• 한국환경과학회지
• /
• 제23권1호
• /
• pp.105-112
• /
• 2014

With the incorporation of hydrogen peroxide($H_2O_2$) and NaLS as an initiator and emulsifier, acrylic acid monomer was graft copolymerized with sodium alginate prepared from alginic acid, and then the grafted copolymer was confirmed through IR spectrometer. When the amounts of acrylic acid increased the grafting also showed increasing trend. While the contents of hydrogen peroxide was varied in the aqueous sodium alginate solution, the grafting efficiency decreased gradually as the amounts of initiator increased.

• 원예과학기술지
• /
• 제32권6호
• /
• pp.788-793
• /
• 2014

Vegetative propagation of walnut is difficult compared with that of other fruit and nut species. The present study assessed three methods of grafting (patch, shield, and chip) at various periods of walnut growth and with different timings of grafting in walnut. Early May was the best time for grafting, at which time the highest success rate was obtained by the patch method (96%), followed by chip-budding (75%), while shield-grafting showed the lowest efficiency (10%). Patch-grafting was also successful (75-80%) in early August and moderately successful in mid-June (51-55%), while the shield and chip methods had no success during these two times (0.00%). Patch-grafting was more efficient and also induced better callus formation and scion growth than the other two methods. The genotypes used did not affect grafting efficiency. The best results were obtained by patch-budding in both tested genotypes. The present findings show the potential value of patch-grafting in early May as a propagation method for walnut for establishment of guidelines for propagation.

• 생물환경조절학회지
• /
• 제24권2호
• /
• pp.57-62
• /
• 2015

전통적인 접목은 노동 집약적인 작업이며, 접사의 실수에 의한 불량 접목묘가 쉽게 발생할 수 있다. 접목로봇의 개발은 전통적인 접목방법의 대안책으로써 주목받고 있다. 본 연구에서는 상업적으로 생산된 자동 접목로봇과 공정육묘장에서 전통적으로 행해지는 접목방법에서의 접목 효율성을 구명하기 위해 수행되었다. 고추(Capsicum annuum L.) '부촌'과 '안성맞춤' 품종이 각각 접수와 대목으로 2013년 3월 29일에 파종되었으며, 접목로봇과 초보자, 접목 전문가에 의해 2013년 5월 31일에 접목되었다. 접목 후 접목 효율성과 접목 특성을 초장, 시간당 접목 성공률과 실패율로 비교하였다. 초장은 전문가에 의한 접목묘의 초장의 차이가 최대 0.6cm로 가장 균일하게 나타났으나 초보자에 의한 접목묘의 초장 차이는 최대 2.1cm로 가장 불균일하였다. 접목로봇에 의한 접목묘의 최대 초장 차이는 최대 1cm로 균일하였다. 시간당 접목묘의 개수에서 접목로봇에 의해서 접목된 묘의 수는 접목로봇(667주)에서 전문가(466주)에 의한 접목에 비하여 가장 많게 나타났다. 그러나 접목로봇에 의한 접목 실패율은 21.7%로 가장 높게 나타났다. 본 연구 결과는 접목로봇 기술이 농업에서 현장 적용 가치가 있으며, 상업적 공정육묘장에서 사용될 수 있고 전통적인 접목의 단점을 보완할 수 있다는 것을 증명하였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.307-312
• /
• 2000

This study was carried out to develop an automatic grafting system suitable for fruit-vegetable seedlings. The study consisted of two research sections: 1) development of a medium-sized, low-cost automatic grafting system for cooperative farms and commercial seedlings production company, and 2) commercializing research for prototype development based on the above concepts. The grafting robot developed in this research can be described as follows, a. Developed grafting robot can cover the whole operations for grafting scion and rootstock, only if operator provides scion and rootstock tray. b. Five seedlings can be grafted at one time, and about 1,200 seedlings can be grafted in one hour. c. The success ratio of mechanical grafting scion and rootstock with ceramic pin bonding provided by the holder is more than 95% when the conditions of seedlings are satisfied. d. The grafting efficiency has improved over 10 times compared with manual work, and the grafting cost generated 44% savings.

