• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.3
• /
• pp.297-303
• /
• 2024

In this study, KTN heterolayer thin films were fabricated by alternately stacking films of K(Ta_0.70Nb_0.30)O₃ and K(Ta_0.55Nb_0.45)O₃ synthesized using the sol-gel method. The sintering temperature and time were 750℃ and 1 hour, respectively. All specimens exhibited a polycrystalline pseudo-cubic crystal structure, with a lattice constant of approximately 0.398 nm. The average grain size was around 130~150 nm, indicating relatively uniform sizes regardless of the number of coatings. The average thickness of a single-coated film was approximately 70 nm. The phase transition temperature of the KTN heterolayer films was found to be approximately 8~12℃. Moreover, the 6-coated KTN heterolayer film displayed an excellent dielectric constant of about 11,000. As the number of coatings increased, and consequently the film thickness, the remanent polarization increased, while the coercive field decreased. The 6-coated KTN heterolayer film exhibited a remanent polarization and coercive field of 11.4 μC/cm² and 69.3 kV/cm at room temperature, respectively. ΔT showed the highest value at a temperature slightly above the Curie temperature, and for the 6-coated KTN heterolayer film, the ΔT and ΔT/ΔE were approximately 1.93 K and 0.128×10^-6 K·m/V around 40℃, respectively.

• Journal of Korea Foundry Society
• /
• v.44 no.1
• /
• pp.9-15
• /
• 2024

In this study, in order to improve the lifespan of parts made of manganese steel, manganese steel was cast by varying the amount of Ti added to the steel. In order to confirm the characteristics of the cast material, processing characteristics including tensile and surface characteristics and bearing ratio were investigated. It was confirmed that when the amount of Ti added to high manganese steel exceeds 0.5%, the strength of the alloy is improved due to grain refinement, and fine carbides are formed inside the steel. This results in increased resistance to surface wear compared to the alloy with only Mn added. There was no significant difference in the increase in tensile strength as the Ti content in manganese steel was increased. However, inclusion of Ti showed a small but greater effect on wear resistance compared to Mn, and the size and the distribution of carbides become coarse depending on the Ti content. and was evenly distributed. It was confirmed that the strength and surface properties of manganese steel can be improved by the addition of Ti to improve the lifespan of parts made with this steel. It was found that Ti is effective in developing materials with excellent wear resistance due to refinement of dendrite crystal grains. In the samples where Ti was added, the carbide appears to increase the resistance to surface roughness, and due to the nature of Mn steel, surface hardening begins to occur, which appears to extend the life.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.1
• /
• pp.52-60
• /
• 2006

This study investigated how wood properties (i.e., annual rings, sapwood, heartwood, and cracks) might affect preservative treatment in Japanese larch (Larix leptolepis) round-wood product. We specially focused on small-diameter (~10 cm diameter) wood that is commercially sold in market. Among 100 wood samples, the groups of sample with 13~16, 17~20 annual rings represented 33 and 27 in each frequency, while 2~3 and 4~5 mm annual ring width accounted for 72 and 68 in frequency. More than a half (54%) of wood samples contained a mix of heartwood and sapwood in its surface. The rest (46%) had only heartwood exposed in the wood surface. A wide range of checks were showed in the wood samples, but the highest frequency was observed in samples with 1~6 surface (1~14 mm in size) checks and 1~4 end-grain (8~14 mm in size) checks in each round-wood sample. Pressure treatment resulted in a wide range of penetration of ACQ (Alkaline Copper Quat) into the wood, showing $4.3{\pm}4.19mm$ penetration in the wood samples contained a mix of heartwood and sapwood in its surface. However preservative treatment was much less effective for the heartwood only wood samples, ranging average 1.3 mm with ACQ and 1.1 mm with CCA (Chromated Copper Arsenate). These penetration results shown in heartwood samples did not meet the penetration standard that is required for H3 by the Korean Forest Service in relation to wood preservation treatment. These low penetration results were not significantly improved even if we incised wood samples to improve treatment effect, showing only small increase of 0.7 mm with ACQ and 0.6 mm with CCA. When preservative treatment was tested with heartwood, penetration of preservatives decrease with increase of annual rings per a cross-section area (r=0.5345). We also found that the length and number of check had no effect on preservative treatment, showing r=0.1301 and r=0.1802, respectively.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.1
• /
• pp.40-49
• /
• 1999

