• Journal of Korean Society of Forest Science
• /
• v.64 no.1
• /
• pp.33-41
• /
• 1984

This study was conducted to examine the physiology of pine mushroom mycelia cultured with various media for artificial culture of pine mushroom. The results obtained were as follows: 1) Among the various media, the medium composed of honey, boiled pine mushroom and soil extract fluid, fibrous root extract fluid, dry yeast, $KH_2PO_4$ inositol, folic acid, and biotin was the best for the growth of pine mushroom mycelium. 2) The optimum temperature for germinating pine mushroom spore and for culturing pine mushroom mycelium, was $24^{\circ}C$ and the optimum pH was 4.5. 3) There was no significant difference in growth between the mycelium separated from the tissue of pine mushroom sporophore and that separated from the spore. 4) No noticeable effect was found on the growth if such salts as $ZnSO_4$, $MnSO_4$, $MgSO_4$, $CaCl_2$ and ferric citrate were added to the Hamada's medium. 5) The addition of fibrous root extract promoted the growth of pine mushroom mycelium. 6) As a carbon source of artificial media, honey was more effective than glucose. 7) The culture infiltration of Mortierlla growing often in Fairy Ring was good for the growth of mycelium compared with the control. 8) The addition of fibrous root extract, inositol, biotin, and folic acid to artificial culture media was greatly effective in growth. When the temperature was lowered $19^{\circ}C$ after mycelium has appeared, the formation of primordium was observed.

• Current Research on Agriculture and Life Sciences
• /
• v.1
• /
• pp.1-9
• /
• 1983

This study was conducted to obtain basic information on the rice anther culture. Materials used were (Inabawase X YR 2404-14-2-1) $F_1$ hybrid. Callus growth rate on various media, induction frequency of callus in spikelet and panicle, and the effect of treatment on anther and callus were evaluated. The results obtained were summarized as follows ; The growth rate of callus on N-6, M-S, P.E.agar media was 19.8, 13.1, 4.1 times respectively after 30 days inoculated, and on liquid media was 3.8, 5.1, 1.4 times, respectively. Organ differentiation on N-6, M-S, P.E.agar media was 37.5%, 12.5%, 17.5% respectively. The difference of induction frequency of callus per panicle was 0.14%-6.25% and per spikelet was 0-19.05%. Almost callus was induced 30-35 days after inoculation. Organ differentiation of induced callus was decreased by culture. Callus cultured for 13 days after induction did not make shoot. Anthers cold shocked at $8^{\circ}C$ for 5 days obtained 3.32% efficiencys of callus induction per number of anthers plated, and compared with 2.41% of no treated anthers. But anther treated at $8^{\circ}C$ for 7 days decreased 2.24%. Callus induction periods were shortened by cold treatment for about 5 days. Callus cultured on medium containing 2 mg/l of 2, 4-D showed 5% on root formation but medium containing 5 mg/l of 2, 4-D showed 30% of root formation after transfered on the medium without 2, 4-D. Callus cold shocked at $15-18^{\circ}C$ revealed poor efficiency for root formation, but 5 days treatment was good for shoot formation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.81-99
• /
• 2015

The acceleration of global warming has required better understanding of carbon cycles over local and regional areas such as the Korean peninsula. Since forests serve as a carbon sink, which stores a large amount of terrestrial carbon, there has been a demand to accurately estimate such forest carbon sequestration. In Korea, the National Forest Inventory(NFI) has been used to estimate the forest carbon stocks based on the amount of growing stocks per hectare measured at sampled location. However, as such data are based on point(i.e., plot) measurements, it is difficult to identify spatial distribution of forest carbon stocks. This study focuses on urban areas, which have limited number of NFI samples and have shown rapid land cover change, to estimate grid-based forest carbon stocks based on UNFCCC Approach 3 and Tier 3. Land cover change and forest carbon stocks were estimated using Landsat 5 TM data acquired in 1991, 1992, 2010, and 2011, high resolution airborne images, and the 3rd, 5th~6th NFI data. Machine learning techniques(i.e., random forest and support vector machines/regression) were used for land cover change classification and forest carbon stock estimation. Forest carbon stocks were estimated using reflectance, band ratios, vegetation indices, and topographical indices. Results showed that 33.23tonC/ha of carbon was sequestrated on the unchanged forest areas between 1991 and 2010, while 36.83 tonC/ha of carbon was sequestrated on the areas changed from other land-use types to forests. A total of 7.35 tonC/ha of carbon was released on the areas changed from forests to other land-use types. This study was a good chance to understand the quantitative forest carbon stock change according to the land cover change. Moreover the result of this study can contribute to the effective forest management.