• 한국조경학회지
• /
• 제28권1호
• /
• pp.48-53
• /
• 2000

This study was carried out to investigate the growth characteristics and propagation methods of Prunus species as woody landscape plants. Both the flowering time and the survival rate of grafting were investigated. The results are obtained as follows: The total of flowering period of Prunus species in Kyonggi province area lasted for about 26 days. The flowering time of the species overlaps. These observations suggest that the possibility of interspecific pollination among Prunus species is very high in the kyonggi province area. The total number of flowers in the species in area was in as follows decreasing order : (1) Prunus yedoensis >Prunus pendula var. ascendens > Prunus subhitella > Prunus sesrulata for. fugenzo > Prunus leveillenana var. pendula. The number of carpels in each flower ranged from 0.3 for Prunus subhirtella to 1.8 for Prunus serulata for. fugenzo. In the caseof Prunus sesrulata for. fugenzo, the carpels appeared to be degenerated and thus losted their function. However, there exist two tyoes of Prunus subhirtella. While one type had normal carpel, the other had the degenerated one. The survival rate of grafting was investigated on May 19. Eighty there percent of the plants survived when the grafting was made in the greenhouse in January whereas the plants grafted in nursery in March survived less in that Prunus suhirtella showed 64%, Prunus leveilleana var. pendula 47%, Prunus sesrulata for. fugenzo 43%, Prunus yedoensis 62% and Prunus pendula var. ascendens 24%, respectively. Therefore, it suggested that high humidity and optimal temperature appeared to incase the survival rate of the grated plants. We therefore propose here that grafting should be done in the greenhouse that both humidity and temperature could be controlled to enhance the efficiency of grafting. This will enable as to perform grafting in winter as well.

• 한국염색가공학회지
• /
• 제7권4호
• /
• pp.45-53
• /
• 1995

Natural rubber(NR)-polyacrylamide(PAAm) graft copolymers(GP)(toluene soluble GP : TSGP, water dispersible GP : WDGP) have been synthesized as coupling agents by pre-emulsification methods based on "inverse emulsion graft polymerization" technique. The polymerization was carried out at $65^{\circ}C$ using Azobisisobytyro nitrile(AIBN) as an initiator in the inverse emulsion system formed by inxing NR toluene solution with inverse emulsion of awueous AAm solution emulsified with $Tween^{\#}$ 80 in toluene. The mechanism of inverse emulsion graft copolymerization was studied on AAm conversion, % grafting, grafting efficiency, NR conversion, production ratio of TSGP and amount of GP(sum of TSGP and WDGP). The reaction has been confirmed through use of optical microscope to proceed via adsorption of emulsifier colloid particles onto the stretched NR molecule. From the analysis of the effects of various polymerization conditions on the grafting, it has also been found that the present rection system can easily yield high(over 90%) grafting efficiency and AAm conversion and relatively high(over 80%) NR conversion.onversion.

• Current Research on Agriculture and Life Sciences
• /
• 제15권
• /
• pp.115-122
• /
• 1997

