• Economic and Environmental Geology
• /
• v.42 no.2
• /
• pp.121-131
• /
• 2009

The distribution characteristics of heavy metals for surface sediments in east oceanic dumping area (EDA) and west oceanic dumping area (WDA) are evaluated by grain sizes, minerals, sedimentation rates and compositions of heavy metals. The mean grain sizes in EDA and WDA range from $7.95{\Phi}$ to $8.51{\Phi}$ and $7.42{\Phi}$ to $8.15{\Phi}$, respectively. These are mostly belonging to the M (mud) type. Minerals in the surface sediments consist of illite with chlorite, smectite, and kaolinite. Sedimentation rates estimated by $^{210}Pb$ method in EDA and WDA are 1.11 mm/yr$\sim$1.73 mm/yr and 1.87 mm/yr, respectively. According to the interrelationship, concentrations of Ni, Cu, Cr, and Zn are closely associated with mean grain size, Al, and Fe, whereas concentrations of Cd and Pb are poorly associated with ones. The enrichment factors of these elements are higher than 1.5, suggesting that the concentrations of Cd and Pb in the surface sediments are affected by anthropogenic sources. The $I_{geo}$-class numbers of Cd and Pb in the surface sediments are mostly classified in 2 to 4, showing moderate to strongly polluted. These numbers in EDA are higher than that of WDA, and the highest number is 4, indicative of the strongly polluted class. Our results show that the disposed wastes at EDA include mineralogical wastes, dredged materials from sewage disposals, and sludges from constructions having materials of WDA. The annual amount of oceanic dumping in EDA is double than that in WDA.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.2
• /
• pp.245-250
• /
• 2008

The purpose of this study was to evaluate quality of abalone porridge prepared with different sizes of rice and amounts of added water. pH of porridge was mostly stable from 6.3 to 6.8 but as more water was added, pH increased. Increase of added water resulted in higher TBARS value, but most of TBARS value was generally low, and there wasn't any significant difference. Lightness of the rice powder porridge was 53 to 59 and it was higher than that of round rice porridge. Redness tended to be high as rice size was bigger and less amount of water was added. Yellowness of round rice porridge and half rice porridge was higher than that of rice powder porridge. Also, yellowness of porridge had a tendency to decrease as amount of water was increased. Consistency, viscosity, and firmness was higher in round rice porridge and half rice porridge than in rice powder porridge, and increase in added water amount led to decrease of all textural properties. In the measurement of texture properties that is only present in rice grain, the hardness, gumminess, and chewiness of round rice grain porridge was significantly higher than that of half rice. In the sensory evaluation result, all sensory properties was significantly different (p<0.05) among the abalone porridges prepared with different rice sizes and added water. The viscosity, flavor, texture, and taste of half rice abalone porridge added 1000 mL water showed the highest sensory scores.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.11
• /
• pp.1-9
• /
• 1972

For a measure against late transplanting, this experiment was conducted to investigate a reasonable seeding rate in nursery bed and a proper nursery size. The treatments applied to this experiment are as follows a) seeding rates: 0.2ι, 0.4ι and 0.6ι per 3.3$m^2$ b) nursery sizes. for 10a-field area: 39.6$m^2$, 49.5$m^2$ and 59.4$m^2$ c) transplanting dates: June 5, June 25 and July 15. The seeding date was April 26 and planting density was determined by the number of sound seedlings based on the combination of seeding rate and nursery size. The results may be summarized as follows: 1. In seedlings both increased nursery period and decreased seeding rate showed a remarkable-increase in plant height, number of leaves, dry matter weight and the ratio of dry weight to plant height. But their number of tillers and live leaves did not show such tendency. 2. Delayed transplanting date shortened culm length and panicle length as well as number of days from transplating to heading and it also delayed heading date. On the other hand the transplanting of 80-day seedlings resulted in premature heading. 3. As a result late transplanting reduced number of spikelets per panicle, maturing rate and 1000-grain weight. In the last analysis it linearly reduced grain yield. The decreasing rate of yield by late transplanting was 15.6% in June 25 plot and 41. 3% in July 15 plot, compared with the yield in June 5 plot. Such a remarkable decrease in yield of the extremely late transplanted plot was mainly due to markedly decreasing number of spikelets per panicle and 1000-grain weight. 4. Both increased seeding rate and nursery size gave a rise in number of tillers per unit area as well as number of transplanting hills but gave a fall in culm length and panicle length. 5. Accordingly, though thick seeded - dense planted plot increased number of panicles per unit area, decrease in number of spikelets per panicle and 1000-grain weight made no differences in yield between thick seeded - dense planted plot and thin seeded - sparse planted one. However, the yield in the thick seeded - dense planted plot transplanted on July 15 was reduced owing to the remarkable decrease in maturing rate and 1000-grain weight. 6. We came to the conclusion that as a measure against the extremely late transplanting the suitable seeding rate was 0.4ι per 3.3$m^2$ and the proper nursery size was 59.4$m^2$ for 10a-field area.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.7
• /
• pp.5-12
• /
• 2012

