• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.4
• /
• pp.239-249
• /
• 2020

Rice flour varieties have been developed to replace wheat, and consumption of rice flour has been encouraged. damage related to pre-harvest sprouting was occurring due to a weather disaster during the ripening period. Thus, it is necessary to develop pre-harvest sprouting rate prediction system to minimize damage for pre-harvest sprouting. Rice cultivation experiments from 20 17 to 20 19 were conducted with three rice flour varieties at six regions in Gangwon-do, Chungcheongbuk-do, and Gyeongsangbuk-do. Survey components were the heading date and pre-harvest sprouting at the harvest date. The weather data were collected daily mean temperature, relative humidity, and rainfall using Automated Synoptic Observing System (ASOS) with the same region name. Gradient Boosting Machine (GBM) which is a machine learning model, was used to predict the pre-harvest sprouting rate, and the training input variables were mean temperature, relative humidity, and total rainfall. Also, the experiment for the period from days after the heading date (DAH) to the subsequent period (DA2H) was conducted to establish the period related to pre-harvest sprouting. The data were divided into training-set and vali-set for calibration of period related to pre-harvest sprouting, and test-set for validation. The result for training-set and vali-set showed the highest score for a period of 22 DAH and 24 DA2H. The result for test-set tended to overpredict pre-harvest sprouting rate on a section smaller than 3.0 %. However, the result showed a high prediction performance (R2=0.76). Therefore, it is expected that the pre-harvest sprouting rate could be able to easily predict with weather components for a specific period using machine learning.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.6
• /
• pp.647-650
• /
• 1996

Fifteen sheep were used in a trial which compared the feeding value of whole barley gain and cottonseed cake as supplements to a basal diet of leaves of fourwing saltbush (Atriplex canescens). Diet SB contained 700 g (air-dry matter) of saltbush alone, diet SB + BG contained 700 g SB with 400 g whole barley grain and diet SB + CS contained 700 g SB with 400 g cottonseed cake. The digestibility of the dry matter of diets SB (69%) and SB + CS (70%) were lower (p < 0.001) than of diet SB + BG (76%). Sheep offered SB alone daily lost 80g whereas those fed the other diets gained 11 g (SB + CS) or 17 g (SB + BG) per day. Daily water consumption of the sheep offered the three diets was similar (p > 0.05), but their water consumption was higher (p < 0.001) than that of sheep offered daily 700 g wheat straw and 200 g barley grain. The results indicate that, at the levels of feeding used, barley grain and cottonseed cake had similar value as supplements to fourwing saltbush harvested in summer. The addition of the supplement allowed the sheep to gain some live weight. However, the presence of saltbush leaves in the diet resulted in higher water intakes by the sheep.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.632-638
• /
• 2002

Electron beam (EB) and Gas tungsten arc (TIG) welds were performed on 12.7 mm thick Ti-6Al-4V plate (ASTM Titanium Grade 5). Charpy-V toughness and hardness, as well as, microstructure of the welds and penetration from the macrostructure were studied. It appears that by EB welding rather smaller $\beta$-grains than with TIG welding can be obtained. Next to the fusion line the $\beta$-grain size in the HAZ was 50 ${\mu}{\textrm}{m}$l while in the weld metal it was 150 ${\mu}{\textrm}{m}$. Charpy-V toughness of the EB weld metal was equal or even better to that of base metal, which shows that the $\alpha$-martensite per se is not particularly brittle if only the grain size is fine enough. This is similar to behavior of low carbon martensite in steel. The grain size was studied with light optical and scanning electron (SEM) microscopes. Thus for products, for products which can be manufactured automatically with very narrow fit, the EB welding of Ti-6Al-4V appears to yield satisfactory toughness without any complex post weld heat treatment. ill this study as in earlier studies the TIG welds gave lower toughness than that of the base material due to the higher heat input and slower cooling as compared to EB welding.