과채류의 재배에 있어서 접목은 작물의 안정적인 생산과 품질 향상을 위해 없어서는 안되는 기술이다. 그러나 지속적인 숙련 노동력의 감소와 농촌 인구 노령화 등으로 나타나는 노동력 부족 현상은 집목묘의 대량생산 공급에 어려움이 되고 있다. 본 연구에서는 기계접목에 있어서 접목법이 간단하며 접합부자재가 불필요한 삽접법을 이용하는 기계접목 메카니즘 개발의 기초연구를 수행하였다. 트레이상의 육묘상태에서 자동으로 접목하기 위한 기계접목의 기초연구로써 1본씩 수동 공급하는 반자동 기계삽접의 메카니즘 개발에 관한 연구로서 얻어진 결과를 요약하면 다음과 같다. 1. 접합부자재를 사용하지 않고 대부분 과채류에 적용가능한 삽접 기계접목장치의 메카니즘을 구성하였다. 2. 오이를 접수로 하고 신토좌와 흑종을 대목으로 하는 기계접목시험에서 모두 98%의 접목성공율을 나타냈다. 3. 1본 수동 공급에 의한 기계접목 시스템은 10초 정도로 접목 성능은 저조하지만 기계접목 메카니즘의 가능성을 확인하였다.

• Elastomers and Composites
• /
• 제48권1호
• /
• pp.39-45
• /
• 2013

Haake Rheocorder로 각종 과산화물 개시제를 사용하여 ethylene-propylene-diene terpolymer (EPDM)에 단량체 citraconic acid (CCA)을 용융 그라프트 중합을 하여 그라프트 중합물 CCA-g-EPDM을 얻었으며, 이때 효율적인 그라프트 정도와 우수한 성능을 지닌 그라프트 중합물을 얻기 위해서 최적의 반응조건과 최적의 단량체/개시제 농도를 찾는 것은 매우 중요하다. 따라서 본 연구에서는 반응조건과 단량체 및 개시제 함량이 CCA-g-EPDM의 그라프트 정도, 그라프트 효율, 가교정도 (겔화도), 용융흐름지수(MI) 및 기계적 물성 등에 미치는 영향에 초점을 맞추었다. 그라프트 정도와 가교도가 증가함에 따라서 인장강도는 상당히 증가한 반면, 파괴신도 및 MI는 감소하였다. 개시제 중에서 2,5-dimethyl-2,5-di(tert-butyl peroxy)-hexane (T-101)가 가장 우수한 그라프트 정도 (2.31%)를 나타내었으며, CCA와 T-101의 함량이 증가함에 따라 그라프트 정도가 크게 증가하였다. 그리고 그라프트 정도는 반응(혼합)온도 및 반응시간이 증가함에 따라 역시 증가하다가 어느 온도/시간 이상에서는 안정화 혹은 약간 감소하는 경향을 나타내었다. 이러한 영향으로 결과로부터 최적의 단량체/개시제 농도는 5/0.05 wt%이었으며, 최적의 반응온도/시간은 $180^{\circ}C$/15분인 것을 알 수 있었다.

• Elastomers and Composites
• /
• 제28권3호
• /
• pp.191-197
• /
• 1993

The graft copolymerization of methyl methacrylate(MMA) onto natural rubber latex(NRL) initiated by t-butyl hydroperoxide(t-BHPO) was investigated in aquous medium. The grafting percentage, grafting efficiency and total conversion were observed in various reaction conditions such as monomer, initiator and emulsifier concentration, reaction temperature, reaction time and agitation speed. The optimum conditions for the graft copolymerization onto natural rubber latex were as follows ; At given monomer concentration of $3{\times}10^{-2}mole/l$, the maximum grafting percentage was appeared in the case of grading in initiator concentration of $4{\times}10^{-2}mo1e/l$ and emulsifier concentration of 0.2wt.% at $40^{\circ}C$ for 5hrs.

• 한국염색가공학회지
• /
• 제15권3호
• /
• pp.154-160
• /
• 2003

Polypropylene nonwoven fabrics were grafted with acrylic acid by a preirradiation method by using electron beam accelerator. The effect of irradiation dose, storage time, concentration of acrylic acid, reaction temperature, reaction time and Mohr's salt concentration on the degree of grafting were investigated in detail. The grafted Polypropylene nonwoven fabrics were characterized using IR spectroscopy and SEM. The results showed that the degree of grafting increased with increasing absorbed dose and the Mohr's salt in the acrylic acid solution promoted grafting efficiency.