• Clean Technology
• /
• v.26 no.2
• /
• pp.102-108
• /
• 2020

In recent years, packed column has been widely used in separation processes, such as absorption, desorption, distillation, and extraction, in the petrochemical, fine chemistry, and environmental industries. Packed column is used as a contacting facility for gas-liquid and liquid-liquid systems filled with random packed materials in the column. Packed column has various advantages such as low pressure drop, economical efficiency, thermally sensitive liquids, easy repairing restoration, and noxious gas treatment. The performance of a packed column is highly dependent on the maintenance of good gas and liquid distribution throughout a packed bed; thus, this is an important consideration in a design of packed column. In this study, hydraulic pressure drop, hold-up as a function of liquid load, and mass transfer in the air, air/water, and air-NH₃/water systems were studied to find the geometrical characteristic for raschig super-ring experiment dry pressure drop. Based on the results, design factors and operating conditions to handle noxious gases were obtained. The dry pressure drop of the random packing raschig super-ring was linearly increased as a function of gas capacity factor with various liquid loads in the Air/Water system. This result is lower than that of 35 mm Pall-ring, which is most commonly used in the industrial field. Also, it can be found that the hydraulic pressure drop of raschig super-ring is consistently increased by gas capacity factor with various liquid loads. When gas capacity factor with various liquid loads is increased from 1.855 to 2.323 kg^-1/2 m^-1/2 S^-1, hydraulic pressure drop increases around 17%. Finally, the liquid hold-up related to packing volume, which is a parameter of specific liquid load depending on gas capacity factor, shows consistent increase by around 3.84 kg^-1/2 m^-1/2 S^-1 of the gas capacity factor. However, liquid hold-up significantly increases above it.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.3
• /
• pp.135-153
• /
• 2019

The purpose of this study was to develop teaching-learning plans applying ARCS strategies for food safety education, focusing on units related to the 'food selection and safe cooking'. To achieve this purpose, this study was conducted in the following order of analysis, design, development, assessment I, revision I, assessment II, revision II, and completion. In the analysis stage, 2015 revised curriculum and middle school technology-home economics textbooks(12 kinds) contents of 'food selection and safe cooking' among content elements of core concept 'safety' were analyzed. In the design and development stages, teaching-learning plans, teaching-learning materials, and evaluation rubric for teaching-learning outcomes using the ARCS motivation strategy were developed. In the phases of assessment I and revision I, evaluation items were selected as open-ended questions about food safety education factors and ARCS strategies, and their validities were verified by four experts. The teaching-learning plans for nine lessons were revised based on the feedbacks such as evaluation plans considering the correspondence between instruction and evaluation, strategy to reinforce intrinsic motivation, correction of improper contents composition, and so on. In the phases of assessment II and revision II, the validity of the three items, including relevance of each teaching-learning to food safety education, suitability of learning goals, and appropriateness of motivation strategy, was verified by seven experts. The final teaching-learning plans for 10 lessons were developed by revising and supplementing the data by compiling opinions of the assessment II. It is expected that this study can contribute to food safety education for middle school students, and that teaching-learning plans which apply ARCS strategies for food safety education will be used as good references for school teachers and curriculum developers.

• Journal of Intelligence and Information Systems
• /
• v.20 no.2
• /
• pp.179-192
• /
• 2014