• Journal of dental hygiene science
• /
• v.12 no.2
• /
• pp.131-137
• /
• 2012

The purpose of this study was to examine the sociopsychological stress of dental hygiene students, any possible gaps among them according to their general characteristics and the most influential factor for their stress. The subjects in this study were the dental hygiene students who were selected by convenience sampling from three different colleges. After a survey was conducted for about a month between March and April, 2011, the answer sheets from 561 students were analyzed. As for the sociopsychological stress of the dental hygiene students, economic stress was the heaviest sociopsychological stress that the students suffered(3.17). Regarding differences in each stressor according to general characteristics, they were more stressed out about their economy, families, interpersonal relationships and studies when they had a less conversation with their families. And they had more stress about their economy, families, interpersonal relationships and studies when they found themselves to be more unhealthy. The gaps between them and the others were statistically significant. As a result of analyzing the influential factors for their stress, they had more stress when they had a less conversation with their families(p<0.001) and when they found themselves not to be in good health(p<0.001). It's required to seek ways for dental hygiene students to cope with their stress properly, and the development of stress management programs is necessary. Besides, education and training should be provided for them to regulate their own stress successfully.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.23-29
• /
• 2017

The packaged optical fiber Bragg grating sensors which were networked by multiplexing the Bragg grating sensors with WDM technology were investigated in application for the structural health monitoring of the marine trestle structure transporting the ship. The optical fiber Bragg grating sensor was packaged in a cylindrical shape made of aluminum tubes. Furthermore, after the packaged optical fiber sensor was inserted in polymeric tube, the epoxy was filled inside the tube so that the sensor has resistance and durability against sea water. The packaged optical fiber sensor component was investigated under 0.2 MPa of hydraulic pressure and was found to be robust. The number and location of Bragg gratings attached at the trestle were determined where the trestle was subject to high displacement obtained by the finite element simulation. Strain of the part in the trestle being subjected to the maximum load was analyzed to be ${\sim}1000{\mu}{\varepsilon}$ and thus shift in Bragg wavelength of the sensor caused by the maximum load of the trestle was found to be ~1,200 pm. According to results of the finite element analysis, the Bragg wavelength spacings of the sensors were determined to have 3~5 nm without overlapping of grating wavelengths between sensors when the trestle was under loads and thus 50 of the grating sensors with each module consisting of 5 sensors could be networked within 150 nm optical window at 1550 nm wavelength of the Bragg wavelength interrogator. Shifts in Bragg wavelength of the 5 packaged optical fiber sensors attached at the mock trestle unit were well interrogated by the grating interrogator which used the optical fiber loop mirror, and the maximum strain rate was measured to be about $235.650{\mu}{\varepsilon}$. The modelling result of the sensor packaging and networking was in good agreements with experimental result each other.

• Journal of agricultural medicine and community health
• /
• v.20 no.2
• /
• pp.157-168
• /
• 1995

