• Journal of Korean Neurosurgical Society
• /
• v.66 no.2
• /
• pp.199-204
• /
• 2023

It is critical to identify the ruptured cerebral arteriovenous malformations (AVMs) for secondary prevention. However, there are rare cases unidentified on the radiological evaluation. We report on a patient with the delayed appearance of radiologically occult AVM as a probable cause of the previous intracerebral hemorrhage (ICH). An 18-year-old male patient presented with a right temporal ICH. The preoperative radiological examination did not reveal any causative lesions. Because of the intraoperative findings suggesting an AVM, however, only hematoma was evacuated. Disappointedly, there were no abnormal findings on postoperative and follow-up radiographic examinations. Eleven years later, the patient presented with an epileptic seizure, and an AVM was identified in the right temporal lobe where ICH had occurred before. The patient underwent partial glue embolization followed by total surgical resection of the AVM and anterior temporal lobe. Based on the literature review published in the era of magnetic resonance imaging, common clinical presentation of radiologically occult AVMs included headache and seizure. Most of them were confirmed by pathologic examination after surgery. In cases of the ICH of unknown etiology in young patients, long-term follow-up should be considered.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.2
• /
• pp.81-97
• /
• 2023

The aim of this study were to evaluate tannin resorcinol formaldehyde (TRF) for the preparation of cross-laminated timbers (CLTs) made from fast-growing tree species and to analyze the physical and mechanical properties of CLTs. TRF copolymer resin was prepared by using the bark extracts of Swietenia mahagoni (L.) Jacq. It was observed that the TRF adhesive possessed less solid content (23.59%), high viscosity (11.35 poise), and high pH values (10.0) compared to the standard phenol resorcinol formaldehyde. The TRF adhesive was applied to produce CLTs with the addition of 15% tapioca and flour as an extender. The six-layered CLTs were produced from sengon (Falcataria moluccana Miq.), jabon [Anthocephalus cadamba (Roxb) Miq.], coconut (Cocos nucifera L.), and the combination of coconut-jabon and coconut-sengon wood. The analysis of variance revealed that the layer composition of CLT significantly affected the physical and mechanical properties of the beam. While the modulus of rupture met the standard, the moisture content and modulus of elasticity values did not fulfill JAS 1152-2007. All of the CLTs produced in this study demonstrated low formaldehyde emission, ranging from 0.001 mg/L to 0.003 mg/L, thereby satisfying the JAS 1152 for structural glue laminated timber.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.1
• /
• pp.219-228
• /
• 2022

High-profile corporate crises have sparked a surge in interest in corporate governance (CG) and corporate reputation (CR). Company governance issues in many companies contribute to corporate failures and a bad reputation. Transparency is the glue that holds any group or organization together while also connecting it to a coalition of key stakeholders. This research focuses on how corporate governance factors (such as board independence, board size, board meetings, and board gender) and company characteristics affect the reputation of Malaysian public listed companies (PLCs). Many studies have looked into the characteristics of corporate governance in Malaysian businesses. However, none of the research has explored this issue using the new reputation measurement. A sample of the 100 largest companies listed on Bursa Malaysia based on their market capitalization for the year ended 2018 was selected. A new measurement, the disclosure index, was created and used to analyze reputation disclosure in the annual report of a corporation. The independent director, board size, and board meeting were statistically significant and associated with the level of reputation disclosure, according to the findings of this study. The results suggest that company directors prioritize good governance and management quality to boost their firm's reputation and acquire a competitive edge.

• Journal of Digestive Cancer Research
• /
• v.2 no.1
• /
• pp.21-23
• /
• 2014

We report a bronchoesophageal fistula that treat with bronchial stent insertion and histoacryl injection. A 52-year-old man with esophagel cancer was transferred for dysphagia management. At the CT scan that underwent on admission, esophageal cancer with multiple lymph node metastasis was observed. At the gastroduodenoscopy and contrast study, bronchoesophageal fistula was observed. Recurrent stent insertion treatment was failed, and then, By the broncoscopy, covered stent was inserted to right bronchus, and By the endoscopy, fibrin glue and histoacryl was injected in the fistula opening. At the contrast study, contrast leakage was not observed, and the patient was discharged. But, at the 14 days after discharge, the patient was admitted to the emerency room because of cough symptom whenever he eat food. The patient was diagnosed with aspiration pneumonia, we were determined that it is unable to oral intake. The patient received a jejunostomy and antibiotic treatment for aspiration pneumonia. He was discharged after symptomatic improvement.

• Clinical Endoscopy
• /
• v.56 no.4
• /
• pp.409-422
• /
• 2023

Endoscopic resection (ER) is widely utilized as a minimally invasive treatment for upper gastrointestinal tumors; however, complications could occur during and after the procedure. Post-ER mucosal defect leads to delayed perforation and bleeding; therefore, endoscopic closure methods (endoscopic hand-suturing, the endoloop and endoclip closure method, and over-the-scope clip method) and tissue shielding methods (polyglycolic acid sheets and fibrin glue) are developed to prevent these complications. During duodenal ER, complete closure of the mucosal defect significantly reduces delayed bleeding and should be performed. An extensive mucosal defect that comprises three-quarters of the circumference in the esophagus, gastric antrum, or cardia is a significant risk factor for post-ER stricture. Steroid therapy is considered the first-line option for the prevention of esophageal stricture, but its efficacy for gastric stricture remains unclear. Methods for the prevention and management of ER-related complications in the esophagus, stomach, and duodenum differ according to the organ; therefore, endoscopists should be familiar with ways of preventing and managing organ-specific complications.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.4
• /
• pp.301-318
• /
• 2024

