• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.380-385
• /
• 2014

Spherical atomizing reduction steel slag was prepared by atomizing technology using reduction steel slag (ladle furnace slag, LFS) generated from steel industry. In order to develop the mass-recycling technology of atomizing reduction steel slag, polymer concrete composite was prepared using spherical atomizing reduction steel slag instead of fine aggregate (river sand) and coarse aggregate (crushed aggregate), depending on the grain size. Different polymer concrete specimens were prepared with the various proportions of polymer binder and replacement ratios of atomizing reduction steel slag in order to investigate the characteristics of polymer concrete composite. Results showed that compressive strengths of polymer concrete specimens decreased with the increase of replacement ratios of atomizing reduction steel slag, but flexural strengths of the specimens showed a maximum strength at the 50% of replacement ratios of atomizing reduction steel slag. It was concluded that addition ratio of polymer binder, which affect greatly on the prime cost of production of polymer concrete, could be reduced by maximum 18.2 vol% because the workability of the polymer concrete was remarkably improved by using the atomizing reduction steel slag. However, further study is required because the mechanical strength of the specimen using atomizing reduction steel slag was greatly reduced in hot water resistance test.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.3
• /
• pp.446-455
• /
• 2020

Objective: Our recent series of laboratory- and large-scale experiments confirmed that under aerobic and anaerobic conditions, sodium metabisulfite (SMB) was effective in preserving nutrients and antioxidant capacity of highly perishable fruit and vegetable discards (FVD). Hence, the purpose of this study was to examine how partial inclusion of SMB-treated FVD in total mixed ration (TMR) influences in vitro ruminal fermentation, whole-tract digestibility, nitrogen metabolism, blood metabolites, and voluntary feed intake of sheep. Methods: The FVD were mixed thoroughly with 6 g SMB/kg wet biomass and kept outdoors under aerobic conditions for 7 days. Four TMRs including four levels of SMB-treated FVD (as-fed basis) at 0%, 10%, 20%, and 30% (equaling to 0%, 1.9%, 3.8%, and 5.7% on dry matter basis, respectively), were prepared as replacement for corn grain. The ruminal fermentation metabolites were studied using an in vitro gas production test. Four mature male Corriedale sheep were assigned at random to the 4 diets for two separate sub-experiments; i) digestibility trial with four 21-d periods, and ii) voluntary feed intake trial with four 28-d periods. Results: Inclusion of SMB-treated FVD in the TMR tended to quadratically increase partitioning factor. No effect was seen on total-tract digestibility of organic matter, ether extract, crude protein, and acid detergent fiber, except for neutral detergent fiber digestibility that tended to linearly increase with increasing SMB-treated FVD in the TMR. The progressive increase of FVD preserved with SMB in the diet had no effect on nitrogen metabolism. Treatment had no effect on serum antioxidant capacity and blood metabolites assayed. Voluntary feed intake was not impaired by inclusion of SMB-treated FVD in the TMR. Conclusion: It appears that FVD preserved with SMB can be safely incorporated into TMR as replacement of corn grain without impairment of nutrient metabolism and feed intake.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.3
• /
• pp.395-402
• /
• 2020

In recent years, the home meal replacement (HMR) market has expanded and the consumption of ready-to-heat (RTH) rice has significantly increased. In this study, RTH rice products containing seaweed were prepared with different types of grain: white rice, a mixture of white rice and barley, barley, and mixed grains. The control was a commercial RTH white rice without seaweed. The proximate components, total dietary fiber, in vitro starch digestibility, and antioxidant activity were compared. The ash content of the RTH seaweed rice was higher than that of the control (P<0.05). The total dietary fiber of the RTH seaweed rice was in the range of 1.03-6.57%, which directly impacted the in vitro starch digestibility. The in vitro antioxidant activity including total phenolic content, reducing power, DPPH (2,2-diphenyl-1-picryl-hydrazyl) and ABTS⁺ (2,2'-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid) radical scavenging activity of the seaweed rice with barley and the white rice/barley mixture was greater than that of the other rice products (P<0.05). These results indicate that the in vitro digestibility and antioxidant activity of the HMR RTH seaweed rice were greater than those of the control. In addition, when the RTH seaweed rice was prepared with barley, the functional activity improved.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.131-145
• /
• 2009