Keeping in line with the recent changes in the information technology environment, the online learning environment that supports multiple users' participation such as MOOC (Massive Open Online Courses) has become important. One of the largest professional associations in Information Technology, IEEE Computer Society, announced that "Supporting New Learning Styles" is a crucial trend in 2014. Popular MOOC services, CourseRa and edX, have continued to build active learning environment with a large number of lectures accessible anywhere using smart devices, and have been used by an increasing number of users. In addition, collaborative web services (e.g., blogs and Wikipedia) also support the creation of various user-uploaded learning materials, resulting in a vast amount of new lectures and learning materials being created every day in the online space. However, it is difficult for an online educational system to keep a learner' motivation as learning occurs remotely, with limited capability to share knowledge among the learners. Thus, it is essential to understand which materials are needed for each learner and how to motivate learners to actively participate in online learning system. To overcome these issues, leveraging the constructivism theory and collective intelligence, we have developed a social bookmarking system called WeStudy, which supports learning material sharing among the users and provides personalized learning material recommendations. Constructivism theory argues that knowledge is being constructed while learners interact with the world. Collective intelligence can be separated into two types: (1) collaborative collective intelligence, which can be built on the basis of direct collaboration among the participants (e.g., Wikipedia), and (2) integrative collective intelligence, which produces new forms of knowledge by combining independent and distributed information through highly advanced technologies and algorithms (e.g., Google PageRank, Recommender systems). Recommender system, one of the examples of integrative collective intelligence, is to utilize online activities of the users and recommend what users may be interested in. Our system included both collaborative collective intelligence functions and integrative collective intelligence functions. We analyzed well-known Web services based on collective intelligence such as Wikipedia, Slideshare, and Videolectures to identify main design factors that support collective intelligence. Based on this analysis, in addition to sharing online resources through social bookmarking, we selected three essential functions for our system: 1) multimodal visualization of learning materials through two forms (e.g., list and graph), 2) personalized recommendation of learning materials, and 3) explicit designation of learners of their interest. After developing web-based WeStudy system, we conducted usability testing through the heuristic evaluation method that included seven heuristic indices: features and functionality, cognitive page, navigation, search and filtering, control and feedback, forms, context and text. We recruited 10 experts who majored in Human Computer Interaction and worked in the same field, and requested both quantitative and qualitative evaluation of the system. The evaluation results show that, relative to the other functions evaluated, the list/graph page produced higher scores on all indices except for contexts & text. In case of contexts & text, learning material page produced the best score, compared with the other functions. In general, the explicit designation of learners of their interests, one of the distinctive functions, received lower scores on all usability indices because of its unfamiliar functionality to the users. In summary, the evaluation results show that our system has achieved high usability with good performance with some minor issues, which need to be fully addressed before the public release of the system to large-scale users. The study findings provide practical guidelines for the design and development of various systems that utilize collective intelligence.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.175-184
• /
• 2008

Purpose: This study was designed to investigate the fitness of adjustable dental impression trays on the Chinese and the Japanese. Material and methods: Initial design of the adjustable dental trays was developed from the results of the dental arch size of Korean adults. This design was applied to the CAD-CAM process in order to create tray model samples. Simple silicon-base molds were then replicated based on these sample models. Polyurethane injection into the silicon- base molds completed the process of creating a large number of test products. 60 Chinese dental students (male:30, female:30) from the Shanghai Second Medical University and 60 Japanese alumni from the Kumamoto high school (male:30, female:30) were selected for taking irreversible hydrocolloid impression with these trays. The width and length of the impression body were measured on several measuring points by Vernier caliper. The results were analyzed statistically to evaluate the fitness of the trays. Results: 1. Uniform impression material thickness was achieved on the Chinese and Japanese by controlling the width of the tray using stops and beveled guides. The material thickness was generally within the range of 3 mm to 6 mm. 2. In the maxillary tray of the Chinese, average thickness of the impression material of the labial vestibule of the incisal teeth was 6.2 mm, the canine was 5.9 mm and the midpalatal part 10.5 mm and the posterior palatal part 9.7 mm. These were relatively large values. 3. In the mandibular tray of the Chinese, average length of the impression material of the lingual vestibule of first, second premolar contact point was 8.9 mm, the incisal teeth was 7.8 mm and thickness of the labial part of canine was 6.8 mm and premolars 7.0 mm. These were relatively large values. 4. In the maxillary tray of the Japanese, average thickness of the impression material of the labial vestibule of the incisal teeth was 7.4 mm, the canine was 7.7 mm and the midpalatal part 9.1 mm. These were relatively large values. 5. In the mandibular tray of the Japanese, average thickness of the impression material of the labial vestibule of first, second premolar contact point was 8.4 mm, and thickness of the labial part of canine was 7.4 mm. These were relatively large values. Conclusion: This adjustable dental tray shows good accuracy to Korean because it was designed by the analysis of the dental arch size of Korean adult model. With this result, it can be applied to Chinese and Japanese, we can take more easy and accurate dental impressions.