Recently the installation of reinforced earth retaining walls in the domestic construction site has increased, surpassing conventional RC walls. These reinforced walls have various types depending on the reinforcing material, installation method and the form of face panel. However, there are difficulties in design and construction management due to the unproved safety of construction method. In case of reinforcing materials, despite the fact that they come in all different sizes and types produced by small businesses or partially imported with cheap price and low quality, no proper standards for designing the walls have been suggested. In order to apply reinforced retaining wall system to broad cases and design the walls effectively considering site conditions, specific design and construction guidelines for efficient construction management are needed. In conclusion, this study verified that reduction factors can be greatly affected by grain sizes and stiffness of backfill materials and granularity range, therefore in case of relatively large construction site, it is required to redesign the reinforced retaining wall by evaluating site installation resistance test, applying respective reduction factors to each backfill material and select the right geogrid depending on the usage of retaining wall so as to enhance the safety of reinforced earth retaining walls with efficiency.

• Journal of the Korean Ceramic Society
• /
• v.39 no.1
• /
• pp.68-73
• /
• 2002

The dielectric properties and synthesis of $LaAlO_3$ ceramics from mixtures of $La_2O_3-Al_2O_3$ (LAO) and $La_2O_3-Al(OH)_3$(LAH) via grinding process were investigated. The single phase $LaA1O_3$of LAO and LAH powders were formed at $1300^{\circ}C$ and $1000^{\circ}C$, respectively. A non-reacted $La_2O_3$ existing in calcined powder was changed to La(OH)$_3$by moisture in the air, and their samples were worse than those of the samples made from a $LaA1O_3$single phase powder. The densities of LAO samples sintered at 150$0^{\circ}C$ for 4 h and LAH samples sintered at $1400^{\circ}C$ for 4 h were 97.3% and 98.3% of theory density, respectively. Grains of LAH sample showed uniformity and their sizes were 0.75 ${\mu}{\textrm}{m}$, and LAO samples showed non-uniformity and their sizes were 4-5 ${\mu}{\textrm}{m}$. Dielectric constant of LAO and LAH samples were the same value (≒22), however dielectric loss of LAH sample (0.0003) were lower than that of LAO sample(0.001)due to grain size.

• Journal of Welding and Joining
• /
• v.33 no.5
• /
• pp.35-40
• /
• 2015

Characterization of microstructures and mechanical properties of 83mm thickness EH36-TM welds produced by the combined flux cored arc (FCA) and electro gas (EG) welding processes has been studied with the two different groove conditions, single-V (SV) and double-V (DV) bevels. The welding consumables used for FCA and EG welding processes were ASME/AWS A5.29 (E81T1-K2) and A5.26 (EG72T), respectively. Experimental results showed that all the mechanical properties of welds such as tensile property, CVN toughness and Vickers hardness met IACS requirements. The tensile strength of EG welded plates were reduced by approximately 4% (DV: 3.8%, SV: 4.2%) compared to the base metal. The hardness value of SV-beveled weld metal was slightly lower than that of DV-beveled one. There were no significant differences as per welding groove conditions except for the weld metal. In addition, at the fusion line, the toughness of SV condition was 20J lower and the weld metal was 40J lower than DV condition, respectively. On the basis of microstructural analysis, grain boundary ferrite (GBF) structures for SV condition were 2 times higher volume fraction than for DV condition and their packet sizes were coarsened to almost double. It was thus suggested that the GBF volume fractions and packet sizes in the weld metal of EH36-TM steel plates are the most important factors affecting the mechanical properties of the combined FCA and EG welded joint. Nevertheless, all the results of welds with both DV and SV conditions were found to be excellent.

• Journal of Biosystems Engineering
• /
• v.38 no.2
• /
• pp.95-102
• /
• 2013

Purpose: Using a laboratory indented cylinder separator, broken rice separation experiments were conducted and the characteristics of the separation process were studied to provide information for developing a prototype indented cylinder broken rice separator. Methods: Rice (Ilmi variety) milled in a local RPC was used for the experiment. Rice kernels were classified into four groups according to their length l; whole kernels (I > 3.75 mm), semi-whole kernels (2.5 < I < 3.75 mm), broken kernels (1.75 < I < 2.5 mm), and foreign matters (I < 1.75 mm). A laboratory grain cleaner, Labofix '90 (Schmidt AG, Germany) was used for the experiments. Experiments were designed as a $4{\times}4$ factorial arrangement in randomized blocks with three replications. Cylinder rotational speeds (17, 34, 51, 68 rpm) and trough angles (15, 37.5, 60, $82.5^{\circ}$) were the two factors and feed rates (25, 50 kg/h), indent shapes (Us, $S_1$ type), and indent sizes (2.5, 3.75 mm) were treated as the blocks. Two 125 g samples and one 125 g sample were taken at the cylinder outlet and from the trough, respectively. The whole, semi-whole, and broken kernel weight ratio of the samples and feed was determined by a rice sizing device. From these weight ratios, purities, degrees of extraction and coefficient of separation efficiency were calculated. Results: Trough angle, cylinder speed, and their interaction on the coefficient of separation efficiency were statistically significant. Cylinder speed of 17, 34, and 51 rpm made the most effective separation when the trough angle was $15^{\circ}$ or $37.5^{\circ}$, $60^{\circ}$, and $82.5^{\circ}$, respectively. Maximum values of coefficient of separation efficiency were in the range of 60 to 70% except when the indent size was 2.5 mm and were recorded for the combinations of low cylinder speed (17 rpm) with medium trough angle ($37.5^{\circ}$ or $60^{\circ}$). Indent shape did not appear to make any noticeable difference in separation efficiency. Conclusions: Due to the interaction effect, the trough angle needs to be increased appropriately when an increase in cylinder speed is made if a rapid drop of effectiveness of separation should be avoided. In commercial applications, $S_1$ type indents are preferred because of their better manufacturability and easier maintenance. For successful separation of broken kernels, the indent size should be set slightly bigger than the actual sizes of broken kernels: an indent size of 3.0 mm for separating broken kernels shorter than 2.5 mm.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.7
• /
• pp.518-524
• /
• 2013

