This study presents a simple method to control the seed orientation which leads to the various growth characteristics of a single grain REBCO (RE: rare-earth elements) bulk superconductors. Seed orientation was varied systematically from c-axis to a-axis with every 30 degree rotation around b-axis. Orientations of a REBCO single grain was successfully controlled by placing the seed with various angles on the prismatic indent prepared on the surface of REBCO powder compacts. Growth pattern was changed from cubic to rectangular when the seed orientation normal to compact surface was varied from c-axis to a-axis. Macroscopic shape change has been explained by the variation of the wetting angle of un-reacted melt depending on the interface energy between $YBa_2Cu_3O_{7-y}$ (Y123) grain and melt. Higher magnetic levitation force was obtained for the specimen prepared using tilted seed with an angle of 30 degree rotation around b-axis.
Green compressive strength, permeability, deformation, flowability, compactability and green hardness values at room temperature are dependable on the grain distribution and grain shape. The results obtained under constant moisture (4% for sand) and bentonite (8% for sand) were as follows; 1. With decreasing grain size, surface area of sand grain was increased. 2. With decreasing grain size, coefficient of angularity was increased. 3. As surface area increased from $8926.43cm^2$ to $21211.16cm^2$ , green compressive strength was increased from $210.93\;g/cm^2$ to $449.98\;g/cm^2$, hardness was increased from 76.7 to 82.3, but permeability was decreased from $411.7\;{\frac{\;cc\;{\cdot}\;cm\;}{atm\;{\cdot}\;cm^2\;{\cdot}\;min.}}$ to $113.7\;{\frac{\;cc\;{\cdot}\;mm\;}{atm\;{\cdot}\;cm^2\;{\cdot}\;min.}}$ 4. As surface area increased from $8926.43\;cm^2$ to $21211.16\;cm^2$, flowability was decreased from 82.3% to 80.8%, deformation was decreased from $67.1\;cm\;{\times}\;10^{-3}$ to $54.6\;cm\;{\times}\;10^{-3}$, but compactability was increased from 44.8% to 54.3%. 5. Room temperature properties of molding sand were affected by variation of surface area.
고품위석회석의 품질 개념에서 특히 중요한 결정도 및 조직 관계는 계측상의 어려움 때문에 석회석 평가에서 그 동안 효과적으로 잘 적용될 수 없었다. 이를 극복하기 위해서 이 연구에서는 석회석 원광의 품질을 평가하는 방식으로서 영상분석시스템 하에서 결정의 형상계수 및 경계 빈도수의 측정법을 처음으로 적용하였다. 이 같은 석회석 원광 품질 평가방식을 국내산 소성용 석회석에 적용하여 광석별로 비교 검토하였다. 그 결과, 원광의 방해석 함량, 즉 품위와 그 결정 입도가 비슷하더라도 결정 형상계수와 경계빈도수에 의해서 생석회의 품질은 현격한 차이를 보인다. 즉, 원광의 결정 형상이 불규칙하고 경계 빈도수가 높을수록 이로부터 합성된 생석회는 소성율, 공극률, 반응성, 소결 정도 및 분화율과 같은 모든 품질 부문에서 우수한 특성을 보였다. 그렇지만 결정 형상계수와 경계빈도수가 상대적으로 너무 클 경우에는 쉽게 과소성되기 때문에 고품질의 생석회를 제조하는 데에는 가열처리 시간을 최소화하는 공정상의 기술이 요구된다. 석회석 산업에서 이같은 품질 평가 방식은 결정 입도는 물론 수치화할 수 없었던 결정 형상 및 조직적 사항들이 모두 고려되어 기존의 평균 입도 등에 의거한 평가보다 훨씬 합리적인 것으로 사료된다.
An emphasis has been placed on the importance of selecting a sand for furan sand process, which ie affected by the properties of sand. Investigations have been carried out to use the domestic artificial sands for the furan sand process. For laboratory investigations, the sands have been prepared and tested for chemical analysis, loss on ignition, sieve analysis, AFS grain fineness number, grain shape, PH value, acid demand, surface shape, theoretical surface area, moisture absorption, crushing durability and compressive strength and S. S. I. of molding sands. Most commercial sands have been found to be able to be used. The main requirement of the sands has been shown to be that 3 or 4 screen sands, AFS no.40-70 (or 100), of low acid demand, good surface area and good grain shape require less resin and catalyst to give an adequate strength.
