• 한국염색가공학회지
• /
• 제5권1호
• /
• pp.26-32
• /
• 1993

This study is concerned with the graft polymerization of acrylamide onto the surfaces of polyethylene and polyethylene terephthalate films treated with on corona discharge. In the case, peroxides formed by the corona discharge treatment are likely to be the species responsible for initiating the graft polymerization. This treatment produced a continuous charge in wettability and also amid group density on the polymer surface, as evidenced by water contact angle measurement, Fourier-transform infrared spectroscopy in the attenuated total reflectance mode, and electron spectroscopy for chemical analysis. Both of the merely corona-treated film and the subsequently grafted film are discussed as a function of time after treatment and water washings.

• Carbon letters
• /
• 제11권3호
• /
• pp.216-223
• /
• 2010

Two-types of ionically modified multi-walled carbon nanotube (MWNTs) based sensors were developed by radiationinduced graft polymerization using vinyl monomers such as 3-(butyl imidazol)-2-(hydroxyl)propyl methyl methacrylate and 1-[(4-ethenylphenyl)methyl]-3-buthyl-imidazolium chloride with ionic properties, in aqueous solution at room temperature. Subsequently, the tyrosinase-immobilized biosensor was fabricated by a hand-casting of the ionic property-modified MWNTs, tyrosinase, and chitosan solution as a binder onto ITO glass surface. The sensing ranges of the tyrosinase-biosensor for phenol in phosphate buffer solution was in the range of 0.005~0.2 mM. The total phenolic compounds mainly such as caffeine of the tyrosinase-immobilized biosensor for commercial coffee were also determined.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 추계 총회 및 학술발표회
• /
• pp.199-203
• /
• 2004

Fibrous arsenic (As) adsorbent was synthesized by loading zirconium (Zr) on fibrous phosphoric adsorbent that was directly synthesized by radiation-induced graft polymerization of 2-hydroxyethyl methacrylate phosphoric acid on polyethylene-coated polypropylene nonwoven fabric. Zirconium reacted with phosphoric acid grafted in the polyethylene layer. Zirconium density of the resulting adsorbent was 4.1 mmol/g. The breakthrough curve of As(V) adsorption was independent of the flow rate up to $1300\;h^{-1}$ in space velocity. The total capacity of As(V) was 2.0 mmol/g-adsorbent at pH of 2. The adsorbed Zr(IV) could be evaluated by 0.4 M sodium hydroxide solution because negligible Zr(IV) could be found in the eluted solution.

• 한국염색가공학회지
• /
• 제15권2호
• /
• pp.102-108
• /
• 2003

Before studying graft polymerization of PP(polypropylene) nonwoven fabrics by electron beam preirradiation method, mechanical properties, thermal properties and degree of crystallinity of original and electron beam irradiated PP nonwoven fabrics were investigated. Morphological surface changes of electron beam irradiated PP nonwoven fabrics were not observed. And the melting temperature and crystallinity of electron beam irradiated PP nonwoven fabrics also did not change as compared with untreated PP nonwoven fabrics. But the breaking strength of electron beam irradiated PP nonwoven fabrics decreased with increasing electron beam absorbed dose due to breakdown of some parts of polymer main chain.

• 폴리머
• /
• 제34권2호
• /
• pp.150-153
• /
• 2010

본 연구에서는 방사선에 의한 그래프트 중합을 이용하여 생체분자가 고정화된 다중벽탄소나노튜브 (MWCNT)를 제조하였다. 생체분자의 고정화를 위하여 MWCNT에 아크릴 산을 그래프트 중합하였다. 열중량분석과 라만 분석을 통하여 MWCNT에 폴리(아크릴 산)이 효과적으로 그래프트 중합되었음을 확인하였다. 폴리(아크릴 산)이 그래프트 된 MWCNT에 DNA와 단백질과 같은 생체분자들을 고정화하였다. X-선 광전자 분광법과 형광분석을 통하여 생체분자들이 성공적으로 MWCNT에 도입되었음이 확인되었다.

