• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.77-81
• /
• 2017

Pulse electroplating of Ni-P alloy was studied to fulfill the material requirement to the advanced vertical probe tip in wafer probe card. The major concerns are for the electrical conductivity and yield strength. Plating parameters such as current density, duty cycle and solution components were examined to obtain the nanocrystal structure and proper percentage of phosphorus, leading to how to control the nanocrystal grain growth and precipitation of $Ni_3P$ after heat treatment. Among the parameters, the amount of phosphorus acid was the main factor affecting on the grain size and sheet resistance, and the amount of 0.1 gram was appropriate. Since hardness in Ni-P alloy is increased by as-plated nanocrystal structure plus precipitation of $Ni_3P$, the concentration of P less than 15 at% was better choice for the grain coarsening without minus in hardness value. The following heat treatment made grain growth and dispersion of precipitates adjustable to meet the target limit of resistance of $100m{\Omega}$ and hardness number of over 1000Hv. The Ni-P alloy will be a candidate for the substitute of the conventional probe tip material.

• Ocean Science Journal
• /
• v.42 no.2
• /
• pp.69-79
• /
• 2007

A vertical transect with 4 km length was established for the macrofaunal survey on the Chokchon macrotidal flat in Kyeonggi Bay, Incheon, Korea, 1994. Tidal elevation (m) and sediment mean grain size $(\phi)$ were inversely predicted by the transfer functions from the faunal assemblages. Three methods: weighted average using optimum value (WA), tolerance weighted version of the weighted average (WAT) and maximum likelihood calibration (MLC) were employed. Estimates of tidal elevation and mean grain size obtained by using the three different methods showed positively corresponding trends with the observations. The estimates of MLC were found to have the minimum value of sum of squares due to errors (SSE). When applied to the previous data $(1990\sim1992)$, each of three inference models exhibited high predictive power. This result implied there are visible relationships between species composition and faunas' critical environmental factors. Although a potential significance of the two major abiotic factors was re-affirmed, a weak tendency of biological interaction was detected from faunal distribution patterns across the flat. In comparison to the spatial and temporal patterns of the estimates, it was suggested that sediment characteristics were the primary factors regulating the distribution of macrofaunal assemblages, rather than tidal elevation, and the species composition may be sensitively determined by minute changes in substratum properties on a tidal flat.

• Journal of the Korean Ceramic Society
• /
• v.35 no.8
• /
• pp.783-790
• /
• 1998

The characterization of the complexation reaction of PVA and Al(III) ion at different pH and the sint-ering behaviour of UO2 containing the PVA-Al(III) complexes were investigated. Compared with pure PVA powder the complexed PVA-Al(III) powder had compacter shape and lower decomposition temperature The major phase of PVA-Al(III) complex decomposed at 90$0^{\circ}C$ was $\alpha$-Al2O3 The PVA-Al(III) complex formed at pH 9 had the lowest relative viscosity the highest Al content of 36% and the smallest particle size of 19${\mu}{\textrm}{m}$ While the pure UO2 pellet appeared with bimodal one. The grain size of the pure UO2 pellet was 7${\mu}{\textrm}{m}$ but that of the PVA-Al(III) complex added UO2 pellet was increased up to 36${\mu}{\textrm}{m}$ The largest grain size was ob-tained when the PVA-Al(III) complex formed at pH9 was added and the PVA-Al(III) complex formed at pH 11 had the greatest effect on increasing pore size.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.73-76
• /
• 2006

This study was carried out to investigate the change yield and grain quality in rice caused by damages of brown planthopper (Bph) on major agronomic traits at the ripening stage. A major agronomic traits such as culm length, panicle length, number of panicle and number of grain per panicles was no-significant difference compared hopperburn area (HBA) and moderately damaged area (MDA) by brown planthopper with non-damaged area (NDA). but, the ripeing ratio and yield in HBA and MDA was significantly decreased. The perfect rice of brown rice in HBA and MDA was also lowered than the NDA and the immatured grain among imperfect rice in damaged area by BPH was significantly increased than in the NDA. Among the traits related with palatability of cooked rice, the amylose content was not affected by damage of brown planthopper, whereas, the protein content was significantly increased in the HBA and MDA. additionally, Peak viscosity in HBA and MDA is lower than the NDA, and setback was increased. In most cases, there was negative on yield and grain quality by the damage of brown planthopper at the ripening stage. Thus, the rice product harvested in damaged area should be separated with that in non damaged area for grain market quality of milled rice.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.96-96
• /
• 2017

