• 생물환경조절학회지
• /
• 제5권2호
• /
• pp.160-166
• /
• 1996

김등과 Kim등이 재발한 공정묘 생산용 풍동을 사용하여, 인공광하의 묘개체군내외에서 기온, 상대습도 및 포차(vapour pressure deficit) 등의 미기상 특성에 미치는 기류속도의 효과를 분석하였다. 기온차의 최고치가 초장 근처에서 나타났으며, 이러한 결과는 공정묘의 생육이 진행될수록 더욱 분명하게 나타났다. 묘개체군 내부에서는 배지 또는 엽으로부터의 증발산으로 인하여 개체군 외부에서의 기온에 비해서 0.7-l.4$^{\circ}C$ 정도 낮게 나타났는데, 기류속도가 낮을수록 기온차가 높게 나타났다. 묘개체군 내부의 상대습도 분포에 미치는 기류속도의 영향이 매우 큰 것으로 나타났다. 기류속도가 증가할수록 묘개체군 내외에서의 상대습도차는 작게 나타났는데, 이것은 기류속도의 증가에 따라 엽에서의 water potential이 감소되었기 때문인 것으로 판단된다. 배지표면으로부터의 높이가 증가함에 따라 포차가 증가하였다. 이와 같은 결과는 수증기 유속의 흐름이 상방향으로 이루어짐을 의미하는 것이다. 생육단계에 따른 포차의 변화는 엽면적 지수가 클수록 수직방향으로의 기울기가 크게 나타났다. 한편, 후부에서의 상대습도 및 포차는 중앙부에서 보다 약간 낮게 나타났다. 기류속도에 따라 묘개체군의 수직방향 및 기류진행방향으로 기온, 상대습도 및 포차의 기울기가 크게 나타났는데, 이러한 미기상 요소의 기울기는 묘개체군의 불균일 생장을 초래할 수 있다.

• 상하수도학회지
• /
• 제20권5호
• /
• pp.691-700
• /
• 2006

This study conducted to optimize the design and operation of orifice typed distribution channels which were generally constructed to link the rapid mixing process and flocculation/sedimentation basin. To accomplish the goal of this study, programming step method using FORTRAN 90, was applied it to simulate the performance of existing distribution channel in the selected S DWTP (Drinking Water Treatment Plant). The proposed step method program was validated in terms of the feasibility with comparison between the measurement and prediction value in each orifice. From the evaluation results of the current conditions with the design and operation, it was revealed that the existing gradient of the tapered channel is not appropriate. Also, we suggested that in the case of the inlet width being 3.5m, reducing the downstream width by about 0.5m would make more equitable distribution flow in the channel. Consequently, dealing with various conditions of the design and operation with distribution channel, we could conclude that for the parallel typed channel, as the width is wider and the diameter of orifice is smaller, the more equitable distribution occur. In addition, the inlet flowrate and the number of orifice can affect the flow velocity in the channel.

• International Journal of Aeronautical and Space Sciences
• /
• 제3권1호
• /
• pp.74-85
• /
• 2002

The numerical experiment has been conducted to investigate the unsteady shock wave reflecting phenomena. The cell-vertex finite-volume, Roe's upwind flux difference splitting method with unstructured grid is implemented to solve unsteady Euler equations. The $4^{th}$-order Runge-Kutta method is applied for time integration. A linear reconstruction of the flux vector using the least-square method is applied to obtain the $2^{nd}$-order accuracy for the spatial derivatives. For a better resolution of the shock wave and slipline, the dynamic grid adaptation technique is adopted. The new concept of grid adaptation technique, which is much simpler than that of conventional techniques, is introduced for the current study. Three error indicators (divergence and curl of velocity, and gradient of density) are used for the grid adaptation procedure. Considering the quality of the solution and the numerical efficiency, the grid adaptation procedure was updated up to $2^{nd}$ level at every 20 time steps. For the convenience of comparison with other experimental and analytical results, the case of interaction between the straight incoming shock wave and a sharp wedge is simulated for various flow conditions. The numerical results show good agreement with other experimental and analytical results, in the shock wave reflecting structure, slipline, and the trajectory of the triple points. Some critical cases show disagreement with the analytical results, but these cases also have been proven to show hysteresis phenomena.