Goryeong Yangjeondong Petroglyph on the joint face of the bedrock (6m in width, 3m in height) composed of the green sandstone has circles and shield pattern sculptures. The rock is mainly composed of quartz, feldspar, chlorite, illite and calcite with the clay minerals. These clay minerals occur as pore lining, replacement of component and pore fillings. Investigated the weathering aspects including the connection between soluble salt and rock weathering and the stability of the bedrock with petroglyphs. The Major deterioration aspect are grain peel-off, surface exfoliation, cracks and damage. And the bedrock where the joints and cracks advance is interpreted with the fact that has the possibility of the falling rock. For conservation, adhesive need to cover crack and damage and consolidation is necessary in the surface which becomes weak.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.717-726
• /
• 2020

The physical characteristics of the major varieties of perilla were analyzed to use as basic data for the design of a high-quality, high-efficiency perilla cleaner and stone separator. Because the size, thousand-grain weight, angle of repose, angle of friction, bulk density and terminal velocity of perilla have significant differences according to the perilla variety, the different of characteristics by variety should be considered for performance improvement of a perilla cleaner and stone separator. Therefore the cleaner and stone separator using a sieve could be improved by the application of a detachable sieve or by using equipment such as a 2 - 3 stage sieve and regulating the slope. Moreover, because differences in the terminal velocity occur due to the differences in the size and thousand-grain weight according to the perilla variety, a blower with an adjustable fan speed was considered for the design of the improved cleaner. Additionally, it was shown that the length of perilla has the greatest correlation based on a comparison of the coefficients of the other characteristics. Accordingly, the length of perilla could be used as a major factor for the fine adjustment and parts replacement of the device. These results can be used as basic data for a high-quality, high-efficiency perilla cleaner and stone separator. In the future, the development of the machine and follow-up studies based on the basic data are needed to determine the optimized operating conditions and mechanism of action.

• Korean Journal of Materials Research
• /
• v.34 no.1
• /
• pp.44-54
• /
• 2024

High-Manganese (Mn) austenitic steel, with over 24 wt% Mn content, offers outstanding mechanical properties in cryogenic settings, making it a potential replacement for existing cryogenic materials. This high manganese steel exhibits high strength, ductility, and wear resistance, making it promising for applications like LNG tanks, flanges, and valves. To operate in cryogenic environments, hot forging and heat treatment processes are vital, especially in flange production. The cooling rate during high-temperature cooling after hot forging plays a critical role in influencing the microstructure and mechanical properties of high manganese steel. The rate at which cooling occurs during this process influences the size of the grains and the distribution of manganese and consequently has an impact on mechanical properties. This study assessed the microstructure and mechanical properties based on different cooling rates during the hot forging of High-Mn steel flanges. Comparing air and water cooling after hot forging, followed by heat treatment, revealed notable differences in grain size. These differences directly impacted mechanical properties such as tensile strength, hardness, and Charpy impact property. Understanding these effects is crucial for optimizing the performance and reliability of High-Mn steel in cryogenic applications.

• Korean Journal of Agricultural Science
• /
• v.35 no.1
• /
• pp.101-118
• /
• 2008

This paper reviews the present situation of Triticale cultivation and examines the potentiality of contribution to livestock as well as poultry sector in Bangladesh Agriculture. Triticale is a human-made cross between rye and durum wheat that has the ability to produce quality green fodder, and then re-grow after first and second cutting to produce grain. In Bangladesh, it is a non-traditional cereal that grows well during the cool and dry Rabi season (November-March) when fodder and feed scarcity is a major limiting factor for ruminant livestock. In Bangladesh Triticale was started to grow in the late Ninety's. The scientists of Bangladesh Agricultural Research Institute (BARI) were first introduced triticale in Bangladesh. Still now the situation of Triticale is grown as fooder and feed in Bangladesh within the scientists under trial. High quality grass fodder was obtained by cutting green triticale plants twice, at 35 and 50 days after seeding, while later the ratooning tillers produced grain to a yield of 1.1-2.4 t/ha of grain for poultry feed or human food. Triticale straw was twice as nutritious as rice or wheat straw and its grain contained more protein than other cereals. Researchers and farmers have also successfully made triticale hay and silage from a mixture of triticale green cuttings, rice straw and molasses. A feeding trial at Bangladesh Livestock Research Institute(BLRI), Savar station showed a large(46%) increase in cow live weight gain and a 36% increase in milk yield (but no change in milk quality or dry matter intake) in cows fed triticale silage compared with those fed rice straw over a period of nine weeks. In another feeding trial, it was found that triticale grain was a good replacement for wheat in the feed blend for chickens in Bangladesh. So it will be a good chance to alive our livestock as well as poultry sector if triticale enters to our existing cropping system as fodder cum grain. The challenge in Bangladesh is to identify fodder technologies that match existing small-scale farmer cropping patterns without needing major inputs or increasing risks. Preliminary field experiments revealed that triticale is a crop with good potential to produce quality fodder and grain for small scale farmers in Bangladesh.