한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
/
pp.891-892
/
2006
To test the correlation between grain shape and growth behavior we prepared WC-TiC-Co samples with rounded (Ti, W)C grains and faceted WC grains. The growth of rounded (Ti, W)C grains was normal. In contrast, the growth of faceted WC grains was abnormal or suppressed depending on the initial size of WC particles. These observations were explained using growth theories of crystals in a liquid and were also confirmed by a simulation using their growth equations. The present results thus demonstrate that the growth behavior of carbide grains in a liquid is governed only by their shape, irrespective of the presence of another phase.
Ji-Hun Kim;Jae-Ryoung Park;Yoon-Hee Jang;Eun-Gyeong Kim;Kyung-Min Kim
한국작물학회:학술대회논문집
/
한국작물학회 2022년도 추계학술대회
/
pp.279-279
/
2022
Rice is 34% of the world's population used as a staple food. But the world population is increasing. Food security is not well protected. Improving cultivar development can address food security. Quantitative trait locus (QTL) mapping is a statistical analysis using both phenotypic and genotypic dates. The purpose of QTL mapping is to determine a gene. Increasing grain size is a way to increase yield in rice. Grain size-related genes were mapped using CNDH population obtained by cross-breeding Cheongcheong (Indica) and Nagdong (Japonica) through anther culture. Grain harvested from experimental field of Kyungpook National University in Gunwi in 2021. Genes related to grain length were detected between RM5964-RM12285, RM20924-RM20967 in chromosome 1, 7. LOD score is 5.88 and 5.6. Genes related to grain width was detected between RM289-RM18130 in chromosome 5. LOD score is 4.57. Genes related to grain length/width ratio were detected between RM5459-RM3482, RM5699-RM1211 and RM3838-RM3381 in chromosome 1, 2, 5. LOD score is 3.75, 3.14 and 3.41. 4 genes was detected in chromosome 1 and 2 genes was detected in chromosome 2 and 7 genes was detected in chromosome 5. 2 genes related to grain shape and quality were detected. 4 genes related to grain length were detected. 4 genes related to grain size were detected. 1 gene related to grain size and weight was detected. 2 genes related to grain length and weight were detected. By finding the gene related to grain size, it provides food to people threatened by food security and solves the food shortage.
국내 육성 벼 품종의 입형 특성은 협소한 유전적 배경을 가지고 있는 것으로 알려져 있다. 본 연구는 육성품종의 입형 관련 표현형과 유전자형을 분석하여 생태형에 따른 입형 특성과 대립유전자 효과를 파악하고, 자포니카 품종에 도입된 대립유전자의 기원을 확인하고자 수행되었다. 자포니카 225, 흑미 14, 통일형 생태형 33품종 등 272품종에 대해서 현미 길이, 너비, 두께, 장폭비, 천립중의 표현형과 GW2, GS3, qGL3, qSW5, GS5, TGW6, GW7, GW8 등 8개 입형 관련 유전자형을 분석하였다. 자포니카 품종은 중단립종에 단원형, 흑미와 통일형 품종은 중립종에 중원형 입형 특성을 나타냈다. 표현형에 대한 군집분석을 통해 자포니카 품종 대부분으로 구성된 그룹 1, 흑미와 통일형 품종 위주로 구성된 그룹 2, 자포니카 품종이 포함된 그룹 3 등 세 그룹으로 나눌 수 있었다. 그룹 1은 현미 너비와 두께, 그룹 2는 장폭비와 길이, 그룹 3은 천립중에 의해 영향을 많이 받아 구분되며 그룹 1은 중단립종·단원형, 그룹 2는 중립종·중원형, 그룹 3은 장립종·단원형 입형 특성을 나타냈다. 입형 관련 대립유전자형 분석 결과 gw2 (빈도수 1.1%)와 tgw6 (0.4%) 대립유전자는 매우 드물었으며, qgl3와 gw8는 통일형 생태형에서만 존재하였고 자포니카 품종의 qSW5 유전자형은 qsw5_N이 대부분을 차지하였다. 생태형별 대립유전자 조합의 수는 자포니카 7개(Cj1-Cj7), 흑미 3개(Cj_b1-Cj_b3), 통일형 13개(CT1-CT13)로 자포니카에 비해 품종수가 적은 통일형 생태형이 더 다양하였다. 자포니카 품종의 대표 대립유전자 조합은 자포니카 Cj1, 2 (GW2-GS3_C-qGL3-qsw5_N-gs5-TGW6-gw7(GW7)-GW8)로 여기에 gw2, gs3, qSW5, GS5 대립유전자가 도입됨으로써 다양성이 확대되었다. 흑미 품종의 대표 대립유전자 조합은 Cj_b2, 3 (GW2-gs3-qGL3-qsw5_N-gs5-TGW6-gw7(GW7)-GW8)로 자포니카 대표 조합에서 GS3_C가 gs3로 치환된 조합이다. 통일형 생태형은 GW2 유전자만 다형성이 없었고 7개 유전자에서 13개 대립유전자 조합이 확인되었으며 대표조합은 CT3 (GW2-GS3_C-qgl3-qsw5_N-gs5-TGW6-GW7-gw8)이다. 우리나라 대표 품종인 '신동진'의 입형 특성은 자포니카 대립유전자 조합 Cj2에서 gs3가 도입됨으로써 중대립화되었고, gs3는 미국품종 Calrose로부터 유래한 것으로 판단된다. 국내 육성 벼 품종에 대한 입형 관련 표현형과 유전자형 분석 결과는 우리나라 벼 품종의 입형 특성을 다양화하는데 기여할 것으로 기대된다.