• Tribology and Lubricants
• /
• 제20권4호
• /
• pp.209-217
• /
• 2004

Lubrication characteristics between a cylinder block and a valve plate for high speed bent-axis type hydraulic pump play an important role in volumetric efficiency and durability of pump. In this paper, a finite element method is presented for the computation of the pressure distribution between a cylinder block and a valve plate for high speed bent-axis type hydraulic pump. Also, a Runge-Kutta method is applied to simulate the cylinder block dynamics of three-degrees of freedom motion. From the results of computation, we can draw two major conclusions. One is related to the fluid film characteristics between a cylinder block and a valve plate and the other is related to the average leakage that is determined by the pressure gradient and the clearance near the discharge port. The numerical results of cylinder block dynamics were compared with the experimental results using eddy-current type gap sensors those are fixed at a pump housing.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권3호
• /
• pp.289-295
• /
• 2005

Instrumentation and Control (I&C) of the Neutral Beam Test Stand (NB- TS) Facility at the Korea Atomic Energy Research Institute (KAERI) for the Korea Superconducting Tokamak Advanced Research (KSTAR) project has been underway since the start of the project to answer the diverse requests arising from the various facets of the development and construction phases of the project. Optical signal transmission constitutes a significant portion of I&C works and has been performed for the entirety of the project. During the NB- TS construction and related experiments, significant achievements to a more accurate as well as more refined optical signal transmissions have been made. Examples of those I&C works that utilized the optical signal transmission are the Langmuir probe signal transmission, gradient grid current signal transmission, gas flow control and signal transmission, ion source temperature measurement, beam line component temperature monitoring, and coolant flow signal transmission, etc. These optical signal transition provisions are now performing part of the indispensable functions for the proper operation of the NB- TS facility. Attained experience and expertise are expected to be well applied to the upcoming main neutral beam injection (NBI) system construction for the KSTAR project.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권2호
• /
• pp.41-46
• /
• 2015

The drag of the excess charge in an electrical double layer at the solid fluid interface due to water flow induces the streaming current, i.e., the streaming potential (SP). Here we introduce a sandbox experiment to study this hydroelectric coupling in case of a tracer test. An acrylic tank was filled up with homogeneous sand as a sand aquifer, and the upstream and downstream reservoirs were connected to the sand aquifer to control the hydraulic gradient. Under a steady-state water flow condition, a tracer test was performed in the sandbox with the help of peristaltic pump, and tracer samples were collected from the same interval of five screened wells in the sandbox. During the tracer test, SP signals resulting from the distribution of 20 nonpolarizable electrodes were measured at the top of the tank by a multichannel meter. The results showed that there were changes in the observed SP after injection of tracer, which indicated that the SP was likely to be related to the solute transport.

• 한국환경과학회지
• /
• 제13권2호
• /
• pp.149-159
• /
• 2004

In the removal of heavy metals from the mine deposit using electrokinetic processes, the effects of operation under both constant current and constant potential conditions were estimated. The results of soil pH distributions for DDW-20 V and DDW-100 mA cases after the electrokinetic remediation tests were observed. In the former case, soil pH was not much changed and kept to almost constant value just little higher than initial soil pH of 3.52, except near the cathode, which was about pH 5. While in the latter case, soil pHs of anode and the cathode regions were less than pH 3 and about 6, respectively. The electroosmotic flow to the cathode increased rapidly till 10 hrs and decreased steadily and then maintained to constant rate until the end of operation at constant current condition. Electric potential gradient was continuously increased to as much as 34.375 V/cm. At the steady state, values of the apparent electric conductivity for DDW-20 V and DDW-100 mA were around 40 ${\mu}\textrm{s}$/cm and 30 ${\mu}\textrm{s}$/cm, respectively. In the DDW-100mA test, Cu, Cd, and Zn except Pb showed the tendency of moving toward the cathode. While in the DDW-20 V case, it was observed that Cu, Zn, and Pb except Cd were not moved to any directions. The results of the tests demonstrated that the electrokinetic soil remediation process could be operated better under constant current condition than constant electric potential condition.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권3호
• /
• pp.109-118
• /
• 2013

Characteristics of the transport of zero-valent iron nanoparticles (nZVI) in an aquifer were investigated to evaluate an application of nZVI-based reactive zone technology. Main flow direction of groundwater was north. Preferential flow paths of the groundwater identified by natural gradient tracer test were shown northeast and northwest. The highest groundwater velocity was $4.86{\times}10^{-5}$ m/s toward northwest. When the breakthrough curves obtained from the gravity injection of nZVI were compared with the tracer curves, the transport of nZVI was retarded and retardation factors were 1.17 and 1.34 at monitoring wells located on the northeast and northwest, respectively. The ratios of the amount of nZVI delivered to the amount of tracer delivered at the two wells mentioned above were 24 and 28 times greater than that of the well on the main flow direction, respectively. Attachment efficiency based on a filtration theory was $4.08{\times}10^{-2}$ along the northwest direction that was the main migration route of nZVI. Our results, compared to attachment efficiencies obtained in other studies, demonstrate that the mobility of nZVI was higher than that of results reported in previous studies, regardless of large iron particle sizes of the current study. Based on distribution of nZVI estimated by the attachment efficiency, it was found that nZVI present within 1.05 m from injection well could remove 99% of TCE within 6 months.