Rice is a staple food for nearly half of the world's population, with more than 10,000 rice varieties providing almost one-quarter of the global per capita dietary energy supply. Grain size, panicle size and branch number, grain number in a panicle are directly associated with rice productivity. Recently several genes which increase grain yield were identified through map-based cloning. Gn1a, Cytokinin oxidase, is a major grain number QTL and regulates grain number per panicle. Dep1 increases panicle branching and reduced rachis length. SCM2 (APO1) was identified by a QTL for culm strength and increased spikelet number. OsSPL16 (GW8) controls grain size and shape and then increases 1000-weight of seed. In here, to identify genotype of genes related to yield in 400 of rice germplasms possessed in National Institute of Crop Science, we had first chosen 4 of well-known genes related to yield; Gn1a, Dep1, SCM2, and OsSPL16. Among these germplasms, 195, 382, 165, and 353 of germplasms harbored the dominant type of Gn1a, Dep1, SCM2, and OsSPL16, respectively. We grouped these germplasms into a total of 10 groups using genotypes of Gn1a, Dep1, SCM2 and OsSPL16. Most rice germplasms belong to group 1, harbored Gn1a, dep1, gw8 and APO1, and group 10, harbored gn1a, Dep1, GW8 and apo1. Hanareum2 is the highest productive cultivar in Korea but do not have dominant type OsSPL16, so belong to group 1. On the other hand, in the case of Unkwang, belongs to group 10, which has dominant type of OsSPL16 but do not have the remaining genes. We can grasp the differences in rice germplasms through the Profiling of genes related to these grain yield, which will be useful for cross-breeding to integrate grain yield genes. We are continuously observing the genotype and phenotype of rice that possesses grain yield genes.

• Journal of Biosystems Engineering
• /
• v.8 no.2
• /
• pp.18-25
• /
• 1983

The binders introduced in Korea were originally designed to be used for Japonica varieties which have realtively long stem and are highly resistant to shattering. In order to use it for Tongil varieties which are short and easy to be shattered, mechanical modifications are necessary to reduce a grain loss incurred during its operation. This study was intended to investigate the binding unit, one of the major factors affecting grain losses. The binding parts of three binders used in Korea were analyzed and the grain loss was experimentally assessed for these binders. The results obtained from this study are summarized as follows: 1. From the motion analysis of discharge mechanism, the trajectory of the discharge arm appeared to be either circular or skewed elliptic. The velocity of a circular path mechanism was constant and smaller than that of a skewed elliptic path mechanism. The discharge grain loss of the former was about twice less than that of the latter. 2. It was found that the grain loss incurred due to the collision of the paddy bundles and ground was considerably high for Tongil varieties. The auxiliary discharge bar gave a significant influence on the motion and posture of the bundles, and the degree of impact on ground. 3. The installation of an auxiliary bar, which guides the paddy bundles smoothly to ground in order to reduce impact when the bundles fall down on ground, appeared to be very effective since the grain losses could be decreased by about 1.6 percentage point. However, the guide bar should be installed after some mechanical modification to reduce the velocity of discharge arm has been made.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2001.10a
• /
• pp.192-206
• /
• 2001

A major challenge in the transition from conventional to organic production in a grain intensive region such as the Com Belt legion of the U.S.A. is how to profitably select and manage a crop relation. The opportunity cast of forgoing grain production for forage and green manure crops is significant. Many organic researchers and writers emphasize the need to bring an animal enterprise into the farming system for diversification and enhanced labor utilization. Livestock also add value to grain and forage crops to offset decreased grain production and can recapture nutrients used in crop production that can be recycled through manure. In grain intensive regions, organic farmers should consider swine production as a natural fit for the farming system. Swine are very efficient and adaptable animals that can add value to both grain and forage crops. While somewhat lacking, there is a reasonable body of literature on organic and sustainable swine production. However, there is relatively little specific information available to organic farmers to assist in the initial decision to enter organic swine production and to evaluate marketing alternatives. The primary focus of this paper is to give some background on organic animal production(emphasis on swine) in the Central United States and outline production and marketing decisions and considerations, relative to market trends, demographics and standards(U.S.). At the farm level, decisions must be made regarding resources, such as land, labor, financial and social capital, all relative to opportunities, all in the context of the standards and market forces beyond the farm. At the personal level the farmer must also make decisions about convictions regarding organic or environmentally friendly agriculture, willingness to change, impacts on lifestyle and family, and the transition to organic methods within the planning horizon of the farmer and the family business.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.2
• /
• pp.188-194
• /
• 2002