In this paper, process conditions are investigated for elimination of the grain coarsening and improved material flow during forging process by both of experiments and FEM analysis. Particular interest has been given to understand role of preform shape on the grain coarsening behavior and magnitude of the hammer forging load. As the results of FEM simulation by using DEFORM-3D, the simulated forging loads were 2,200ton in the case of a machined bar which is machined from 65mm to 60mm diameter, and below 1,900ton in the case of machined preform, respectively. The use of preform has been beneficial for reduction of the forging load and elimination of the grain coarsening. However, in the case of as received bar and the round bar, which was machined to 2.5mm thickness in surface layer, some degree of local grain coarsening behavior has been observed. The optimized preform shape could be properly designed by applying the FEM simulation.
When a SnO$_2$ thin film was deposited by thermal CVD, two different types of growth behavior that were dependent on the deposition temperature were observed. The film grown at 475$^{\circ}C$ had a wide grain size distribution and a faceted surface shape. On the other hand, the film grown at 5$25^{\circ}C$ had a relatively narrow grain size distribution and a rounded sulfate shape. The aspects of grain shape and growth behavior agree well with the theory of gram growth and a roughening transition. The charge tarrier density decreased with deposition time. According to photoluminescence measurements, the peak intensity of the spectra occurred at approximately 2.5 eV, which is related to oxygen vacancies, and decreased with increasing of deposition time. These measurement results suggest that the number of oxygen vacancies, which is related to the electrical conductivity, decrease with deposition time.
Fatigue strength, electrical conductivity and stress-corrosion-cracking resistance are considered as important factors at aircraft Al alloys, therefore Al7050 alloy has been developed to improve such properties. However, hammer-forged Al7050 parts showed the undesirable structures such as severe local grain coarsening and inhomogeneous material flow, resulted in the degraded mechanical properties. In this paper, process conditions are investigated for elimination of the grain coarsening and improved material flow during forging process by both of experiments and FEM analysis. Particular interest has been given to understand role of preform shape on the grain coarsening behavior and magnitude of the hammer forging load The use of preform has been beneficial for reduction of the forging load and elimination of the grain coarsening. However, in the cases of as received bar and the round bar, which was machined to 2.5mm thickness in surface layer, some degree of local grain coarsening behavior has been observed. The optimized preform shape could be properly designed by applying the FEM simulation.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.