Proceedings of the Korean Society for Agricultural Machinery Conference
/
1993.10a
/
pp.768-778
/
1993
The system is designed for the production and processing of feed, fertilizer, sugar , and grain. It can be used to weigh and transport automatically their pellet, power or nonstickness materials. In this system, we use discontinuous totalising automatic weighing instruments to weigh materials. It is a closed-cycle control system controlled by industrial controlling computer STD bus. The system used for processing grain and feed can improve the quality of products , carry out scientific management, increase productivity and decrease the intensity of labour
Recently, various Ni doping systems and thermal annealing systems have been developed for fabrication of polycrystalline silicon film using SGS (super grain silicon) for medium and largesize AMOLED panels. In this study, we compare the potential of Ni doping systems including ALD (atomic layer deposition), AMD (atmospheric metal deposition), in-line sputter, and crystallization annealing systems including batch type furnace, inline furnace, and RTA (rapid thermal annealing) developed for the SGS method. Additional requirements for those systems to be used for mass production of large AMOLED TVs are suggested based on evaluation results for both poly-Si films and TFT backplanes.
The study was conducted to evaluate enzose (corn dextrose), a corn milling byproduct, as substitute for corn grain as energy in growing lambs. Five iso-caloric and iso-nitrogenous diets were formulated. The control diet (E0) had no enzose whereas enzose replaced 20, 40, 60 and 80% corn grain in E20, E40, E60 and E80 diets on the basis of energy supply, respectively. Fifty growing lambs were divided into 5 groups, 10 animals in each, in a randomized complete block design. Nutrients (dry matter, crude protein, neutral detergent fiber and acid detergent fibre) intake and digestibilities increased with gradual replacement of corn grain by enzose. Lambs fed E80 diet also retained higher nitrogen (N) than those fed E0 diet. Plasma glucose, $T_3$ and $T_4$ increased while urea N decreased in lambs receiving higher enzose content. Maximum weight gain was recorded in lambs fed diets containing maximum concentration of E as a replacement for corn grains. A better feed conversion ratio was recorded in lambs fed E80 compared with those fed E0 diet. The study suggests that enzose can be used as an economical feed ingredient to replace corn grain upto 80%, without any adverse effects on growth performance of growing lambs.
Proceedings of the Korean Society of Crop Science Conference
/
1998.10a
/
pp.159-173
/
1998
Assuming the united Korea, total population is estimated to be 70 million and grain demand for the people is estimated to reach 30 million metric tons. Cultivated land in North Korea is about the same as South Korea i.e. 2 million hectares. However grain production in North Korea is about one half of South Korea's, 6 million metric tons in the South and 3 million metric tons in the North a year. This implies that the United Korea need to import more than 20 million metric tons of grain a year and it will trigger many economic and social problems for the United Korea. In order to meet deficient grain supply, the United Korea can choose three possible policy options; importation of grains or increased investment in foreign agricultural development or increase in domestic supply Among the possible policy options, increase in domestic supply is desirable and can be achieved by developing North Korea's grain supply potential. North Korean agricultural development can also be achieved most effectively through cooperation between the South and North. An effective policy option for agricultural cooperation between the South and North is supply of agricultural inputs such as fertilizer and pesticides and exchanges of agricultural technology. Cooperation between the South and North in the agricultural sector should be achieved and developed further to solve the potential food problem before unification.
Islam, M.R.;Ishida, M.;Ando, S.;Nishida, T.;Yoshida, N.;Arakawa, M.