A laboratory flume experiment, using turbulence-generating acryl tank and natural sediments, was conducted to investigate the effects of salinity, concentration of suspended sediment, turbulence and clay minerals on the flocculation and settling of fine-grained suspended sediments. While experiments were run, a sequence of water samples were taken near the bottom of the tank to analyze the variations of size distribution and relative contents of clay minerals. The results of the salinity experiment indicate that median settling velocity ($W_{50}$) increases linearly with salinity. Different settling processes of suspended sediments under variable concentrations appear to be predictable, depending upon the range of the suspension concentration. At concentrations less than 200 mg/l, $W_{50}$ is rarely varied with concentration probably because of the individual--grain settling mode. In the range of 200 to 13,000 mg/l show $W_{50}$ and concentration a good relationship following an empirical formula: $W_{50}=0.45C^{0.44}$. This relationship, however, no longer holds in concentrations exceeding 13,000 mg/l; instead, a more or less reverse one is shown. This result suggests an effect of hindered settling. The turbulence effect is somewhat different from that of concentration. Turbulence accelerates the flocculation and settling susepended sediments at low concentration (200 mg/l), whereas at high concentration turbulence breaks floes down and impedes the settling. Size distribution of suspended sediments sampled near the bottom of the tank tend to be more negatively skewed and leptokurtic in turbulent conditions compared to those in static conditions. The clay mineral analysis from the sequential water samples shows that over time the content of smectite decreases most rapidly with illite remaining concentrated in suspension. This means that smectite, among other clay minerals, plays the most effective role in the flocculation of fine-grained sediment in saline water.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.629-635
• /
• 2001

To improve the ductility of $A1_3Hf$ intermetallics, which are the potential high temperature structural materials, the mechanical alloying behavior. the effect of Cu addition on the $Ll_2$ phase formation and the behavior of vacuum hot-pressed consolidation were investigated. During the mechanical alloying by SPEX mill, the $Ll_2 A1_3Hf$ intermetallics with the grain size of 7~8nm was formed after 6 hours of milling in Al-25at.%Hf system. The $Ll_2$ Phase of Al_3Hf$ intermetallics with the addition of 12.5at.%Cu, similar to that of the binary Al-25at.% Hf, was formed, but the milling time necessary for the formationof the $Ll_2$ phase was delayed form 6 hours to 10 hours. The lattice parameter of ternary $Ll_2(Al+Cu)_3Hf$ intermetallics decreased with the increase of Cu content. The onset temperature of $Ll_2$ to $D0_{23}$ phase in $Al_3Hf$ intermetallics was around 38$0^{\circ}C$, the temperature upon completion varied from 48$0^{\circ}C$ to 5$50^{\circ}C$ as the annealing time. The onset temperature of $Ll_2$ to $D0_{23}$ phase transformation in $(Al+ Cu)_3Hf$ intermetallics increased with the amount of Cu and the highest onset temperature of $700^{\circ}C$ was achieved by the Cu addition of 10at.%. The relative density increased from 89% to 90% with the Cu addition of 10at.% in $Al_3Hf$ intermetallics hot-pressed in vacuum under 750MPa at 40$0^{\circ}C$ for 3 hours. The relative density of 92.5% was achieved without the phase transformation and the grain growth as the consolidation temperature increased from 40$0^{\circ}C$ to 50$0^{\circ}C$ in $(Al+Cu)_3Hf$ intermetallics hot-pressed in vacuum under 750MPa for 3 hours.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.684-696
• /
• 1995

A mutant for chalky endosperm and genetic male sterility (GMS) was newly developed in rice. The two characters were found to be controlled by single recessive gene which has pleiotropic effect, indicating that chalky seeds should be GMS seeds in segregating populations. Chalky seeds showed the same shape and size as normal seeds. However, starch composition of central part of endosperm was looser and shape of starch granules was rounder compared with normal endosperm, resulting in significantly lower grain weight, absolute density and grain hardness in chalky grains than in normal ones. Amylose content and gel consistency of chalky grains were much lower and harder, respectively. Male sterile plants showed much shorter plant height, poorer panicle exsertion and lesser panicle number compared with normal plants. Microspore abortion stage in pollen developmental process was observed as before meiosis. Male sterility of the mutant was stable regadless of temperature and day length. A system breeding hybrid rice using this mutant was discussed, comp ring with other systems utilizing cytoplasmic-genic male sterility(CGMS) and environment sensitive GMS(EGMS). Separation of GMS seeds in mixed seed bulks by specific gravity (1.14∼1.16g / cm3) was successful about 85∼90%. But some mixed normal plants were seemed to be easily removed by the apparent difference in growth characters at seedling stage. The highest natural outcrossing rate of this GMS line was as 17.3 % in a plot treated with 2-row pollinator, I-row GMS, and GA3 + cutting of flag leaf + pollen-scattering by rope.