• Economic and Environmental Geology
• /
• v.13 no.4
• /
• pp.205-213
• /
• 1980

Stannite is mainly found in hypothermal ore deposits, whereas mawsonite and stannoidite occur characteristically with bornite and chalcopyrite in subvolcanic (xenothermal) ore deposits. Mawsonite always shows the replacement on the rims of stannoidite grains or along the grain boundaries of stannoidite, bornite and chalcopyrite. In the Tada mine, Japan, the following mineral assemblages of the Cu-Fe-Sn-S minerals were observed. 1) bornite-stannoidite; 2) stannoidite-chalcopyrite; 3) stannite-chalcopyrite; 4) bornite-mawsonite-stannoidite; 5) bornite-stannoidite-chalcopyrite; 6) mawsonite-stannoidite-chalcopyrite; 7) stannoidite-stannite-chalcopyrite; 8) bornite-mawsonite-stannoidite-chalcopyrite The heating and D.T.A. experimental results indicate that natural stannoidite containing 3 weight percent of zinc decomposes to bornite, stannite and chalcopyrite at above $500^{\circ}C$, whereas zinc-free synthetic stannoidite is stable up to $800^{\circ}C$. The stability temperature of zincian stannoidite depends on the zinc content. Mawsonite is stable at temperatures below $390^{\circ}C$ and decomposed to stannoidite, bornite and chalcopyrite above it. According to the sulfur fugacity determination by the electrum tarnish method the univariant assemblage of mawsonite, bornite, stannoidite and chalcopyrite requires a higher sulfur fugacity than that of bornite, stannoidite and chalcopyrite assemblage.

• Journal of the Korean Ceramic Society
• /
• v.34 no.6
• /
• pp.591-600
• /
• 1997

Al2O3/Al composites were produced by displacement reaction method, which was carried out by immersing the sintered silica preform, which was prepared from fused silica powder, in molten aluminum. Because the molten aluminum did not penetrate into the silica preform with higher than 20% of porosity when the displacement reaction was accomplished at 100$0^{\circ}C$ for 10 hours in air atmosphere, the optimum range of sintering temperature of silica preform was from 135$0^{\circ}C$ to 140$0^{\circ}C$. The microstructure of this Al2O3/Al composites showed three-dimentionally co-continuous alumina, which provides wear resistance and high stiffness, and aluminium which acts as a toughnening phase. The grain size of the alumina in composites did not change with the particle size of the silica preform. The exact shape of the preform was retained and a net-shaped composite was produced. The representative Al2O3/Al composite prepared in this study showed 3.30mg/㎤ of bulk density, 350-430 MPa of flexural strength, 7.0 MPa.m1/2 of fracture toughness, and good machinability.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.4
• /
• pp.196-204
• /
• 2000

We present characteristics of hydrothermal chlorite and its interstratification with 7-$\AA$ mineral phase that occur in the propylitic alteration zone of the Bobae sericite deposit formed in rhyodacitic tuff. Chlorite is found as disseminated fine-grained aggregate or replacement materials of precursor minerals such as Fe-oxides and amphibole. Based on X-ray diffraction(XRD), all chlorites belong to IIb polytype and the (060) reflections averaging $1.53~1.54\AA$ indicate a trioctahedral structure. Chemical compositions of chlorite show that the Fe/(Fe+Mg) values are mostly in the range of 0.44~0.53, and cation deficiencies in octahedral sites range from 0.06 to 0.37. Under scanning electron microscope(SEM) chlorite occurs as well-crystallized aggregates and is subparallely stacked in interstices or between grain boundaries of associated minerals. transmission electron microscopic(TEM) images reveal that chlorite shows regular layers with $14-\AA$ spacings, locally interstratified with $7-\AA$ or $21-\AA$ periodicities. The $21- \AA$ periodicity corresponds to the sum of the $d_{001}$ values of chlorite and $7-\AA$ phase. The chlorite packet coexisting with 7-$\AA$ layers displays abundant defects such as edge dislocations and layer terminations. Selected-area electron diffraction(SAED) indicates that chlorite and $7-\AA$ phase are randomly interstratified in the mixed-layer areas. We propose a lateral change of layers for the polymorphic transition of $7-\AA$ phase to chlorite.e.