• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1159-1160
• /
• 2006

For pure Molybdenum carburized in mixed gases of argon and carbon monoxide, microstructural observations were carried out. X-ray diffraction analysis for carburized specimens revealed that brittle ${\alpha}-Mo_2C$- layer hardly formed in the case of low carbon monoxide concentration. Fracture strength of the specimen carburized at 1673 K for 16 h is about 550 MPa higher than that of the un-carburized specimen. SEM observation revealed that with increasing carburizing temperature, the region demonstrating a transgranular fracture mode progressed towards the center of specimen. This result means that the grain boundaries were strengthened by the grain boundary diffusion of carbon and the strength of grain boundaries exceeded that of grain itself.

• 한국분말재료학회지
• /
• 제7권3호
• /
• pp.137-142
• /
• 2000

In order to analyze the densification behaviour of stainless steel powder compacts during hot isostatic pressing (HIP) at elevated temperatures, a power-law creep constitutive model based on the plastic deformation theory for porous materials was applied to the densification. Various densification mechanisms including interparticle boundary diffusion, grain boundary diffusion and lattice diffusion mechanisms were incorporated in the constitutive model, as well. The power-law creep model in conjunction with various diffusion models was applied to the HIP process of 316L stainless steel powder compacts under 50 and 100 MPa at $1125^{\circ}C$. The results of the calculations were verified using literature data. It could be found that the contribution of the diffusional mechanisms is not significant under the current process conditions.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.51-56
• /
• 2016

The microstructure and magnetic properties of HDDR-treated powders after grain boundary diffusion process (GBDP) with Nd-Cu alloy at different temperatures have been studied. The variation of GBDP temperature had multifaceted influences on the HDDR-treated powders involving the microstructure, phase composition and magnetic performance. An enhanced coercivity of 16.9 kOe was obtained after GBDP at $700^{\circ}C$, due to the modified grain boundary with fine and continuous Nd-rich phase. However, GBDP at lower or higher temperature resulted in poor magnetic properties because of insufficient microstructural modification. Especially, the residual hydrogen induced phenomenon during GBDP strongly depended on the GBDP temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.34-37
• /
• 2001

In this study, the capacitance-voltage properties of (Sr$_{1-x}$ .Ca$_{x}$)TiO$_3$(0.05$\leq$x$\leq$0.20)-based grain boundary layer ceramics were investigated. The ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were 1480~150$0^{\circ}C$ and 4 hours, respectively. The 2nd phase formed by the thermal diffusion of CuO from the surface leads to very excellent dielectric properties, that is, $\varepsilon$$_{r}$>50000, tan$\delta$<0.05, $\Delta$C<$\pm$10%. The capacitance is almost unchanged below about 20[V] but it decreases slowly about 20[V]. The results of the capacitance-voltage properties indicated that the grain boundary was composed of the continuous insulating layers.ulating layers.s.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.168.1-168
• /
• 2000

• 반도체디스플레이기술학회지
• /
• 제4권1호
• /
• pp.23-27
• /
• 2005

This paper presents a simulation methodology for the poly-silicon oriented TCAD(technology-CAD) system. A computer simulation environment for the poly-silicon processing has been set up with the proper adoption of the two-stream model for ion-doping, diffusion, and defects inside of grain and on the grain boundary. After the simulator calibration, simulation results for the poly-silicon diffusion hat shown a good agreement with the SIMS data.

