro-crack. It was found that HAZ grain boundary liquation crack generally initiates in the coarse grains rather than the fine grains. Needle-like phases with high Nb contents were found at the outer part near the base metal. Vickers hardness and tensile tests were carried out at room temperature and at $649^{\circ}C$. The tensile properties of electron beam welding specimens exhibited around 100MPa and 10% decrease in strength and elongation, respectively.

• 한국추진공학회지
• /
• 제13권1호
• /
• pp.19-26
• /
• 2009

과산화수소 단일추진제 추력기의 응답성에 대한 실험적 연구를 수행하였다. 촉매베드의 특성을 배제하고 추력기 설계 인자에 따른 응답특성을 살펴보기 위해 $MnO_2$/$Al_2O_3$를 주 촉매로 고정하였다. 세 가지 50 N 급 추력기를 이용하여 인젝터 방식, ullage volume, 촉매 펠렛 크기, 반응기 부피에 따른 응답 속도를 측정하였다. 측정 결과 16-20 mesh 크기 촉매, shower head 인젝터를 사용한 경우 점화지연, 압력 상승 및 하강시간은 각각 14, 108, 94 ms로 상용 하이드라진 추력기 응답성에 근접한 특성을 보였다.

• 한국재료학회지
• /
• 제24권12호
• /
• pp.652-657
• /
• 2014

The purpose of this study was to investigate the microstructures and mechanical properties of zirconia toughened alumina (ZTA) ceramics prepared from two kinds of 3Y-TZP powders. ZTA composites were prepared by adding two kinds of 3Y-TZP powders, 3YEH (BET = $7m^2/g$) and 3YEM (BET = $16m^2/g$), to ${\alpha}$-alumina in the range of 5-25 wt%. It was found that the microstructure photographs of the ZTA composites showed that the average grain size of alumina decreased as the content of zirconia increased. In our present study, specimens containing 3YEM zirconia exhibited smaller grain sizes compared to those of 3YEH zirconia. The Vickers hardness of the ZTA composites that were sintered at $1600^{\circ}C$ for 2 hrs was found to smoothly decrease with increasing zirconia content because of the low Young modulus in zirconia. The Vickers hardness of the ZTA containing 3YEH zirconia was greater than that of the 3YEM zirconia. In substance, the fracture toughness ($K_{1c}$) of the ZTA composites increased as the content of zirconia increased. The fracture toughness ($K_{1c}$) of ZTA containing 3YEM zirconia was greater than that of 3YEH zirconia.

• Ocean and Polar Research
• /
• 제28권4호
• /
• pp.451-457
• /
• 2006

Hole 1124 of ODP Leg 181 was located in the Rekohu sediment drift off eastern New Zealand in the southwest Pacific Ocean. Mean gain sizes of sortable silt were measured in two drilled cores (1124A and l124B). Chronostratigraphy of core 1124 was correlated with the well-dated nearby core S931, resulting that the age of core 1124 covers the late Pleistocene spanning about MIS (Marine Isotope Stage) 5. Mean grain size of sortable silt seemed to be relatively large during the glacial period, whereas that of the interglacial period was smaller, although several tephra layers contain some coarse-grained pyroclatic particles. The variation in mean grain size of sortable silt in Rekohu sediment drift during the late Pleistocene indicates that the intensity of Deep Western Boundary Current (DWBC) might have been enhanced during the glacial period as a result of increased production of Antarctic Bottom Water (AABW).

• 한국분말재료학회지
• /
• 제11권6호
• /
• pp.472-476
• /
• 2004

The Fe-Ni compact bodies were fabricated using Fe-Ni mixed powders with 50 nm in diameter by injection molding process. The relationship between microstructure and material properties was characterized with respect to the volume ratio of powder/binder and sintering temperature with SEM and TEM. In the compact body having the volume percent ratio of 45(Fe-Ni) : 55(binder), which was sintered at $900^{\circ}C$ the values of relative density and hardness were low about 97.7% and 277.1 Hv, respectively. Using the composition of 50(Fe Ni) : 50(binder) and sintered at $900^{\circ}C$, the values of relative density and hardness were 98.5%, 294.4 Hv, respec-tively. The grain size of sintered bodies strongly depended on the sintering temperature. In both samples sintered at $600^{\circ}C$ and $900^{\circ}C$, the average grain sizes were about 150 nm and 500 nm in diameter, respectively.

