• Journal of Pharmaceutical Investigation
• /
• 제26권2호
• /
• pp.99-103
• /
• 1996

Effects of glycerin and PEG 400 in donor and receptor solutions upon skin permeation of drug were investigated. Deoxycortisone was used as a model compound. In vitro skin permeation study with freshly excised hairless mouse skin was performed and the steady-state skin permeation rates of the drug were determined in different fractions of glycerin or PEG 400 in donor and receptor solutions. Glycerin in donor solution didn't show any effect on the skin permeation rate of deoxycortisone. However glycerin in receptor solution showed significant effect on the skin permeation rate of the drug. In glycerin, there's a critical concentration for balancing hydration and dehydration of skin. At low concentration, less than 20 %, glycerin showed the enhancement of the flux due to the hydration effect of skin. At high concentration, more than 30 %, glycerin retard the permeation rate which might be due to the dehydration effect on the dermis layer. Since dermis has more water content than the stratum corneum, the steady state skin permeation rates were more influenced when glycerin was in receptor solution than that of in donor solution. PEG 400 aqueous solutions doesn't affect the steady state permeation rate of deoxycortisone significantly.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.367-370
• /
• 2003

In this study the effects of fluid viscosity on the pump performances of a conventional centrifugal pump were experimentally studied. The study aimed to compare the pump characteristics for water and high viscosity fluids. The Working fluids are water, aqueous sugar solution and glycerin solution. The pump characteristics of total head and efficiency with high viscosity fluids were different. The performance curves of efficiency for the sugar and glycerin solutions were decreased up to 8.1% and 12.9% than that of water.

• 한국분무공학회지
• /
• 제14권3호
• /
• pp.131-138
• /
• 2009

In the present study, spread-recoil behavior of a drop of shear-thinning liquid (xanthan solution) on a dry wall (polished stainless-steel plate) was examined and compared with that of Newtonian liquid (glycerin solution). Nine different kinds of xanthan and glycerin solutions were tested, including three pairs of xanthan and glycerin solutions, each having the same viscosity in low shear rate region ($10^{-2}-10^0\;l/s$). The drop behavior was visualized and recorded using a CCD camera. The maximum diameter and the spreading velocity of the xanthan drops turned out to be significantly larger and the time to reach their final shape was much shorter compared to the cases with the glycerin solutions, due to the smaller viscous dissipation resulted from lower viscosity in the higher shear rate region (>$10^0\;l/s$). As a result, the maximum diameters were measured to be larger than the predicted values based on the model proposed for Newtonian liquids, and the deviation was more pronounced with the solution with the larger viscosity variation. Consequently, viscosity variation with the shear rate was found to be a dominant factor governing the spread-recoil behavior of shear-thinning drops.

• 폴리머
• /
• 제26권6호
• /
• pp.792-802
• /
• 2002

본 연구에서는, 방사선($^{60}$Co ${\gamma}$-rays) 가교를 이용하여 poly(vinyl alcohol)(PVA)/poly(N-vinylpyrrolidone)(PYP)/글리세린/키토산의 혼합물로부터 하이드로겔을 제조하였다 하이드로겔이 상처 치료용 드레싱으로 사용될 수 있는지 예측하기 위해 겔화율, 팽윤도, 겔강도 같은 기계적 성질을 측정하였다. PVV와 PVP의 조성비는 6 : 4, 키토산은 0.3 wt%, 글리세린은 0~5 wt%, PVA/PVP/글리세린/키토산 수용액의 고형분의 농도는 15 wt%이었다. 하이드로겔의 기계적 성질에 조사선량이 미치는 영향을 예측하기 위해 PVA/PVP/글리세린/키토산 혼합물에 25~60 kGy의 감마선을 조사하였다. 겔화율과 겔강도는 글리세린 조성비가 작을수록 조사선량이 커질수록 증가하였다. 팽윤도는 글리세린 조성비가 클수록, 조사선량이 작을수록 증가하였다. PVA/PVP/글리세린/키토산 하이드로겔에서 글리세린은 겔 모양의 변형을 막는다. 제조된 하이드로겔이 상업용 바셀린 거즈보다 치료 효과가 우수하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.57-62
• /
• 2004

In the current study the effects on pump performances of a conventional centrifugal pump for Newtonian and non-Newtonian fluid were experimentally studied. The study aimed to compare the pump characteristics for Newtonian and non-Newtonian fluid. The working fluids are water, aqueous sugar solution, glycerin solution, muddy solution and pulp solution. The pump characteristics with high viscosity fluids were different. The operating efficiency for the sugar and glycerin solutions were decreased to $8.1\%$ and $12.9\%$ than that of water. The head reductions of the muddy solution for different concentration ratios were decreased to $7.97\%,\;15.11\%$ and $24.87\%$ than that of water And the head reductions of the pulp solution for different concentration ratios were decreased to $11.87\%,\;19.79\%$ md $36.81\%$ than that of water.