• Archives of design research
• /
• v.17 no.4
• /
• pp.223-232
• /
• 2004

The pedestrian space on the roads shows virtually different images, depending on the local uniqueness that exists in the roadsides, to the one walking. This sort of characteristics of the region originated from the physical special structures of the roadside building the form of the place. Thus, because of the structural difference of the roadside, Pedestrian sense the difference of regions through other images. Research focused on issues of the local roadside sidewalk spaces as what roadside structure is the type that brings out the unique images of the region, and what facets are pursued additionally here, is needed. A roadside of a prosperous region filled with many Pedestrians is selected as the range for the experiment in order to analyze the structure and image of the pedestrian space. Among the roads of the selected region, the structure of the pedestrian space on the roads with more than four lanes was evaluated. As result of the analysis, the images of 10 pedestrian space could be classified into two groups by the difference in proportions of the Df/H(the width of the sidewalk and the height of the roadside building) and the D/H(the width of the road and the height of the roadside building). In order to observe the images of the pedestrian space classified into two groups, the adjectives used to describe the image of scenery were researched, enabling one to induce the images of the two groups form them. One of the images is the image of prosperities, and the other is the image of pleasantness. In addition, as result to the evaluation focused on the characteristic of the roadside buildings in the selected area, it could be divided into two groups, i.e., the commercial region and the business region. The image of prosperities was sensed on the sidewalks of the commercial region, while the image of pleasantness was seen on that of the business region. This study enabled the acknowledgment that in a pedestrian space on a road structure with more than four lanes, the Pedestrian sense different images, depending on the proportional difference in the width of the sidewalk & the height of the roadside building, and the width of the road & the height of the roadside building. This result is expected to be a good reference when a road structure reflecting the uniqueness of its region is to be designed, and especially when the structure of a pedestrian space is to be created.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.3
• /
• pp.18-27
• /
• 2016

A 'flowered-wall,' which are also called a 'flower plant patterned wall,' or a 'flower patterned wall,' is a wall of a building or a fence with various patterns on it. A flowered-wall can be an external mean to look into the owner's authority and values while internally it possesses the symbolic meaning of wishing the well-being and peace of the household. In the research area of the flowered-wall, the walls located in the palace were well researched in various studies across architecture, horticulture, and art design, however, the walls belonging to the local regional traditional folk houses and temples have been involved in little to no research in the landscape architectural area. Taking notice of this perspective this study researched and analyzed the cases of the flowered-walls of the traditional folk houses and the temples that belonged to the national and municipal cultural properties of Jeollabuk-do Province from the landscape architectural perspective. The whole samples were examined and it was shown that there were 9 traditional folk houses with flowered-walls. Among the temples there were 7 cases. Therefore the research focusing on tracing the shape and symbolic meaning of the flowered-walls in the 16 cultural properties located in the Jeollabuk-do Province which consisted of traditional folk houses and temples resulted in the following. Flowered-walls displayed hierarchical differentiation revolving around the main space and its spacial characteristic. This differentiation is variously displayed across the flowered-wall, gable, crack plastering, and chimney. In the case of the folk houses the symbols have the meaning of the prosperity of the household and progeny, exorcism, longevity, number of fortune, harmony, and peace etc that prays for practical wishes such as long life and good health with the prosperity of their descendants. Meanwhile in the temples, symbols indicating an easy passage into eternity, perpetuation of the Buddha-nature, and three marks of existence are applied, differentiating from the folk houses by the appliance of the religious values in the patterns. In conclusion this research resulted in the rightful illumination on the local landscape culture, the possibility of expressing the Korean sentiment through flowered-walls in the contemporary space, the reassessment of flowered-walls, and the provision of basic data for a plan to success the cultural heritage.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.1
• /
• pp.57-67
• /
• 2017