Contrary to other materials like metals, glass, etc., wood continuously interacts with the environment, increasing and decreasing its moisture content according to the humidity of the air and changing its dimensions by swelling or shrinking. Water diffusion through laminated solid wood is crucial in wood bonding processes. The adhesive layer might block the diffusion if the water vapor diffusion is perpendicular to the bond line. As a result of this blockage, different proportions of deformation appear on the two sides of the bond line, which causes stresses in the bonded assembly. The question arises of how long the bonded structure will keep its integrity due to moisture diffusion blockage, inevitable tensions appearing in the glue line, and how these stresses could be avoided. With cross laminated timber (CLT) solid wood panel production, this question gains new importance. Despite the relevance, only a limited number of publications are available. Comprehensive research would also be necessary considering both the molecular structure and diffusion properties of the adhesive adjusted to the wood species (covering possible substituting wood species, too). Overall, this review serves as a resource for enhancing our understanding of water vapor diffusion through wood adhesive layers and provides insights that have implications for reducing stresses in bonded wood assemblies and the performance of the bonded group over time. Furthermore, identifying knowledge gaps is necessary to establish the basis for investigating the diffusion property of CLT panels.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1381-1388
• /
• 2011

Recently, Because of weight lighting and tighten safety regulations of the railway vehicle railroad weight lighting and safety improvement technology is internationally required. Slide step for moving the passenger to high flatform in the railroad vehicle is recognized of important parts. However, Due to high price and weight, it is limited. In this research, In order to apply for railroad, it was redesigned to optimize part count and reduce the price and weight. By choosing honeycombcore as a part for enduring high weight and weight lighting, We produce honeycombpanel of sandwich structure which a different kind connected by using existing stainless(STS304)steel and thermo plasticity glue. Finally, we can find that honeycombpanel is suitable for weight lighting and high weight. As well as, with test result, we can prove that low-high platform railway system will be optimized, if steps are applied to honeycombpanel.

• Journal of the Korean Society of Food Culture
• /
• v.26 no.6
• /
• pp.621-628
• /
• 2011

This study was aimed at research on Jeonyak (煎藥) appearing in the bibliography. It was during the Goryeo Dynasty that Jeonyak was first mentioned in literature. At this time, Jeonyak was served for consumption during Palgwanhoe. The ingredients and recipes of Jeonyak were listed for the first time in Suunjapbang, a book written by Kim Yu during the Joseon Dynasty. Since then, they have been found in various books and materials. During the Joseon Dynasty, Jeonyak was made in Neuiwon, a medical administrative organization in the palace, and administered as a seasonal food on Dongji Day in the winter. The king gave various to his guests or subjects as special gifts. As a result, Jeonyak became well known to many people and even to those in foreign countries. Jeonyak is a Korean traditional medicated diet food made from decocted beef-feet, bone stock, and other spices, including jujube paste, honey, ginger, pepper, clove, and cinnamon. Jeonyak has a long 800-year history, and its ingredients and recipes have changed only gradually. Milk was a major ingredient of Jeonyak during the Goryeo Dynasty, but glue and gelatin were added in the Joseon Dynasty. Since then, recipes have mainly used gelatin made from beef-feet, skin, beef-bone, and so on. In conclusion, Jeonyak has an 800-year history as a special medicated diet food (藥膳) served seasonally on Dongji Day in the winter.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.1
• /
• pp.28-35
• /
• 2020

Objectives: The need for proper wound closure is of paramount importance after any intra-oral surgery. Various wound closure techniques have been described in literature using traditional non-absorbable suture materials. These include like synthetic absorbable sutures, surgical staples and tissue adhesives. Cyanoacrylates are among the most commonly used biocompatible tissue adhesives. To evaluate and compare intraoral wound healing using 3-0 silk sutures and n-butyl-2-cyanoacrylate after alveoloplasty. Materials and Methods: A total of 20 patients requiring bilateral alveoloplasty in the same arch (upper or lower) were included in this study. Patients with any pre-existing pathology or systemic disease were excluded. After alveoloplasty was performed, the wound was closed using 3-0 braided silk sutures on one side, and using n-butyl-2-cyanoacrylate bio adhesive on the other side. Patients were evaluated based on the following parameters: time required to achieve wound closure; the incidence of immediate and postoperative hemostasis; the time to the use of the first rescue medication; the side where pain first arises; and the side where wound healing begins first. Results: Compared to 3-0 silk sutures, cyanoacrylate demonstrated better hemostatic properties, reduced operative time, reduced postoperative pain and better wound healing. Conclusion: These data suggest that cyanoacrylate glue is an adequate alternative to conventional sutures to close the surgical wound after alveoloplasty, and better than are 3-0 silk sutures.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.2
• /
• pp.129-134
• /
• 2002

The strength and durability of concrete are affected by various factors such as the quality of material, mixing ratio, construction, the method of cure, time elapsed. the condition of test and etc., it is very difficult to pre-estimate the strength of concrete with the use of experimental specimen. The domestic standard of specimen cylindrical type and its sizes are both l0cm$\times$20cm and 15cm$\times$30cm, which are prescribed in KS F2405, and the loading speed is prescribed to test with 2~3kgf/$\textrm{cm}^2$ per second. The loading speed should have great effect on the compressive strength, but in reality in the construction site sometimes the loading speed is applied so dubiously that the value of the compressive strength can be unreliable. And the cross sectional area of a specimen should be level and smooth, otherwise it can be broken at a lower stress than the real strength through the eccentric or intensive working of the load. Capping should be carried out in order to measure the strength correctly. And used for capping are various materials such as capping compound, cement glue, plaster, mechanical grinding and etc. In this study, therefore, I have carried out an experiment on the relationship among the loading speed, the ratio of height to diameter of specimen, the method of capping, and the compressive strength, for the efficient quality control of concrete structures. So this study has been purposed to provide some basic data that can be used effectively at construction sites.