• Elastomers and Composites
• /
• 제44권3호
• /
• pp.209-221
• /
• 2009

폴리올레핀은 뛰어난 물성과 낮은 가격으로 인하여 가장 큰 시장을 가진 범용 고분자이다. 그러나, 폴리올레핀은 대표적인 비극성 고분자로, 다른 물질과의 상호 작용이 중요한 상용화제, 개질제, 접착제 등의 용도로는 그 사용이 제한될 수 밖에 없다. 따라서, 보다 극성을 가진 고분자 사슬을 폴리올레핀에 블록 또는 그라프트 공중합체의 형태로도입함으로써 기능성 폴리올레핀 하이브리드를 제조하려는 노력이 계속되어 왔다. 특히, 잘 제어된 구조와 조성을 가진 공중합체를 제조하기 위하여 리빙라디칼 중합법이 사용될 수 있으며, 그 중 조절라디칼 중합법은 중합을 잘 제어할 수 있다는 장점 이외에 다양한 단량체종과 중합 공정에 적용될 수 있다는 점에서 많은 주목을 받고 있다. 이에 따라, 본 리뷰 논문에서는 조절라디칼 중합법을 이용한 폴리올레핀 기반 블록 또는 그라프트 공중합체의 제조에 대하여 정리해 보았다. 폴리이소부틸렌, 폴리에틸렌, 폴리프로필렌 등의 비극성 범용고분자들과 폴리아크릴레이트, 폴리메타아크릴레이트, 폴리스티렌 등의 극성 고분자들과의 하이브리드를 통한 기능성 폴리올레핀의 제조에 대하여 정리하였다.

• Elastomers and Composites
• /
• 제43권4호
• /
• pp.221-229
• /
• 2008

전분을 매트리스 고분자로 하여 아크릴 모노머인 2-ethylhexylacrylate와 methyl methacrylate, acrylic acid를 그래프트 중합하였다. 중합은 라디칼 유화중합에 의하여 전분의 함량을 증가시키면서 수행되었다. 효소인 $\alpha$-amylase 가 전분 대비 0.174% 투입되었을 때 가장 안정한 중합물이 얻어졌으며 전분의 함량이 증가함에 따라 중합물의 유리전이온도가 상승하였다. 전분 함량의 증가에 따라 계내의 -OH기가 많아짐에 따라 중합물의 입자 크기와 점도가 증가하였다. Peel strength는 전분 함량이 증가할수록 -OH기 증가에 의해 중합물이 피착체 표면과의 친화력 상승이 일어나서 증가하였다. 반면 초기 점착력은 전분 함량이 증가할수록 유리전이온도의 증가에 따라 필름의 경도가 증가하면서 감소하였다.

• 한국염색가공학회지
• /
• 제7권4호
• /
• pp.45-53
• /
• 1995

Natural rubber(NR)-polyacrylamide(PAAm) graft copolymers(GP)(toluene soluble GP : TSGP, water dispersible GP : WDGP) have been synthesized as coupling agents by pre-emulsification methods based on "inverse emulsion graft polymerization" technique. The polymerization was carried out at $65^{\circ}C$ using Azobisisobytyro nitrile(AIBN) as an initiator in the inverse emulsion system formed by inxing NR toluene solution with inverse emulsion of awueous AAm solution emulsified with $Tween^{\#}$ 80 in toluene. The mechanism of inverse emulsion graft copolymerization was studied on AAm conversion, % grafting, grafting efficiency, NR conversion, production ratio of TSGP and amount of GP(sum of TSGP and WDGP). The reaction has been confirmed through use of optical microscope to proceed via adsorption of emulsifier colloid particles onto the stretched NR molecule. From the analysis of the effects of various polymerization conditions on the grafting, it has also been found that the present rection system can easily yield high(over 90%) grafting efficiency and AAm conversion and relatively high(over 80%) NR conversion.onversion.

• 방사선산업학회지
• /
• 제6권4호
• /
• pp.317-322
• /
• 2012

In this study, the preparation of a temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm)-grafted surface was performed using an eco-friendly and biocompatible ion beam-induced surface graft polymerization. The surface of a perfluoroalkoxy (PFA) film was activated by ion implantation and N-isopropylacrylamide (NIPAAm) was then graft polymerized selectively onto the activated regions of the PFA surfaces. Based on the results of the peroxide concentration and grafting degree measurements, the amount of the peroxide groups formed on the implanted surface was dependant on the fluence, which affected the grafting degree. The results of the FT-IR-ATR, XPS, and SEM confirmed that the NIPAAm was successfully grafted onto the implanted PFA. Moreover, the contact angle measurement at different temperatures revealed that the surface of the PNIPAAm-grafted PFA film was temperature-responsive.

• Nuclear Engineering and Technology
• /
• 제10권4호
• /
• pp.195-201
• /
• 1978

감마선을 이용하여 폴리에스터직포에 methacylic acid와 methyl methacylate를 graft 종합반응시켜서 그 반응성을 보았다. 폴리에스터직포에 acrylic acid, methacrylic acid, methyl methacrylate를 중합반응 시켰을 때 graft 효율은 monomer 혼합용액내에 포함되어 있는 용매의 dielectric constant에 따라 상당한 차이를 나타내었다. Graft 수율은 방사선 선량과 monomer 농도 및 swelling agent의 농도에 좌우되었다. MA graft copolymer의 glass transition temperature (101$^{\circ}C$)와 melting point (238$^{\circ}C$)를 측정하였고, 정전기 효과는 frictional electricity 8,000V에서 half life가 0 sec이었으며, moisture regain는 5.6%, wicking time은 1 sec이었다.