Based on the study on place name, meaning analysis of buddhist temple Palgyeng, and classifications of instructions and characteristics of writings on rocks, the main results of the study showed the following. Cheongamsa is located in the upstream of Muheulgugok Valley which was run by Hangang Jeong Gu(寒岡 鄭逑), a typical young man in the middle of the Joseon Dynasty, and overlaps with chief monk Byukam Lee Dukjin's(1896~?) object of Cheongamsa Palgyeng during Japanese colonial era. Including the mountain embracing Cheongamsa called Bullyeong-san, various characteristics of writings on rocks such as use of combination of place names including Sudosan, Seonlyeongsan, and Sinseondae, as well as Cheongamsa Temple, Bullyeongdongchun(佛靈洞天), Namuabitabul, Hogye(虎溪), Yeosan Waterfall(廬山瀑布), and Sejinam(洗 塵巖) show co-existence of Confucianism and Taoism mixed together in the temple. Especially for Cheongamsa Valley Hogye and Samsocheon(三笑泉) which is in the precincts of the temple, are realized as the symbol of the scenery of the three religion consilience of Confucianism, Buddhism, and Taoism through announcement using Hogyesamso(虎溪三笑) which originated from Yeosan Donglimsa, Jiangxi, China. Also, there are Yeosan Waterfall with a noble sense of place by negotiating with god, writing on rocks imprinted, and Yeosangyo(廬山橋) in Cheongamsa. As such, cultures of the three religion remain in various layers with the spirit of Hogyosamso symbolizing the consilience and coexistence of the three religion in Cheongamsa without the exclusiveness of Buddhism. Besides, the third precept of Yukhwagyeongbub, known to be practiced in Buddhist temples, which says "Do not only express self-assertion and ignore others" according to the dogma of working together in harmony, is in accordance with the spirits of Hogyesamso. As shown, Gimcheon Cheongamsa which is adorned with cultural landscapes of Hogyesamso, Gugokdongcheon(九曲洞天), and Palgyeng(八景), is not only good enough for the way of Buddhism and Confucianism but also for a place for the three religion consilience embracing the three religion.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.129-138
• /
• 2005

It has been assumed that the clarification of a message is a necessary element for successful communication. However, in the today's complicated and changing environment of business marketing media, it is shown that the clarification of the message of advertisement may inhibit the effectiveness of communication. This study was to examine what was effective communication in advertisement when the company, provoking the people's negative emotional response, needs to establish new identities such as the goals and the special fields of business. In particular, the study was to investigate what effect the advertising strategy of strategically emitting ambiguous messages makes on the consumer's recognition, emotional attitude, reliability, and attitude towards the company. It was hypothesized that an ambiguous message in an advertisement has an effect on the consumer's recognition, emotional attitude, reliability, and attitude towards the company. Three texts from the 'Imagination Praises' campaign of KT&G which has been in process since 2003 were systematically sampled and the survey was performed by the means of questionnaires made on the sample The results showed that the ambiguous message of advertising texts gained better responses on the consumer's attention, good impression, affirmation, memory, sympathy than the dear message and that the ambiguous message had an effect on the consumer's attitude towards the advertisement itself. Thus, it could be tentatively concluded that the ambiguous message could be more effective in recognition and recall to promote the changes of identities of the company having the people's unfavorable emotion. But there wasn't any evidence that an ambiguous message in an advertisement was more effective in terms of the consumer's emotional response, reliability, and attitude towards the company. From this, it could be inferred that the receiver had an uncomfortable, doubtful and negative attitude about the implicit expressive code contained in the message. In the future deeper qualitative studies can compensate for the limited explanation of this empirical study focused on statistical analyses.