This study was carried out, through analyzing the annual reports(year of 1973-1993) on health status of Su Dong-Myun, and specific survey data of 332 households(Su Dong-Myun 209, Byul Nae-Myun 123), located in Nam Yang Ju-Si, Kyung Gi-Do, from July 20 to July 31, 1995, to find out more effective means for primary medical care in a rural area. The results were as fellows : 1. Number of population in Su Dong-Myun was 5,419 in 1973, 4,591(the lowest) in 1987 and 5,707 in 1995. In the composition rate of population, "0-14" of age group showed markedly decreasing tendency from 43.1% in 1975, to 19.1% in 1995, however "65 and over" markedly in creasing tendency form 5.3% in 1975 to 9.8% in 1995. 2. Annual utilization rate per 1,000 inhabitants in Su Dong-Myun showed markedly increasing tendency from 1973 to 1977 such as 343 in 1973, 540 in 1975, 900 in 1977. However, since 1979, the rate showed rapidly decreasing tendency, such as 846 in 1979, 519 in 1985, 190 in 1991 and 1993. 3. The morbid household rate per year was 53.6% of respondents and the rate per 15 days was 48.2%. In disease classification rate of morbid household per year, Arthralgia & Neuralgia was the highest rate(33.9%) and gastro-intestinal disorder(19.3%), Cough(11,9%), Hypertension(7.8%), Accident(3.2%) in next order. 4. In the utilizing facilities for Primary Medical Care, Medical facilities was showed the highest rate(58.1% of respondents) and Pharmacy and Drug Shp(33.1%), Tradition Method(4.0%) in next order. In the Medical facilities, General private clinic was showed the highest rate(34.3%) and specific private Clinic(22.3%), Hospital(19.0%), Health (Sub)center(16.3%), Nurse practitioner (3.3%), Oriental hospital and clinic(2.7%) in next order. 5. Experience rate, utilizing health subcenter was 51.8% of the respondents, and it was 55.0% in Su Dong-Myun and 46.3% in Byul Nae-Myun. In utilization times of health subcenter, times-rate showed next orders such as 1-2 times/6months(31.6%), 1-2 times/year (22.1%), 1-2 times/months(19.2%), 1-2 times/3months(15.6%). 6. In objectives, visiting Health Subcenter, Medical Care was the highest rate(59.8% of the respondents) and health control(23.3%) was in next order. In Medical Care, Primary Care by general physician was higher rate(51.1%) almost all. In the Health control, Immunization too was high rate(18.0%) in health control activities. 7. The reasons rate, utilizing health subcenter showed next order, such as distance to Medical facilities(33.0% of the respondents), Medical Cost(28.1%), Simple process of consultation (10.8%), Effectiveness of cure(7.6%), Function of primary medical care(7.0%) and Attitude of physician(6.5%). 8. In the affecting factors to utilization of primary medical facilities, medical needs was showed the highest rate(29.5% of the respondents) and medical cost(15.4%), distance to medical facilities(14.2%), traffic vehicle(14.2%) and farm work(6.9%) in next order. 9. In the priority between 'daily farm work,' and 'primary medical care', only 46.4% of respondents answered that primary health care is more important than the daily farm work The 22.6% of respondents answered 'daily farm work', and the 12.3% answered 'the equal of the both'. 10. In the criterion of medical facilities choice, medical knowledge and technical quality was showed the highest rate(56.3%), distance or time to medical facilities(10.9%), sincerity and kindness of physician(9.4%), medical cost(8.7%) and traffic vehicle(6.5%) in next order 11. In the advise for improvement of health subcenter function, the 36.1% of respondents answered that 'enforcement of medical personnel and equipment' was required, and then 'improved medical technology'(25.5%), 'good attitude of physician'(14.9%), 'improved medical system'(13.3%), 'enforced drug'(6.7%) in next order. 12. The study on affecting factors to utilization of primary medical facilities was very difficult subject to systematize the analyzed results, due to a prejudice of protocol planner, surveyer and respondent, and variety and overlapping of subject matter.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.3
• /
• pp.154-160
• /
• 2017