• Journal of the Korean Magnetics Society
• /
• v.5 no.4
• /
• pp.269-274
• /
• 1995

The basic composition of Mn-Zn ferrite was $Mn_{0.631}Zn_{0.316}Fe_{2.053}O_{4}$(specimen A), $Mn_{0.584}Zn_{0.312}Fe_{2.104}O_{4}$(specimen B) and $Mn_{0.538}Zn_{0.308}Fe_{2.154}O_{4}$(specimen C) with additional 0.1 mol % $CaCo_{3}$ and 0.04 mol % $V_{2}O_{5}$. For high per¬meability and acceleration of grain growth, $CaCo_{3}$ and $V_{2}O_{5}$. was added. The mixture of the law materials was calcinated at $950^{\circ}C$ for 3 hours and then milled. The compacts of toroidal type were sintered at different temperature($1250^{\circ}C$, $1300^{\circ}C$, $1350^{\circ}C$) for 2 hours in $N_2$ atmosphere. The effects of the various raw material composition and sintered temperature on the physical properties of Mn-Zn ferrite have been investigated. They turned out to be spinel structure by X-ray diffraction and the size of grain from SEM was from $18\;\mu\textrm{m}\;to\;23\;\mu\textrm{m}$. As the sintering temperature was increased from $1250^{\circ}C$ to $1350^{\circ}C$, the initial permeability and magnetic induction has increased and the both of Q factor and coercive force has decreased. The coercive force and curie temperature were almost the same at each specimen Their values were about 0.45 Oe and $200^{\circ}C$. The frequency of specimen will used in the range from 200 kHz to 2 MHz. The basic composition of $Mn_{0.584}Zn_{0.312}Fe_{2.104}O_{4}$(specimen B) sintered at $1300^{\circ}C$ shows the best results at magnetic induction (Br & Bm).

• Korean Journal of Environmental Biology
• /
• v.32 no.2
• /
• pp.138-152
• /
• 2014

The objective of the study survey was to determine the effect of marine sand extraction on community composition and rate of recolonization of the meiobenthos following cessation of mining activities. Because of meiobenthic distribution in nature, high abundance, intimate association with sediments, fast reproduction, benthic larva period, sensitivity to pollution and rapid life histories, meiobenthos are widely regarded as ideal organisms to study the potential ecological indicator of natural and anthropogenic stresses. The community structure of meiobenthos was studied at seven stations within sandy tidal and sub tidal zones in Jangbongdo in the Yellow Sea, Korea from Aug. 2006 to Dec. 2007. Meiobenthic samples were collected by three core samples, with a 3.6 cm in diameter, from each sediment sample taken with a Smith-McIntyre Grab. It was found that sand mining often causes complete removal of the sediment and the damage to the habitats of meiobenthos. This study in the effect showed that sand mining resulted in a reduction in total abundance and biomass of meiobenthos in mining area. The finding of this study further showed that initial restoration of abundance and biomass within one year of the cessation of sand mining.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.61-71
• /
• 1971