• 한국해양학회지:바다
• /
• 제29권2호
• /
• pp.77-100
• /
• 2024

진해·마산만에 대한 연구는 그동안 해수순환, 조석, 조류, 적조, 수질, 빈산소 환경을 주제로 많이 연구되었으나 주로 단기간 동안 일어나는 해양현상에 대해 연구가 수행되었으며, 만 전체적인 해수순환을 일으키는 물리적 기작을 자세히 살펴본 연구는 부족했다. 오염 물질의 이동과 확산 같은 현상은 주로 계절별로 변동성이 크기 때문에, 이 연구에서는 진해·마산만 해역의 해수순환이 계절적으로 어떻게 변동하는지를 파악하고자 하였다. 이를 위하여 3차원 해양 순환 모델을 이용하여 2016년부터 2018년까지 진해·마산만의 해수순환을 수치모의하고, 여름철과 겨울철 해수순환을 표층, 중층, 저층에 대하여 살펴보았다. 또한 조석, 바람, 담수 유입에 대한 민감도 실험을 수행하여 각 요인들이 해수 유동에 미치는 영향을 분석하였다. 진해·마산만의 해수순환은 가덕수도 저층에서 대한해협의 해수가 유입되고, 표층에서 진해·마산만의 해수가 유출되는 대류성 염하구 순환이 일어난다. 가덕수도를 통해 교환되는 해수의 순환은 크게 진해만 동부해역과 진해만 서부해역으로 나누어져 일어난다. 각 해역의 수로 방향을 기준으로 해수 수송량을 계산하였을 때, 진해만 동부해역의 남북방향 해수 교환 수송량은 진해만 서부해역에서 일어나는 동서방향 해수 교환량보다 겨울철에는 2.3배, 여름철에는 1.4배 크다. 진해만 서부해역은 계절별로 작용하는 힘들의 균형이 변화하여 해수순환 특성이 계절에 따라 크게 다르다. 겨울철에는 북서풍이 만드는 전단응력과 해수면 기울기의 영향으로 표층 해류가 남쪽으로, 저층 해류는 북쪽으로 흐르는 남북방향 대류성 순환이 강화된다. 반면, 남서풍이 부는 여름철에는 바람 응력에 의해 표층 해수가 동쪽으로 유출되고, 또한 남동쪽 해수면이 높아 북쪽 방향 순압성 압력경도력이 커져 동쪽 방향 유속이 강화된다. 저층에서는 밀도 구배가 커져 경압성 압력경도력이 남쪽으로 크게 작용하여 지형류 균형에 의해 가덕수도의 해수가 서쪽으로 강하게 유입하는 동서방향 대류성 순환이 겨울철보다 26% 강화된다. 진해만 서부의 대류성 순환은 겨울과 여름 모두 조류와 바람의 영향을 크게 받는다. 진해만 동부해역과 마산만에서는 모든 계절에 표층에서는 해수가 외해로 유출되고, 저층에서는 해수가 만 안쪽으로 유입되는 전형적인 염하구 순환을 보였다. 겨울철에는 바람과 담수유입이, 여름철에는 조류의 영향이 남북방향 염하구 순환 규모에 크게 기여하였다. 진해만 동부해역에는 지형의 영향을 받아 형성된 조석 잔차류도 뚜렷하다. 이 연구에서 제시한 진해·마산만의 계절별 해수순환 특성은 이 해역의 오염물질 확산, 여름철 빈산소수괴의 형성 기작 파악, 적조 생물의 유입과 유출을 이해하는 데 도움이 될 것으로 기대된다.

• 설비공학논문집
• /
• 제25권2호
• /
• pp.101-108
• /
• 2013

This paper is presented an experimental study of flow boiling heat transfer characteristics of ammonia, and is focused on pressure gradient and heat transfer coefficient of the refrigerant flow inside horizontal small tube with inner diameter of 3.0 mm and length of 2000 mm. The direct heating method is applied for supplying heat to the refrigerant, where the test tube is uniformly heated by electric current. The local heat transfer coefficients were obtained over a heat flux range of 20 to $80kW/m^2$, a mass flux range of 50 to $500kg/m^2s$, a saturation temperature range of 0 to $10^{\circ}C$, and quality up to 1.0. The pressure drops increase with increasing mass flux and heat flux, and with decreasing saturation temperature. The heat transfer coefficients increase with increasing mass flux and saturation temperature in middle and high quality region. And the local heat transfer coefficient increase with increasing heat flux in low quality region. The heat transfer coefficient of the experimental result was compared with six existing heat transfer coefficient correlation. A new boiling heat transfer coefficient correlation based on the superposition model for ammonia in small tubes is developed average deviation of -0.17% and mean deviation of 10.85%.