• 한국결정성장학회지
• /
• 제10권2호
• /
• pp.122-127
• /
• 2000

불규칙 입자형성을 갖는 Ce-TZP와 알루미나가 분산된 Ce-TZP 세라믹스를 세라아 도핑조선과 열처리 조건을 변화시켜 제조한 다음, 미세구조를 관찰하였다. 제조된 시편들은 상대밀도가 99% 이상인 고밀도의 소결체였으며, 정방정 및 입방정상 지르코니아 입자로 구성되었다. 도핑하지 않거나 소결만 시킨 시편의 경우 직선적인 입계와 정상적인 입자형성을 나타낸데 비하여 세리아를 침적법으로 도핑한 후 고온으로 열처리한 시편에서는 확산구동 입계이동이 일어나 입계 및 입자형성이 불규칙하였으며. 이러한 Ce-TZP에서는 입자당 평균 입계같이 정상입자에 비하여 크게 증가하였다. 알루미나를 분산시켜 소결한 {{{{ { Al}_{2 }{ O}_{3 } }}}}/Ce- TZP 시편의 경우, 알루미나 입자에 의해서 입성장이 크게 억제되었고, 세리아를 도핑한 후 소결과 열처리를 행한 {{{{ { Al}_{2 }{ O}_{3 } }}}}/Ce-TZP에서는 불규칙 입자형상이 형성되면서도 입성장이 억제되어 입자크기에 비하여 입계면적이 크게 증가하였다. 분산된 알루미나 입자들은 소결과 열처리 과정 중 입자크기가 증가하였고, 열처리 동안 많은 입자들이 입계에서 입내로 위치가 변화하였다. 정상적인 입자형성을 갖은 시편에서는 균열진전시 입계파괴가 주로 일어났으나 불규칙 입자형성을 갖는 시편에서는 주로 입내파괴가 관찰되었다.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2771-2782
• /
• 2022

When assessing the radiological consequences of postulated accident scenarios, it is of primary interest to determine the amount of radioactive fission gas accumulated in the fuel rod free volume. The state-of-the-art semi-empirical approach (ANS 5.4-2010) is reviewed and compared with a mechanistic approach to evaluate the release of radioactive fission gases. At the intra-granular level, the diffusion-decay equation is handled by a spectral diffusion algorithm. At the inter-granular level, a mechanistic description of the grain boundary is considered: bubble growth and coalescence are treated as interrelated phenomena, resulting in the grain-boundary venting as the onset for the release from the fuel pellets. The outcome is a kinetic description of the release of radioactive fission gases, of interest when assessing normal and off-normal conditions. We implement the model in SCIANTIX and reproduce the release of short-lived fission gases, during the CONTACT 1 experiments. The results show a satisfactory agreement with the measurement and with the state-of-the-art methodology, demonstrating the model soundness. A second work will follow, providing integral fuel rod analysis by coupling the code SCIANTIX with the thermo-mechanical code TRANSURANUS.

• 한국분말재료학회지
• /
• 제29권5호
• /
• pp.357-362
• /
• 2022

The low-temperature sinterability of TiO₂-CuO systems was investigated using a solid solution of SnO₂. Sample powders were prepared through conventional ball milling of mixed raw powders. With the SnO₂ content, the compositions of the samples were Ti_1-xSn_xO₂-CuO(2 wt.%) in the range of x ≤ 0.08. Compared with the samples without SnO₂ addition, the densification was enhanced when the samples were sintered at 900℃. The dominant mass transport mechanism seemed to be grain-boundary diffusion during heat treatment at 900℃, where active grain-boundary diffusion was responsible for the improved densification. The rapid grain growth featured by activated sintering was also obstructed with the addition of SnO₂. This suggested that both CuO as an activator and SnO₂ dopant synergistically reduced the sintering temperature of TiO₂.

• Journal of Welding and Joining
• /
• 제13권3호
• /
• pp.147-156
• /
• 1995

The change of microstructure in the bonded interlayer and tensile properties of joints were studied for liquid phase diffusion bonding using STS-310 and Incoloy-825 as base metal and base metal+B alloy as insert inetal. Main experimental results obtained in this study are as follows. 1) The optimum amount of B addition into the insert metal was found to be about 4mass%. 2) When isothermal solidification was completed, the microstructure in the bonded interlayer was the same with that of the base metal because of the grain boundary migration in the bonded interlayer. 3) All of the tensile specimen fractured at base metal and joints bonded at optimum condition exhibited tensile properties in excess of base metal requirements. 4) It was determined that fine car-borides and bordes such as M$_{23}$(C,B)$_{6}$, Cr$_{2}$B, and CrB in STS-310S and TiB in Incoloy-825 exist at the grain boundary around bonded interlayer. These precipitates almost disappeared after homogenizing treatment at 1373K for 86.4ks.s.