This study was conducted in order to investigate the effects of slaked lime and borax on the Akiochi paddy field. The pot trial(slaked lime was treated 0, 6, 10, 15g and borax 0, 0.75, 1.5g per pot) and the field trial(slaked lime was treated 0, 100, 200kg and borax 0, 10, 30, 50kg per 10are) respectively. The results are summarized as fo11ows. I. Pot Trial: 1. In a heavy treated of borax, appeared chlorosis on whole leaves(bottom) in early growing stage, However, in about 25 days after transplanting, these chlorosis were disappeared gradually. And in proportion to close by maturity after the ear-heading, changed to dark brown color and rolled at the end of upper leaves, finally withered. At the same time the part of the end of grains was also colored to dark brown. 2. Slaked lime effected to increase the ti1lering, hence increased the number of ear, on the other hand, borax showed the tendency of repression the tillering, conversely. 3. Borax effected to hurried up to heading date of rice plant, to which borax had been the plot of B$_1$ to 3 days and B$_2$ to 5 days, hurried up than control respectively, regardless of the quantities of slaked lime application. 4. According to the application of borax, the length of culm were shortened, otherwise the length of panicle were longished, then no recognized the. independent effect of slaked lime. 5. The number of grains per panicle were seemed like increased by treatment of slaked lime, but the grain were decreased in the heavy treatment of slaked lime and borax. These phenomena were showed in ratio of maturity likely tendency as above. 6. In the 1, 000 grains weight of brown rice, in the case of slaked lime was almost no significant, otherwise by increase the application of borax, increased the weight of 1, 000 grains and the size of the grains was greater. 7. The weight of rough rice and straw were showed the same tendency as the number of grains and maturity ratio. particularly, showed the phenomenon of the reduction by the heavy application of borax. II. Field trial: 1. In a heavy treated of borax, appeared chlorosis in a early growing stage, according to close by maturiting date after the ear-heading changed to dark brown the end of upper leaves, finally dried. 2. Slaked lime application accelerated the growth and increased the number of ear, but borax showed the tendency of repression the tillering. 3. Borax effected to hurried up to heading date of rice plant, according to heavy treatment of borax quickened heading date for 4 to 5 days. 4. As a whole, culm length was repressed by borax treatment. 5. Borax application 10kg per 10are advanced progress the maturity, but in the case of above 30kg per 10are of borax showed the tendency obstruction the maturity. 6. The yield of rough rice and brown rice recognized the independent effect of slaked lime and borax, respectively. the yield was decreased by the abundant of borax.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.105-120
• /
• 2005

This study was carried out at Reed Marsh of Sihwa Lake from July 2003 to June 2004. We observed total(sum of maximum population) 5,752 individuals of 70 species including 12 species of ducks, 10 species of egrets, 6 species of wagtails and buntings, 4 species of eagles. The most dominant species was Spotbill Duck(Anas poecilorhyncha - 3,518 individuals, 61.16%), and other species were Mallard(Anas platyrhynchos - 540 individuals, 9.39%), Great Reed-Warbler(Acrocephalus arundinaceus - 217 individuals, 3.77%). Reed Marsh of Sihwa Lake were observed many kinds of protected species such as Great Bittern(Botaurus stellaris), Mandarin Duck(Aix galericulata), Chinese Sparrow Hawk (Accipiter soloensis), Eurasian Sparrow Hawk(Accipiter nisus), Japanese Buzzard(Buteo buteo), Hen Harrier(Circus cyaneus), Eurasian Hobby(Falco subbuteo), and Common Kestrel(Falco tinnunculus). Since the Reed Marsh of Sihwa Lake arrived many individuals of waterbird, crop damage by the waterbird occurred in the surrounding rice fields. It was an area adjacent to the reed marsh of sihwa lake such as Yoopori and Samhwari Bibongmyoun, Yamokri Maesongmyoun Hwaseong City. Bird of crop damage was ducks openly. The most species was Spot-billed Duck. Crop damage types by the Spot-billed Duck were grazing, used the grain up or lower in quality with step on the rice. Crop damage size was about 560bags of rice during the one month on August 2002. In 2003, After carrying out the various crop damage reduction countermeasures, which measured crop damage size in 2002's crop damage area. It happened about 152bags of rice during the two months from on August to September 2003. Migration routes of Spot-billed Duck were that it was migrated from up the sihwa lake to reed marsh. It took a rest at reed marsh and migrated the surrounding rice fields for the feeding action. In 2002, it was migrated direct from up the sihwa lake to in surrounding rice fields. But as environment of reed marsh was improved better than 2002, it was migrated to reed marsh because of reducing the energy attrition rate. Crop damage reduction countermeasures are get on ears to use explosion machine, searchlight, start-gun and patrol at regular intervals. Which was an effect short term. Indirect method is to make a feeding area of substitution at up the sihwa lake and reed marsh of sihwa lake.