• 한방재활의학과학회지
• /
• 제23권2호
• /
• pp.185-191
• /
• 2013

본 증례에서는 절식치료 중인 환자에 있어 글리세린 관장을 실시한 직후 발생한 허혈성 대장염 1례에 대해 고찰하여, 관장으로 인한 장관 내압 상승, 상온의 체온보다 낮은 관장액으로 인한 혈관 경련, 선택적 세로토닌 재흡수 억제제에 의한 출혈 경향 증가 및 글리세린 용액의 화학적 삼투작용으로 인한 점막 손상 가능성 등을 제시하였다. 관장으로 인한 이와 같은 부작용을 예방하기 위하여 임상의들의 주의가 요구된다.

• 분석과학
• /
• 제20권5호
• /
• pp.400-405
• /
• 2007

액체크로마토그래피/질량분석법(LC/MS) 및 핵자기공명분광분석법 $^1H(NMR)$을 이용하여 화장품에 들어있는 글리세린을 동시 비교분석하였다. 화장품 시료를 물에 용해시키고 수산화나트륨을 첨가하여 시료용액을 강알칼리 상태로 유지시킨 후, 시료용액 중의 글리세린을 benzoyl chloride로 유도체화 반응 시키고 유도체화된 글리세린을 pentane으로 추출하여 LC/MS로 정량분석 하였다. $^1H$ NMR 분석은 시료를 전처리 없이 $D_2O$ 용매에 직접 용해시키고, 글리세린을 ERETIC(Electronic REference To access In vivo Concentrations) 방법을 이용하여 $^1H$ NMR로 직접 정량분석 하였다. LC/MS 및 NMR 분석결과 LC/MS의 검량선은 $0.1-10{\mu}g/mL$ 농도범위에서 $r^2=0.9991$ 이었고 $^1H$ NMR의 검량선은 $25-500{\mu}g/mL$ 농도범위에서 $r^2=1$의 상관계수를 갖는 좋은 직선성을 얻었다.

• 한국유체기계학회 논문집
• /
• 제7권2호
• /
• pp.21-26
• /
• 2004

In this study the effects of fluid viscosity on the pump performances for a conventional centrifugal pump were experimentally investigated. The study aimed to compare the pump characteristics between water and viscosity fluids. In order to measure the flow rate and pressure, v-notch welt and bourdon pressure gauges were used for the codes of KS B6301 and KS B6302. The working fluids were water, aqueous sugar and glycerin solutions. The results were summarized as follows : The experimental results were summarized as follows : the pump characteristics of the total head, shaft power, and efficiency with high viscosity fluids were different from those of water. When the viscosity of the applied fluid was increased, the total head and efficiency were more decreased than those of water. The decreasing gradients of the total head and the efficiency were larger than water due to the increased disk friction losses at the duty operation point. However, the shut-off head was almost constant regardless the viscosity of applied fluids. Each efficiency curves for the sugar $20w\%$ and glycerin $20w\%$ solutions was decreased up to $15.1\%$ and $34.4\%$ than that of water, respectively.

• 한국응용과학기술학회지
• /
• 제26권1호
• /
• pp.1-9
• /
• 2009

Nowadays, Tra catfish fat is given attention as an appropriate material for biodiesel production in Vietnam. The aim of this work is to investigate the optimal conditions of refining biodiesel and recovering glycerin by the transesterification from Tra catfish fat using KOH catalyst. As our results, the yield of transesterification was achieved to 94.17% at $50^{\circ}C$ for 45 min with 6:1 molar ratio of methanol to fat in the presence of 0.8% KOH catalyst, and wherein the biodiesel was refined by washing with distilled water at $70^{\circ}C$ and dried in a microwave oven. The yield of raw glycerin recoveries from the transesterification process was 78.58%. The purity of raw glycerin was 84.14% by the conditions of neutralization state with $H_{3}PO_{4}$ solution (pH = 5), $70^{\circ}C$, and 60 min. Activated carbon (3.0 wt.%) was used for the bleaching process at $80^{\circ}C$ for 20 min. The biodiesel was obtained in accordance with for ASTM D 6751 (biodiesel standard). The ash and water of raw glycerins were 7.32 and 8.01%, respectively, and implied that the raw glycerin is very promising candidate to be used as a raw material for textile and cosmetic industries.

• Membrane and Water Treatment
• /
• 제13권4호
• /
• pp.191-199
• /
• 2022

In industrial production, the development of traditional polyamide nanofiltration (NF) membrane was limited due to its poor oxidation resistance, complex preparation process and high cost. In this study, a composite NF membrane with high flux, high separation performance, high oxidation resistance and simple process preparation was prepared by the method of dilute solution dip coating. And the sulfonated polysulfone was used for dip coating. The results indicated that the concentration of glycerin, the pore size of the based membrane, the composition of the coating solution, and the post-treatment process had important effects on the structure and performance of the composite NF membrane. The composite NF membrane prepared without glycerol protecting based membrane had a low flux, when the concentration of glycerin increased from 5% to 15%, the pure water flux of the composite NF membrane increased from 46.4 LMH to 108.2 LMH, and the salt rejection rate did not change much. By optimizing the coating system, the rejection rate of Na₂SO₄ and PEG1000 was higher than 90%, the pure water flux was higher than 40 LMH (60psi), and it can withstand 20,000 ppm.h NaClO solution cleaning. When the post treatment processes was adjusted, the salt rejection rate of NaCl solution (250 ppm) reached 45.5%, and the flux reached 62.2 LMH.