Asian-Australasian Journal of Animal Sciences
/
v.17
no.2
/
pp.183-192
/
2004
The effect of eight varieties of grain and forage type whole crop rice (Oryza sativa L Japonica) each harvested at four stages of maturity were investigated for morphology and yield, proportion of botanical fractions, fermentatability and chemical composition in an $8{\times}4$ factorial experiment. All crops were sown in 1997 at Saitama Prefecture, Japan under identical condition and harvested on 10, 22, 34 and 45 days after flowering in 1998. Total DM yield of forage type varieties was similar to that of the highest yield of grain type varieties. However, while yield of forage type varieties was attributed to higher proportion of straw than head, the reverse was in the case of grain type varieties. Yield in line with the proportion of head increased (p<0.001), but in contrast proportion of straw decreased (p<0.001) with the increase in maturity. Silage fermentability of grain type varieties was better than forage type varieties. Fermentability improved with the increase (p<0.001) in maturity suggesting that the moisture content should be reduced to improve fermentation quality. Forage type varieties contained higher (p<0.001) ash, crude fat (EE), organic cell wall (OCW) and acid detergent fiber (ADF), but contained lower crude protein (CP), organic cell content (OCC), CP in OCC and nitrogen-free cell wall extract (NCWFE) than the grain type varieties. The ash, CP, EE, Oa (60% digestible OCW), Ob (40% digestible OCW), OCW, ADF and acid detergent lignin (ADL) decreased (p<0.001), but OCC and NCWFE increased (p<0.001) with the increase in maturity. It is concluded that stage of maturity not only increases yield and proportion of head, but also improved the fermentation quality and increases quality chemical composition (except CP) of whole crop rice. Forage type varieties may be as good as grain type varieties in terms of yield, but fermentation quality and chemical composition may not be as good as that of grain type varieties.
Kim, Do Hyung;Choi, Seong Ho;Park, Sung Kwon;Lee, Sung Sill;Choi, Chang Weon
Asian-Australasian Journal of Animal Sciences
/
v.31
no.1
/
pp.80-85
/
2018
Objective: This study was conducted to investigate the effect of corn grain particle size on ruminant fermentation and blood metabolites in Holstein steers fed total mixed ration (TMR) as a basal diet to explain fundamental data of corn grain for cattle in Korea. Methods: Four ruminally cannulated Holstein steers (body weight $592{\pm}29.9kg$) fed TMR as a basal diet were housed individually in an auto temperature and humidity modulated chamber ($24^{\circ}C$ and 60% for 22 h/d). Treatments in a $4{\times}4$ Latin square design were TMR only (control), TMR with whole corn grain (WC), coarsely ground corn grain (CC), and finely ground corn grain (FC), respectively. The corn feeds substituted for 20% energy intake of TMR intake. To measure the ruminal pH, ammonia N, and volatile fatty acids (VFA), ruminal digesta was sampled through ruminal cannula at 1 h intervals after the morning feeding to determine ruminal fermentation characteristics. Blood was sampled via the jugular vein after the ruminal digesta sampling. Results: There was no difference in dry matter (DM) intake between different corn particle size because the DM intake was restricted to 1.66% of body weight. Different corn particle size did not change mean ammonia N and total VFA concentrations whereas lower (p<0.05) ruminal pH and a ratio of acetate to propionate, and higher (p<0.05) propionate concentration were noted when the steers consumed CC compared with WC and FC. Concentration of blood metabolites were not affected by different particle size of corn grain except for blood triglyceride concentration, which was significantly (p<0.05) increased by FC. Conclusion: Results indicate that feeding CC may increase feed digestion in the rumen, whereas the FC group seemed to obtain inadequate corn retention time for microbial degradation in the rumen.