To study the effect of wheat bran and lactic acid producing bacteria (LAB) on the performance of calves, 20 crossbred male cattle calves (day old), distributed into two groups were fed on calf starters containing 50 or 0% maize grain, along with green berseem ad libitum and milk as per body weight. Each group was further divided into two sub groups and one subgroup of each group was supplemented with mixed culture of LAB (Lactobacillus acidophilus L. casei, L. Jugarti). Milk feeding was discontinued after 8 weeks of age. The addition of culture increased (p<0.05) DM intake in calves receiving grainless diet from eighth week to the thirteenth one. There was about 21% higher body weight gain and 14% lower feed : gain ratio in culture supplemented calves. DM digestibility was significantly lower (p<0.05) in calves getting grain without culture. The crude protein NDF and ADF digestibility was higher (p<0.05) in grainless than the grain fed group. No major change on rumen fermentation pattern among different treatments was found. The concentration of total volatile fatty acids (TVFA) and protozoa count was higher (p<0.05) in grain fed group. However, lactic acid concentration was higher and rumen pH was lower due to culture feeding. The incidence as well as severity of diarrhoea was reduced in culture supplemented group. The results indicate that crossbred calves can be reared successfully on grainless diet and berseen fodder. The performance of calves was also improved by LAB supplementation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.86-94
• /
• 1999

A set of rice recombinant inbred lines was developed from a cross between a Tongil type variety, Nonganbyeo, and an indica variety, BG276, by the single seed descent method. The number of the lines in the population was 272. All the agronomic characters studied except ADV (alkali-digestion value) showed continuous variation among the RILs, implying that their inheritance mode should be quantitative. The patterns of the variation in the RILs were either normal or skewed distribution. ADVs of RILs were segregated into two groups with 1:1 ratio, indicating that ADVs in this KIL population might be controlled by one major gene. Transgressive variations were also observed in all characters. Heritability values of the characters varied from 0.488 in brown/rough rice ratio to 0.895 in alkali-digestion value. In the analysis of genotypic and phenotypic correlations, the character of yield was positively correlated with 8 different agronomic characters. The number of panicles per hill was negatively correlated with culm length, panicle length, and number of spikelets per panicle. Grain length was positively correlated with grain width, grain thickness, grain length/width ratio, white belly, ADV, and amylose. However, grain length/width ratio was negatively correlated with grain width. White core was also negatively correlated with white belly and ADV.

• Korean Journal of Materials Research
• /
• v.16 no.4
• /
• pp.257-263
• /
• 2006

We have investigated the effect of silver added to Cu films on the microstructure evolution, resistivity, surface morphology, stress relaxation temperature, and adhesion properties of Cu(Ag) alloy thin films deposited on Mo glue layer upon annealing. In addition, pure Cu films deposited on Mo has been annealed and compared. The results show that the silver in Cu(Ag) thin films control the grain growth through the coarsening of its precipitates upon annealing at $300^{\circ}C{\sim}600^{\circ}C$ and the grain growth of Cu reveals the activation energy of 0.22 eV, approximately one third of activation energy for diffusion of Ag dopant along the grain boundaries in Cu matrix (0.75 eV). This indicates that the grain growth can be controlled by Ag diffusion along the grain boundaries. In addition, the grain growth can be a major contributor to the decreased resistivity of Cu(Ag) alloy thin films at the temperature of $300^{\circ}C{\sim}500^{\circ}C$, and decreases the resistivity of Cu(Ag) thin films to $1.96{\mu}{\Omega}-cm$ after annealing at $600^{\circ}C$. Furthermore, the addition of Ag increases the stress relaxation temperature of Cu(Ag) thin films, and thus leading to the enhanced resistance to the void formation, which starts at $300^{\circ}C$ in the pure Cu thin films. Moreover, Cu(Ag) thin films shows the increased adhesion properties, possibly resulting from the Ag segregating to the interface. Consequently, the Cu(Ag) thin films can be used as a metallization of advanced TFT-LCDs.