• Plant Disease and Agriculture
• /
• v.5 no.1
• /
• pp.1-7
• /
• 1999

The grain rot of caused by Bukholderia glumae was fist reported in japan in 1955 and then reported in other countries as well as in Korea in 1986. The pathogen causes both seedling and grain rot of rice but it cannot attack any other parts of adult rice plant. Bacterial colonies grow slowly, and are circular and greyish white. The causal bacterium is Gram-negative and rod shape with 1-3 polar flagella, and produce a diffusible yellow-greenish nonfluorescent pigment on King's medium B. Biochemical characteristics such as negative in arginine dehydrolase, oxidase reaction and nitrate reduction and positive in lecithinase, and the utilization of L-arginine and inositol are useful in differentiation of this from other nonfluorescent bacteria pathogenic to rice. This pathogenic bacterium had belonged to the genus of Pseudomonas but recently was transferred to the new genus Burkholderia on the basis of physiological characteristics and DNA-DNA hybridization data. However, other characteristics such as colony heterogenicity or colonial variation after subcultures, phytotoxin, secreting antibiotics, and relationship between yellow greenish pigment production and pathogenicity need to be clarified more. To develop an effective control strategy for this disease, understanding of detailed life cycle of the disease and critical environmental factors affecting disease development is prerequisite. Although 5,435 ha of rice paddy in Korea was infested during 1998, there is no exact estimation of yield losses and distribution of the pathogen. The review will focus on recent progress on the understanding of the bacteriological and ecological characteristics of the causal bacterium and control means of the disease.

• Journal of Korea Foundry Society
• /
• v.29 no.5
• /
• pp.213-219
• /
• 2009

Optimum conditions for production of semi-solid Al-Zn-Mg alloy billets was carried out by the Taguchi design method. And, Al-Zn-Mg alloy billets contained Sc (free, 0.1 and 0.3 mass %) were fabricated at optimum conditions. Evolution of microstructure in semi-solid state was investigated through various liquid fractions, holding times and holding temperatures. The Al-Zn-Mg alloy billets reheated at $615^{\circ}C$ during 30min are grain growth and it was fractured due to increasing liquid fraction before quenching. And, during reheating up to $600^{\circ}C$, grain growth of Al-Zn-Mg alloy billets contained Sc (0.1 and 0.3 mass %) was not occurred in comparison with those of Al-Zn-Mg alloy without Sc. It was thought that $Al_3Sc$ phases have a pinning effect in grain boundary and Sc content of 0.1 mass% is able to inhibit grain growth effectively through reheating process.

• Journal of Plant Biotechnology
• /
• v.49 no.1
• /
• pp.99-105
• /
• 2022

This study assessed the antioxidant and anti-inflammatory activities of leaf extracts from grain amaranths (Amaranthus spp.). Among all the extracts, the ethanol extract of Amaranthus cruentus leaves (Ar) exhibited the highest antioxidant activity, including the DPPH free radical scavenging activity and ORAC. In addition, Ar strongly inhibited nitric oxide production by suppressing the MEK/ERK signaling pathway in lipopolysaccharide-stimulated RAW264 murine macrophages. HPLC analysis revealed 13 polyphenolic compounds in the leaf extracts of grain amaranth and indicated that Ar contained more rutin than the other extracts. Taken together, these results show the impact of species diversity on the phytochemical contents and bioactivities of plant extracts and suggest that the nonedible parts, such as leaves, of A. cruentus should be considered for use as crude drugs and dietary health supplements.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.3
• /
• pp.183-189
• /
• 2006

Six japonica and three Tongil type cultivars that were released in different years and planted to a large area during different periods were grown at the experimental farm of Seoul National University in 2001 and compared for traits related to dry matter production and grain yield. The varieties chosen were Jodongji released in 1896, Paldal in 1944, Jinheung in 1962, Nagdong and Tongil (Tonsil type) in 1971, Milyang#23 (Tongil type) in 1976, Hwasung in 1986, Ilpum in 1991, and Dasan (Tonsil type) in 1996. The more recent cultivars tended to have lower canopy light extinction coefficients (K). The K value was 0.601 in the oldest cultivar, Jodongji, and decreased below 0.5 in the cultivars released since 1971. Radiation use efficiency (RUE) was significantly different among cultivars before heading stage, showing no consistent tendency with the year of release and not significantly different after heading. Leaf area duration (LAD) was significantly different among varieties, and LAD values tended to be higher in the more recent cultivars. In particular, this tendency was more obscure in Tongil type cultivars. LAD of whole growth period had a significantly positive correlation with dry matter yield at harvest $(r=0.776^*)$. Dry matters measured at heading and harvest tended to be higher in recently released cultivars, but not significantly. The grain yield of Jodongji was the lowest but there was no significant difference among the other varieties in japonica, while higher yield occurred in the more recent Tongil type. Grain yield was correlated with grain number per square meter, and the more recent Tongil type cultivars had the greater grain number per square meter, In conclusion, not only the dry matter and grain yield but also related traits except K value showed no clear changes when compared with the year of their release in japonica cultivars. However, the increased grain yield in the more recent Tonsil type cultivars might have resulted from the enhanced LAD that lead to the higher dry matter production and in turn to the enlarged sink size.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2013.12a
• /
• pp.93-93
• /
• 2013