BACKGROUND:This study was carried out to establish an efficient sample preparation for the simultaneous determination of bisphenols (BPs) in river water samples using gas chromatography-mass spectrometry (GC-MS). Sample preparation was examined with conventional extraction methods, such as solid-phase extraction (SPE) and liquid-liquid extraction (LLE), and their efficiency was compared with validation results, including linearity of calibration curve, method detection limit (MDL), limit of quantification (LOQ), accuracy, and precision. METHODS AND RESULTS:The BPs (bisphenol A, BPA; bisphenol B, BPB; bisphenol C, BPC; bisphenol E, BPE; bisphenol F, BPF; bisphenol S, BPS) were analyzed using GC-MS. The range of MDLs by SPE and LLE methods was $0.0005{\sim}0.0234{\mu}g/L$ and $0.0037{\sim}0.2034{\mu}g/L$, and that of LOQs was $0.0015{\sim}0.0744{\mu}g/L$ and $0.0117{\sim}0.6477{\mu}g/L$, respectively. The calibration curve obtained from standard solution of $0.004{\sim}4.0{\mu}g/L$ (SPE) and $0.016{\sim}16{\mu}g/L$ (LLE) showed good linearity with $r^2$ value of 0.9969 over. Accuracy was 93.2~108% and 97.4~120%, and precision was 1.7~4.6% and 0.7~6.5%, respectively. The values of MDL and LOQ resulted from the SPE method were higher than those from the LLE method, particularly those values of BPA were highest among the BPs. Based on the results, the SPE method was applied to determine the BPs in river water samples. Water samples were collected from mainstream, tributary and sewage wastewater treatment plants (SWTPs) in the Yeongsan river basin. The concentration of BPB, BPC, BPE, BPF and BPS were not detected in all sites, whereas BPA was ranged $0.0095{\sim}0.2583{\mu}g/L$, which was $0.0166{\sim}0.0810{\mu}g/L$ for mainstreams, $0.0095{\sim}0.2583{\mu}g/L$ for tributaries, $0.0352{\sim}0.1217{\mu}g/L$ for SWTPs. CONCLUSION: From these results, the SPE method was very effective for the simultaneous determination of BPs in river water samples using GC-MS. We provided that it is a convenient, reliable and sensitive method enough to monitor and understand the fate of the BPs in aquatic ecosystems.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.4
• /
• pp.463-469
• /
• 2014

Sorghum has been consumed as one of the important staple food in the semiarid tropics of Africa and Asia. Sorghum is rich in starch, protein, essential vitamins and minerals and grows relatively well in dry climate regions when it compared with other staple food crops. Sorghum has taken an increased interest due to several studies that report about the beneficial effects of sorghum on human health. In the present study, we investigated the antioxidative and activity of extract of milling by-products (hull and bran) of Korean sorghum cultivar, 'Hwanggeaumchal' as well as its grain. Hull extract showed the highest total polyphenol contents ($29.7{\pm}0.2mg\;GAE/100g$) and major four pigments content ($322.6{\pm}14.5mg/100g$). From results of 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonate (ABTS) radical scavenging activity, hull extract ($IC_{50}$, $6.3{\pm}0.1{\mu}g/mL$) was also showed the strongest antioxidative effects. Bran and grain showed similar polyphenol, pigments contents and antioxidative effects. We determined cell viability by MTT assay and evaluated the anti-inflammatory activity by measuring nitric oxide (NO) of hull, bran and grain methanol extract (0.5% HCl v/v) on RAW 264.7 cells. Hull extract treatment was significantly decreased NO production with dose-dependant manner. Apigeninidin as one of the major pigment of hull was showed inhibitory activity against NO production without cytotoxicitiy. Therefore, sorghum milling by-products can be used as a good source of antioxidative and anti-inflammatory agents.