A pilot-scale test-bed was operated employing three soils with different grain sizes dredged from the Nakdong River to obtain the design and operation parameters of the multi-purpose filtration pond, such as the filtrate productivity of the filter sand, the appropriate removal period of the surface clogging and the contaminant removal efficiency. The cross-flow velocities were applied stepwise ranging from 0 to 40 cm/sec in order to simulate the various velocities in the artificial stream of the pond. Results showed that a filtrate production rate of 5~3 $m^3/m^2-day$ was maintained by removing the surface clogging every 7 to 13 days and that the filtrate quality was not affected by the factors of the filtrate production rate, the grain size of the filter sand and the cross-flow velocity. Results also showed that most of the removal occurred within 50 cm of the top soil and that the removal efficiencies with the filtration distance of 2.4 m were 80~95% for turbidity, 20~30% for COD, 75~90% for BOD, 5~20% for total nitrogen and 20~60% for total phosphorus, which suggested that particulate matters had a high removal efficiency.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.157-157
• /
• 2015

Recently, the growing interest in organic microelectronic devices including OLEDs has led to an increasing amount of research into their many potential applications in the area of flexible electronic devices based on plastic substrates. However, these organic devices require a gas barrier coating to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency OLEDs require an extremely low water vapor transition rate (WVTR) of $1{\times}10^{-6}g/m^2day$. The Key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required ($1{\times}10^{-6}g/m^2day$) is the suppression of defect sites and gas diffusion pathways between grain boundaries. In this study NBAS process was introduced to deposit enhanced film density single gas barrier layer with a low WVTR. Fig. 1. shows a schematic illustration of the NBAS apparatus. The NBAS process was used for the $Al_2O_3$ nano-crystal structure films deposition, as shown in Fig. 1. The NBAS system is based on the conventional RF magnetron sputtering and it has the electron cyclotron resonance (ECR) plasma source and metal reflector. $Ar^+$ ion in the ECR plasma can be accelerated into the plasma sheath between the plasma and metal reflector, which are then neutralized mainly by Auger neutralization. The neutral beam energy is controlled by the metal reflector bias. The controllable neutral beam energy can continuously change crystalline structures from an amorphous phase to nanocrystal phase of various grain sizes. The $Al_2O_3$ films can be high film density by controllable Auger neutral beam energy. we developed $Al_2O_3$ high dense barrier layer using NBAS process. We can verified that NBAS process effect can lead to formation of high density nano-crystal structure barrier layer. As a result, Fig. 2. shows that the NBAS processed $Al_2O_3$ high dense barrier layer shows excellent WVTR property as a under $2{\times}10^{-5}g/m^2day$ in the single barrier layer of 100nm thickness. Therefore, the NBAS processed $Al_2O_3$ high dense barrier layer is very suitable in the high efficiency OLED application.

• The Journal of Engineering Geology
• /
• v.16 no.1 s.47
• /
• pp.15-21
• /
• 2006

Sandy soils obtained from the field were examined by the way of particle analyses. The hydraulic conductivity values of the disturbed soil samples were measured by the falling head method. Then the correlations between the hydraulic conductivity and particle distribution were defined. The soil which was a product of the weathering of the granitic rocks belonged to sand and loamy sand area in a sand-silt-clay triangular diagram. The measurements of hydraulic conductivity were $1.15X10^{-5}\sim7.31X10^{-4}cm/sec$ which is the range of sand and silt. It was clearly observed that the hydraulic conductivity measurements of the sandy soils showed stronger correlations with the particle variances rather than the mean grain sizes. The larger the variances, the smaller the hydraulic conductivity measurements. The sandy soil which was a product of weathered granite and whose mean grain size was $0.38\sim1.97mm$ showed regression curves of $y=6.0E-5x^{-1.4}$ in a correlations between hydraulic conductivity and particle variances. Accordingly, it is clearly concluded that making estimates with-out any consideration about particle variances can produce serious errors.