In the talk, the present research and production status of NdFeB magnets in China is outlined. The main research on NdFeB magnets at Zhejiang University is presented. The microstructural restructuring of grain boundaries of sintered NdFeB is focused. Through microstructural restructuring, the corrosion resistance of sintered NdFeB can be effectively improved, and NdFeB magnets with high coercivity and low heavy RE contents can be fabricated.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.338-338
• /
• 2017

One of the problems in increasing rice production is getting lines or varieties that have high adaptability so that able to produce maximum production in a variety of environmental conditions. One strategy that can be done to get adaptive varieties is through the improvement of native varieties. This research was conducted in rain fed paddy field, Aceh province, Indonesia from June to September 2014. The texture of the soil was clay-loam with the soil pH ranged from 6.5-6.7. Five potential progenies of rice from crossing between native Indonesian rice with introduced rice varieties consist of C3, C4, S3, S5, S6 were used in this study. Besides that, one national rice variety Ciherang also used as a comparison. The plants were growth in the plot with the size of $2m{\times}1.4m$ with plant distance was $20cm{\times}20cm$. The fertilizers used in this study were Urea, NPK, and KCl. Randomized block design with 6 rice progenies/variety and 3 replications were used in this study. There were 18 experimental units and each experimental unit had 10 samples for the sources of data. The variables that were observed in this study including plant height at harvesting time, number of productive tiller, the percentage of empty grains and filled grain per panicle, weight of filled grains per hill, weight of filled grain per plot and yield potential per hectare. Analyzed were also conducted for the depth of root penetration, dry-root weight, dry-shoot weight, shoot-root weight ratio and its correlation with the weight of filled grain per hill. The research results show that there was significant difference on plant height at harvesting time, number of productive tillers, the percentage of empty grains and filled grain per panicle, weight of filled grains per hill, weight of filled grain per plot and yield potential per ha (p>0.01) among the treatments. In addition, depth root penetration, dry-root weight, dry-shoot weight, shoot-root weight ratio also had significant difference (p>0.01) among the treatment. The highest plant at harvesting time was found in S6, reaching 129.8 cm and the shortest plants was found in C3 reaching 107.5 cm. The largest number of productive tillers and the highest percentage of filled grains per panicle were found in Ciherang reaching 10.5 tillers and 80.7% respectively. Ciherang also had the heaviest weight of filled grains per hill and per plot reaching 21.1 g and 2.18 kg respectively. Whereas, S6 had the lowest number of tillers and the lowest percentage of filled grain per panicle.. The highest yield potential per ha was found in Ciherang reaching 7.79 tons. Among the progenies, S5 had the highest yield potential reaching 5 tons/Ha. The result also showed significant relationship between shoot-root weight ratio with weight of filled grains per hill. The highest value of shoot-root weight ratio (1.57) in Ciherang is thought had closed relationship with its yield potential.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.4
• /
• pp.342-351
• /
• 1990

Experiments were conducted to find out the possibilities of producing good quality seed of summer type soybean at Chuncheon, 74m above sea level and Jinboo, 600m above sea level in 1987. Local variety, Cheonan Jaelae was used. Seeds were sown June 25 harvested five times from 35 days after flowering with five days interval to 55 days. Vegetative period was longer in the early planting and high cool area, Jinboo, which resulted longer stem length than the late planting and in the plain area, Chuncheon. Pod number and 100 grain weight were shown more and heavier in Jinboo. Earlier planting and later harvesting resulted more pod number and heaveier 100grain weight. Grain yield was heigher in Jinboo, and earlier plainting shown more grain yield and its difference was greater in Jinboo. Long grain filling duration resulted more grain yield. Unripened seeds were produced more by earlier planting with earlier harvesting and earlier planting with late harvesting showed the high rates of pod and stem blight (Diaporthe Phaseolorum). Seed With high moisture content by early harvesting showed more rotten seeds in all planting dates production was more advantageous in the high cool area, Jinboo. Optimum planting date was between May 15 and June 5. Harvesting was desirable about 45-50 days after flowering with heigher germination rate seed yield.