• Journal of dental hygiene science
• /
• v.7 no.4
• /
• pp.213-218
• /
• 2007

The purpose of this study was to analyze the effects of dentistry users' perception of concern about oral health on their perception of oral health and behaviors. For this purpose, the researcher sampled the outpatients who had used 2 dentistries in Kangnam, Seoul and another 2 dentistries in Kangbuk, Seoul and a hospital attached to a dental college in Bundang, Kyonggi-do and thereby, conducted a self-administered questionnaire survey from April 4 through 28, 2006. 291 responses from the survey were analyzed using the SPSS 12.0 statistical program. The results of this study can be summarized as follows; 1. 45.0% of the patients perceived that their oral conditions were not healthy, 32% thought normal for their oral conditions and 23% felt healthy for their oral conditions. 2. Less women (44.1%) felt healthy for their oral conditions than men (46.3%). 3. The more negative patients' perception of their oral health was, they were more likely (55.1%) to rely on relatives for choice of a dentistry. 45.0% of this group worried about their oral health always, 15.1% were more or less worried, and 11.9% of them felt that their oral health was good(P < 0.05). 4. 66.0% of the subjects worried about their oral health sometimes, and 27.8% of them worried always, and 6.2% worried little. There was no significant gender difference, but the older they were, they worried more always(P < 0.05). 5. 93.8% of the group who worried about their oral health always had ever had their teeth scaled, and 65.8% of them had regularly had their teeth scaled. Such ratios differed significantly from the group who worried about their oral health sometimes (49.7% and 46.2%, respectively). The three groups differed in terms of regular checks significantly: 56.6%, 45.3% and 33.3%, respectively. And the rate of visiting the dentistry without fail was significantly highest (71.6%) in the first group (P < 0.05).

• Journal of Intelligence and Information Systems
• /
• v.23 no.1
• /
• pp.127-141
• /
• 2017

Advances in Internet technologies and the proliferation of mobile devices enabled consumers to approach a wide range of goods and services, while causing an adverse effect that they have hard time reaching their congenial items even if they devote much time to searching for them. Accordingly, businesses are using the recommender systems to provide tools for consumers to find the desired items more easily. Association Rule Mining (ARM) technology is advantageous to recommender systems in that ARM provides intuitive form of a rule with interestingness measures (support, confidence, and lift) describing the relationship between items. Given an item, its relevant items can be distinguished with the help of the measures that show the strength of relationship between items. Based on the strength, the most pertinent items can be chosen among other items and exposed to a given item's web page. However, the diversity of the measures may confuse which items are more recommendable. Given two rules, for example, one rule's support and confidence may not be concurrently superior to the other rule's. Such discrepancy of the measures in distinguishing one rule's superiority from other rules may cause difficulty in selecting proper items for recommendation. In addition, in an online environment where a web page or mobile screen can provide a limited number of recommendations that attract consumer interest, the prudent selection of items to be included in the list of recommendations is very important. The exposure of items of little interest may lead consumers to ignore the recommendations. Then, such consumers will possibly not pay attention to other forms of marketing activities. Therefore, the measures should be aligned with the probability of consumer's acceptance of recommendations. For this reason, this study proposes a model-based approach to combine those measures into one unified measure that can consistently determine the ranking of recommended items. A regression model was designed to describe how well the measures (independent variables; i.e., support, confidence, and lift) explain consumer's acceptance of recommendations (dependent variables, hit rate of recommended items). The model is intuitive to understand and easy to use in that the equation consists of the commonly used measures for ARM and can be used in the estimation of hit rates. The experiment using transaction data from one of the Korea's largest online shopping malls was conducted to show that the proposed model can improve the hit rates of recommendations. From the top of the list to 13th place, recommended items in the higher rakings from the proposed model show the higher hit rates than those from the competitive model's. The result shows that the proposed model's performance is superior to the competitive model's in online recommendation environment. In a web page, consumers are provided around ten recommendations with which the proposed model outperforms. Moreover, a mobile device cannot expose many items simultaneously due to its limited screen size. Therefore, the result shows that the newly devised recommendation technique is suitable for the mobile recommender systems. While this study has been conducted to cover the cross-selling in online shopping malls that handle merchandise, the proposed method can be expected to be applied in various situations under which association rules apply. For example, this model can be applied to medical diagnostic systems that predict candidate diseases from a patient's symptoms. To increase the efficiency of the model, additional variables will need to be considered for the elaboration of the model in future studies. For example, price can be a good candidate for an explanatory variable because it has a major impact on consumer purchase decisions. If the prices of recommended items are much higher than the items in which a consumer is interested, the consumer may hesitate to accept the recommendations.