• 열처리공학회지
• /
• 제8권4호
• /
• pp.245-254
• /
• 1995

The purpose of this study was to examine the effects of low melting point phase(LMPP) on mechanical properties in the Al-Cu-Li-X(In, Be) alloys. This study was performed by the differential scanning calorimetry(DSC), the transmission electron microscope(TEM), hardness test, tensile test and notch tensile test. The shape of LMPP in the specimens homogenized at $570^{\circ}C$ was film type due to remelting at grain boundary during homogenization. Low melting point phases had no effects on mechanical properties in the aging treated materials, because the density of LMPPs was low. Mechanical properties of the aging treated materials were affected by the density of matrix precipitation phases and grain sizes. For the In or In, Be added Al-Cu-Li alloys, the optimum solution treatment temperature was $550^{\circ}C$. The strength of Al-Cu-Li-In-Be $T_6$ treated alloy was higher than that of 2090-$T_8$ alloy.

• 한국분말재료학회지
• /
• 제5권4호
• /
• pp.279-285
• /
• 1998

The microstructures and mechanical properties of submicron WC-Co cemented carbides were investigated in relation to cobalt content. To inhibit the WC grain growth during sintering, VC was added as a inhibitor in each alloy with 3 mass% to the cobalt content. The WC-(5, 8, 10, 15, 20) mass% Co compacts were sintered at $1400^{\circ}C$ for 30 min in vacuum. Some of WC-(5, 8, 10) mass% Co sintered compacts were HIPed with 120 atm at 130$0^{\circ}C$ for 1 hr. The shrinkages of all HIPed alloys were increased without depending on the cobalt contents and the sintered densities of them. The relative densities of the alloys were increased with the cobalt content and HIPing. The less the cobalt content, the larger the WC grain. Many contiguities of WC grains were found in WC-5 mass% Co alloy. The sizes and numbers of pores in the alloys were decreased by HIPing. And also the strength and the hardness of each alloy were increased. The maximum hardness was about 18.95 GPa in the WC-5 mass% Co alloy HIPed and the maximum transverse-rupture strength (T.R.S.) 3.2 GPa in the WC-20 mass% Co alloy sintered.

• 대한치과기공학회지
• /
• 제29권1호
• /
• pp.49-57
• /
• 2007

This study was to add crushed frit with different grain sizes to 3Y-TZP so that it could determine the mechanical properties depending on sintering temperature. In this study, 3 types specimens were prepared in powder with respective additions of 20wt.% frit, which was sized through 24-, 48- and 72-hour ball milling with zirconia. Then, sintered pellets were tested in experiments under the temperature variations for different compositions. As a result, this study came to the following findings: 1. It was found that the higher sintering temperature and the longer ball milling time of frit led to the higher sintered density. 2. Bending strength tended to increase with higher sintering temperature and longer ball milling time of frit. 3. Hardness tended to increase with higher sintering temperature and longer ball milling time of frit. 4. However, it was found that fracture toughness didn't vary significantly depending on sintering temperature. From these findings, it was concluded that the smaller frit grain size and the narrower particle size distribution of frit lead to the better mechanical properties.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.627-632
• /
• 2005

In this study, a series of large-scale oedometer tests was performed to investigate the compressibility of rock fill materials. The testing samples were prepared to have three different grain size distributions and for each distribution, exist in two different states(dried and saturated). The test results indicated that particle breakages occurred mainly for the particles larger than 4.75mm in size and increased with increasing grain sizes. Also, it was found that, for a dry sample as it became well-graged, its compressibility decreased and accordingly, its tangent constrained modulus increased. A comparion between the samples in dry and saturated states revealed that compressibility of the materials increases with increasing water content. The values of tangent constrained modulus calculated for the tested dry samples were larger by about 10 to 20%, on average, than those for the saturated samples.