• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.282-283
• /
• 2014

An active study on UHPC, which has been recently used in high-rise building and bridges, is in progress. However, research on adhesion strength of normal concrete and UHPC is required to be studied due to the lack of information. In this study, experimental research progress for adhesion strength (shear strength of adhesive surface) evaluation of Bi-compressive strength concretes (UHPC, Normal concrete) is proceeded. First, specimens using glue are produced and surface treatment methods of concrete bonded section are considered. Second, Direct Shear test is applied on concrete bonded section of UHPC (80~180MPa) and Normal Concrete (NC). As a result of this study, it is confirmed that bond strength is deteriorated as the difference of intensity ration of NC and UHPC increases.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.767-770
• /
• 2000

A novel process is newly developed for building RP(Rapid Prototyping) parts using a sheet lamination technique. The build process of existing sheet lamination type RP machines consists of the following steps : feeding, lamination and cutting. In this process, the laminated part of an object is often scratched by a cutter or damaged by a laser beam due to the cutting operation preceded by lamination, In addition, decubing of the unused portion from the laminated block is difficult. In the new process, cutting operation is performed before lamination. The cutting operation takes place while a paper sheet is firmly attached on the plate using electrostatic force. Then liquid glue is applied to the calculated region of the given contour for lamination. The process aims to manufacture a $2k RP machine, what we call the Freeform Mater I, that can use A4 or latter-size used papers. A prototype machine that demonstrates the design concept is built and further research issues are discussed.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.5 s.133
• /
• pp.50-56
• /
• 2005

The effect of wood material type on biocide retention and distribution during supercritical fluid impregnation was assessed using three different wood types including solid wood, plywood and oriented strand board (OSB). The result revealed that biocide treatability differed with structural composition and permeability of the various materials. Low treatability of plywood might be attributed to interferences of glue line limiting fluid movement. OSB samples showed higher biocide retentions, resulting from the presence of interconnecting gaps permitting more open flow.

• Journal of Chest Surgery
• /
• v.33 no.6
• /
• pp.525-527
• /
• 2000

Subarachnoid-pleural fistula after routine thoracotomy is a rare complication but a very serious problem. Twenty one cases have been reported in the literature. We report a care of subarchnoid-pleural fistula that dveloped after the esecation of posterior mediastinal neurogenic tumor. The patient presented with large amount of clear pleural fluid with mild headache and dizziness. Surgical intervention following a trial of conservative therapy was undertaken because we strongly suspected subarachnoid-pleural fistula. A dural tear was found at the level of resected intercostal nerve root. The dura was closed by way of direct suture and fibrin glue. In this case, the recognition of subarachnoid-pleural fistula formation is difficult because the patient had not presented any neurologic deficit.

• Journal of the Korea Computer Graphics Society
• /
• v.3 no.1
• /
• pp.23-28
• /
• 1997

We reconstruct 3D surface from range image that consists of range map and texture map, and simplify the reconstructed triangular mesh. In this paper, we introduce fast simplification method that is able to glue texture to 3D surface model and adapt to real-time multipled level-of detail. We will verify the efficiency by applying to the scanned data of Korean relics.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.3
• /
• pp.73-81
• /
• 1997

This study was to find the best adhesive condition comparing mechanical property in case of hot-melt adhesion using glue-gun, ultrasonic welding with adhesion and only ultrasonic welding in order to adhere thermoplastic resin of polyethylene (PE) in which reliable adhesion was resulted in case of ultrasonic welding with same materials of PE. The best welding condition were acquired at welding time 1 second, welding pressure 250kPa for PE-PE where welding time and welding pressure were increased in accordance with the increase of material strength. At the best ultrasonic welding conditions, bonding strength of PE-PE welding was about 21MPa of which material have tensile strength of 24MPa. Through the analysis of microscophic test for ultrasonic welding structure, it was distinguished between well welded structure with higher intermolecule flow and bad welded structure with lower flow, of which result is mostly correspond with the result of tensile strength test.

• Journal of Yeungnam Medical Science
• /
• v.34 no.2
• /
• pp.169-173
• /
• 2017

Perianal Crohn's disease is a major problem that impair quality of life. This article reviews the current surgical treatment of Crohn's perianal fistula. Fistulotomy and loose seton are commonly used surgical methods for treatment of perianal Crohn's disease. Mucosal advancement flap and fibrin glue are used in this treatment, despite a lake of controlled trials. Fecal diversion is disturbingly high in complicated complex perianal fistula in Crohn's disease. Ligation of intersphincteric fistula and autologous or allogenic stem cells are new surgical procedures for treatment of Crohn's disease that need further studies. Treatment success might be improved by multimodal treatment and new surgical and medical treatment options.

• Journal of Korean Neurosurgical Society
• /
• v.47 no.6
• /
• pp.477-479
• /
• 2010

A case of delayed progressive extradural pneumatocele after microvascular decompression (MVD) is presented. A 60-year-old male underwent MVD for hemifacial spasm; the mastoid air cell was opened and sealed with bone wax during surgery. One month after surgery, the patient complained of tinnitus, and progressive extradural pneumatoceles without cerebrospinal fluid (CSF) leakage was observed. Revision surgery was performed and the opened mastoid air cell was completely sealed with muscle patch and glue. The patient's symptoms were resolved, with no recurrence of pneumatoceles at 6 month follow up. Progressive extradural pneumatocele without CSF leakage after posterior fossa surgery is a very rare complication. Previous reports and surgical management of this rare complication are discussed.

• Journal of Chest Surgery
• /
• v.27 no.12
• /
• pp.1036-1041
• /
• 1994

Emergency operation was performed in a patient with severe aortic insufficiency caused by type A acute aortic dissection with aberrant high take-off origin of single coronary artery. The single coronary artery was found to arise from an unusual position high in the ascending aorta. Dissection was begun in the aortic root and involved the single coronary ostium. Valve competance was restored by resuspension of the commissures. the false lumen was obliterated with strips of Teflon felt and surgical glue. The aortic tissues were firmly reinforced and sutured. The proximal aortic stump was anatomically reconstructed, and fortunately the aortic valve was preserved and coronary reimplantation avoided. The patient was discharged at postoperative 13 days without specific complications. Postoperative course during the 18 months follow-up was uneventful.

• Journal of the Korean Wood Science and Technology
• /
• v.8 no.2
• /
• pp.1-5
• /
• 1980

This study is carried out to determine the scavenging effect of resorcinol added into the urea formaldehyde resin on the formaldehyde release of plywood, as the preliminary study of using the phenolic substances. The method for formaldehyde determination used in this report is the improved chromotropic acid determination. The results are summarized as follows: 1. Resorcinol added into the urea formaldehyde adhesive acts as a good scavenger. 4 percent of resorcinol reduced the formaldehyde release to less than half content. 2. Adding resorcinol gave better glue shear strength than that of control, showing the peak of the shear strength, at 2 percent and decreased to the same strength as control along its content of 4 percent. 3. Moisture content of air dried plywood met the standard very well.