• Korea-Australia Rheology Journal
• /
• v.13 no.3
• /
• pp.141-148
• /
• 2001

In this research, experimental studies leave been performed on the hydrodynamic interaction between a spherical particle and a plane wall by measuring the force between the particle and wall. To approach the system as a resistance problem, a servo-driving system was set-up by assembling a microstepping motor, a ball screw and a linear motion guide for the particle motion. Glycerin and dilute solution of polyacrylamide in glycerin were used as Newtonian and non-Newtonian fluids, respectively. The polymer solution behaves like a Boger fluid when the concentration is 1,000 ppm or less. The experimental results were compared with the asymptotic solution of Stokes equation. The result shows that fluid inertia plays all important role in the particle-wall interaction in Newtonian fluid. This implies that the motion of two particles in suspension is not reversible even in Newtonian fluid. In non-Newtonian fluid, normal stress difference and viscoelasticity play important roles as expected. In the dilute solution weak shear thinning and the migration of polymer molecules in the inhomogeneous flow field also affect the physic of the problem.

• Korean Journal of Agricultural Science
• /
• v.27 no.1
• /
• pp.54-62
• /
• 2000

This study was performed to evaluate the food technological properties according to different emulsion state of carthamus red pigment. For making emulsion, lecithin was used as an emulsifier and polyglycerol monooleate(PGMO) and polyoxyethylene sorbitan monooleate(Tween 80) were used as an assistant, and glycerin, distilled water and soybean oil were used as base materials respectively. Paprika stock solution was used for comparing carthamin on the rheological properties. The results were described as following: 1. Hunter L-value was not drastically increased until passed by 8 hours for glycerin, carthamin, and lecithin mixed sample. 2. Hunter a-value was higher at carthamin added sample than others. and b-value was higher to paprika added sample than others. 3. The viscosity, shear rate and shear stress levels in which glycerin was used as base material were higher than soybean oil or distilled water. 4. In which soybean oil was used as base material. lecithin was not affected on the rheological properties. But, in which glycerin was used. the lecithin was higher affected on carthamin than paprika. 5. The value of shear stress was increased both carthamin and soybean oil. However, that of shear rate was shown similar trends.

• YAKHAK HOEJI
• /
• v.50 no.1
• /
• pp.1-7
• /
• 2006

The purpose of the present study was to formulate the aqueous solution of 1-cyclopent-3-enylmethyl-6(3,5-dimethyl-benzoyl)-5-ethyl-1H-pyrimidine-2,4-dione (CPD), a novel antivirus compound containing pirimidine structure. For this purpose, the effects of various solubilization agents such as cosolvents [ethanol, propylene glycol (PG), polyethylene glycol 300 (PEG 300), polyethylene glycol 400 (PEG 400), glycerin], surfactants (Tween 80, Cremophor$^{(R)}$ RH40, Cremophor$^{(R)}$ EL, Poloxamer 407, Poloxamer 188) and a complexation agent [hydroxypropyl-${\beta}$-cyclodextrin (HPBCD)] , on the solubility of CPD in aqueous solution were evaluated. The solubility of CPD in water was under $1\;{\mu}g/ml$ at $20^{\circ}C$. Cosolvents such as ethanol, PG, PEG 300, PEG 400 and glycerin did not enhance the solubility of CPD at the $0{\sim}40\%$ concentration range. The solubility of CPD was significantly elevated by the addition of cosolvents over the $80\%$ concentration range. On the other hand, tween 80, Cremophor$^{(R)}$ L, Cremophor$^{(R)}$ RH40, and HPBCD showed enhanced effects on the solubility of CPD. The enhanced effects of Poloxamer 407 or Poloxamer 188 on the CPD solubility were less pronounced compared with tween 80, Cremophor$^{(R)}$ L or Cremophor$^{(R)}$ RH40. As a results, tween 80 aqueous solution was selected as an optimum solvent system. The aqueous solutions containing $20\%$ tween 80 were formulated as a dosing solution containing CPD for its intraperitoneal and intrahypodermic administration, respectively, The formular showed physical stability after stored for 7 days at $4^{\circ}C$.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.5
• /
• pp.385-391
• /
• 2004

The purpose of the present study was to formulate the aqueous solution of $20-O-{\beta}-D-glucopyranosyl-20(S)-protopanaxadiol\;(IH-901)$, an intestinal bacterial metabolic derivative from Ginseng protopanaxadiol saponin. For this purpose, the effects of various solubilization agents such as cosolvents [ethanol, propylene glycol (PG), polyethylene glycol 300 (PEG 300), polyethylene glycol 400 (PEG 400), glycerin], surfactants $(Tween\;80,\;Cremophor^{\circledR}\;RH40,\;Cremophor^{\circledR}\;EL,\;Poloxamer\;407,\;Poloxamer\;188)$ and a complexation agent $[hydroxypropyl-{\beta}-cyclodextrin\;(HPBCD)]$, on the solubility of IH-90l in aqueous solution were evaluated. The solubility of IH-901 in water was under $1\;{\mu}g/ml\;at\;20^{\circ}C$. Cosolvents such as ethanol, PG, PEG 300, PEG 400 and glycerin did not enhance the solubility of IH-901 at the 0 - 40% concentration range. The solubility of IH-901 was significantly elevated by the addition of cosolvents over the 80% concentration range. On the other hand, tween 80, $Cremophor^{\circledR}\;EL,\;Cremophor^{\circledR}\;RH40$ and HPBCD showed enhanced effects on the solubility of IH-901. The enhanced effects of Poloxamer 407 or Poloxamer 188 on the IH-901 solubility were less pronounced compared with $Cremophor^{\circledR}\;EL\;or\;Cremophor^{\circledR}\;RH40$. As a results, $Cremophor^{\circledR}$ aqueous solution was selected as an optimum solvent system. The aqueous solutions containing 10% $Cremophor^{\circledR}\;EL$ and 7% $Cremophor^{\circledR}\;RH40$ were formulated as dosing solutions containing 5.0 mg/ml of IH-901 for its intravenous and oral administration, respectively. The formular showed physical stability after stored for 7 days at $4^{\circ}C$.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.4
• /
• pp.279-286
• /
• 1997