This study was conducted to get basic information of dry matter production and agronomic characteristics for increasing grain ripening in rice cultivar with large grains. Three cultivars which have different grain size were used. Of the two large grain cultivars, SR7796-3-1-5-1-l(SR7796F$_{7}$) had long culm and SR11269-13-3-4-2(SR11269F$_{6}$) had short culm. On the other hand, Tamjinbyeo was recommended cultivar had medium size of grain and culm. LAI was highest in Tamjinbyeo, followed by the SR11269F$_{6}$ and SR7796F$_{7}$, LAI decrement was higher in large grain cultivars than that of Tamjinbyeo after 20days after heading. Total dry weight(TDW) of areal part was highest in SR11269F$_{6}$, followed by the Tamjinbyeo and SR7796F$_{7}$. Dry weight (DW) of stem (leaf sheath+culm) at harvesting stage was decreased 15%, 12% in Tamjinbyeo, SR11269F$_{6}$, respectively, but was increased 5% in SR7796F$_{7}$ compared to heading stage. In distribution rate of each organ to TDW, distribution rate of leaf blade was low in large grain cultivar, but that of stem in Tamjinbyeo, SR7796F$_{7}$ and SR11269F$_{6}$ was 36%, 38% and 42%, respectively. In canopy architecture leaf blade weight was the highest 30~40cm, 40~50cm and 70~8Ocm above the ground in SR11269F$_{6}$, Tamjinbyeo and SR7796F$_{7}$, respectively. Range of panicle distribution in the canopy was 40cm in Tamjinbyeo, and was 70cm in large-grain cultivars. The results suggest that it has to take a growing interest in developing culture method for increasing LAI during growth stage, especially, around heading, in keeping green leaf till ripening stage and also in growing unformly plant within rice hill in large grain cultivars.cultivars.ltivars.
Post-harvest treatment for barley production requires many steps including drying, cleaning, and packing, and these steps be needed many labor input. Rice processing complex (RPC) is useful for post harvest management system in rice production. However, it is rare to be used for barley production. This study was conducted to explore the variations of quality and labor saving between conventional method and bulk-management system in post-harvest using RPC. The sorting rate was not different between manual method and bulk management. The hardness of non-polished grain was ranged 10,175-10,329 g/$3.14mm^2$, and that for non-polished grain was higher than that for polished grain, but there was not different between drying method. There was not be showed the hunter's value such as L, a and b according to drying method. Cooking characters such as water absorption ratio, swelling ratio, and water soluble extracts by circulated or continued dryer was higher than manual drying using solar heat. Labor input per ha for each cultivation process in bulk-management of barley using rice processing complex was 21 hours, compared to 46 hr/ha in the conventional method, labor input was greatly saved by up to 54.3% in the post-harvest bulk management system.
The object of this study was to identify the production technique and immediate constituent of lingerie by examining the materials and the sewing techniques. Various papers are referenced for theoretical study and the elements and techniques of lingerie are analyzed based on photographical materials. From the late 20C century to the present time was the research time period. This paper concludes as follows: 1 Decorative method: Lace, Ribbons, piping, elastic bands were some of the decorative materials attached to the garments by zigzag stitch. 2. Flat pattern making: Lingerie patterns were drafted in smaller size than the patterns of outer garments. Bias cut would be applied for the noll-stretchable fabrics. 3. Draping: Bias grain would be applied for the non-stretch fabric. When draping stretch fabrics, follow the grain line of the fabrics and pull the fabric so that it could fit onto the body. 4. Production technique: Straight stitch would be applied for non-stretch fabrics. Zigzag stitch would be applied for stretch fabrics.
Spawn is the vegetative growth of the mycelium and serves as the inoculum or seed for cultivating mushrooms. Various cereal grains, such as wheat, millet, barley, sorghum, brown rice, rye, and oat were assessed to compare their characteristics and suitability for spawn production of button mushroom (Agaricus bisporus). The mycelial growth rates, density, and the number of completely colonized grains were measured from the twentieth day of inoculation. Wheat grains showed fastest mycelial growth with 8.4 cm followed by rye, oat, barley with 8.2, 7.5 and 7.3 cm, respectively. In the mycelial density, foxtail millet, barley, and sorghum were best compared with that of wheat grains. Especially, the number of grains which were completely colonized by mycelia were greatest in foxtail millet with 5,123 grains followed by proso millet, and wheat with 3,052 and 914, respectively. Based on the results obtained, barley, foxtail millet, and sorghum grains would be appropriate substituting for wheat grain in spawn production of button mushroom.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.