• Archives of design research
• /
• v.17 no.1
• /
• pp.339-346
• /
• 2004

Matrix, produced by Larry & Andy Wachowski, was relatively precisely dealt with the cyber world. After the movie was released, it had a mania for the movie and was adopted into a various forms of cultural products. It was remade not only into the parodies of the other movies and TV programs, but also the clothes and miscellaneous items of the movie were reincarnated as an unique cultural trend. The cause of the popularity is the fresh storyline as well as the sophisticated visual effects and good-looking actors. The agony of the protagonist was connected with the people outside the movie who are yearning for the ideal world. He was confused at the fact that his circumstances which were believed as the real world were not tortally true, complicated between the sensually phisical truth and the spiritual truth and had an will for the freedom that would ransack the truth and save the other people from the fictitious world. Consequently, the movie has got sympathies with many audiences suggesting the situation that has no a firm belief of the reality, the difference between the real and the cyber world is meaningless and the faked images of the high-technology are overturned This thesis tries to study the present that the real images are excessly duplicated and consumed, related to the Jean Baudrillard's theory, 'Hyperreel'. Replaced the real objects by a technical programming in the Matrix world, there happens the image-violence that the true nature is slaughterred by images. In the world where the reproducts are more actual than the reality and pretends to be real, only semiotics are consumed and produced. That is to say, the tortally programmed images has no references and aims, therefore should be produced in an 'impediment-strategy' like a faked crisis. That is the step of 'Simulation' that artificially reincarnates the real. Based upon the Baudrillard's theory, 'Simulacre', this study tries to research today's post-modern situation that the boundary of the real world and the faked copy is vague and vanishing, through the analysis of the cyber world of the movie 'Matrix'.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.4
• /
• pp.48-63
• /
• 2013

The results of the study on the space planning and landscape design of Unjoru(雲鳥樓) through the 'Jeolla Gurye Omidong Gado(全羅求禮五美洞家圖)' drawn using GyeHwa(界畵) technique are as follows. First, 'Omidong Gado' is believed to date back to the period when Unjoru(1776~1783) was established for the following reasons: (1) The founder, Yoo-IJu(柳爾?), sent the drawing for the house while he was serving as the governor of YongCheon county(龍川府史). (2) It shows the typical dwelling houses' space division and its location is in a good spot with mountain in the back and water in front(背山臨水) and there is every indication of scheme drawing. (3) Front gate was changed and remodeled to a lofty gate in 1804. Second, Nogodan & Hyeongjebong of Jiri Mountain sit at the back of Unjoru, and faces Obong mountain and Gyejok mountain. In addition, the Dongbang stream flowing to the east well illustrates the Pungsu theory of mountain in the back and water in the front. Third, the house is structured in the shape resembling the character 品, divided into 5 areas by hierarchical order in the cross line from all directions. The site, which includes the outdoor yard and the back garden, consists of 5 blocks, 6 yards and 2 gardens. Fourth, the outdoor yard with aesthetical value and anti-fire function, is an ecological garden influenced by Confucianism and Taoism with a pond (BangJiWonDo Type, 方池圓島形) at the center. Fifth, the Sarang yard(舍廊庭) is decorated with terrace garden and flower garden, and the landscaping components such as oddly shaped stone, crane, plum, pine tree, tamarisk tree and flowering plants were used to depict the ideal fairy land and centrally placed tree for metaphysical symbolism. The upper floor of Sarangchae commands distant and medium range view, as well as upwards and downwards. The natural landscape intrudes inside, and at the same time, connects with the outside. Sixth, pine forest over the northern wall and the intentionally developed low hill are one of the traditional landscaping techniques that promotes pleasant residential environment as well as the aesthetics of balanced fullness.