In order to formulate 2% ibuprofen solution, the effects of various solublizing agents, such as cosolvents (propylene glycol, polyethylene glycol, glycerin), a complexing agent $(CELDEX{\circledR}\;CH20)$, surfactants $(Poloxamers\;and\;Cremophor{\circledR}\;RH40)$ on the solubility of ibuprofen in aqueous solution were evaluated. Among them, Poloxamer 407 and $Cremophor{\circledR}$ RH40 showed the excellent capacity on the solubilization of ibuprofen. After 2% ibuprofen solution of choice were administered orally to rats, in reference to a 2% ibuprofen syrup in the market, the pharmacokinetic parameters were determined. The absorption rate of ibuprofen from the solution was higher than that from the suspension.

• Journal of Conservation Science
• /
• v.21
• /
• pp.49-58
• /
• 2007

Among the treatment results of test samples of the antique lacquer-ware, the treatment with PEG#3,350 40% solution displayed excellent effect with low shrinkage ratio; in weight gain the treatment with Sucrose 19%+Glycerin 1%(t-butanol 5% in water) solution showed consistent increase. However during the impregnation process of Sucrose, the weight of the testing samples decreased by dehydration because the inner part of the test samples and the treatment solution showed concentration gradient. Therefore, we concluded longer impregnation period should be necessary to prevent dehydration. Since both higher and lower molecular weight treatment chemicals could penetrate into the wood of the lacquer-ware, air drying and conditioning after impregnation treatment with high concentration chemicals would be possible, as well as vacuum freeze-drying.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.442-449
• /
• 2010

Polyurethane(PU) prepolymer was synthesized from ethylene oxide/propylene oxide(EO/PO) random polyether polyol, toluene diisocyanate and chain extender such as ethylene glycol and 1,4-butanediol. PU foams having various compositions were fabricated from PU prepolymers with different hard segment contents(%) and mixed foaming solution of different compositions. PU foam from chain extender-introduced PU prepolymer and mixed foaming solution containing glycerin showed better mechanical property than other groups. Various PU foams were tested on their mechanical property, moisture vapor transmission rate, absorption speed, absorptivity, morphology and cell culture test. According to the test, the PU foam fabricated from chain extender-introduced PU prepolymer and mixed foaming solution containing optimum composition of F-68, glycerin and CMC was found to have the best property for wound dressing materials. From in vivo animal study, it was confirmed that above PU foam showed rapid wound recovery.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.8-13
• /
• 2012

The experiments have been performed to obtain zinc complex compound with smaller particle size, which is used as a charge control agent in manufacturing toner. Metallic salts and polyhydric alcohols have been studied to investigate their effects on the formation of different sizes of zinc complex-compound particle. Reactants such as zinc chloride and 3,5-di-tert-butyl salicylic acid have been used to form the complex compound. Polyethylene glycol (PEG-300), glycerin and ethylene glycol have been added into the zinc chloride solution beforehand to lower the reaction rate in the formation of zinc complex-compound. Zirconium (IV) oxychloride octahydrate has been mixed in the zinc chloride solution beforehand to restrain crystals from growing. When PEG-300 and zirconium (IV) oxychloride octahydrate are used to lower the reaction rate and to restrain the particle size from growing, the average particle size of zinc complex compound decreases from 5.28 to 1.84 ${\mu}m$, which is 34.9% of 5.28 ${\mu}m$.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.431-437
• /
• 2011

Transparent liquid crystal gels with high oil content by fatty acid soap were investigated. The solubilization efficiency of the mineral oil was dependent on the process. The process of dropping water part into the solution of oil and surfactant was more efficient than the process of dropping water part into the surfactant solution and after that dropping oil. The fatty acid soap could not solubilize the high oil content, but under the certain range, addition of CDE (Coconut Diethanolamide), Arlacel 165 (Glyceryl Stearate/PEG-100 Stearate) and cetostearyl alcohol helped solubilize the high content oil. Also, the glycerin and water content had influence on the solubilization. Especially, higher oil content gel showed elastic feature.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.4
• /
• pp.422-427
• /
• 2009

We have investigated the effects of polyols and NaCl on the rheological behaviours of surfactant mixtures. Sodium lauryl ether sulfate (SLES), cocamidopropyl betaine (CAPB), disodium cocoamphodiacetate (DSCA), cocamide DEA (CDEA) and lauroyl/myristoyl DEA (LMDE) were used as surfactants. The polyols added into the surfactant mixture were 1,3-butylene glycol, propylene glycol, glycerin, sorbitol, dipropylene glycol, PEG 1500 and PEG 400. The addition of amphoteric surfactant to SLES aqueous solution lead to increase the height of foam and the viscosity of the system. The addition of nonionic surfactant, LMDE or CDEA to the SLES aqueous solution increased the viscosity and the effect of LMDE was better than that of CDEA. The effect of adding polyols and NaCl into the surfactant mixture aqueous solution lead to increase or decrease the viscosity of the systems depending on the concentration of NaCl and the kinds of polyols. These results can be explained through the salting in or salting out of surfactant of the systems.