• 산업기술연구
• /
• 제19권
• /
• pp.25-29
• /
• 1999

Rotary bending fatigue tests were carried out to investigate the fatigue behavior of high performance ductile cast iron experienced super rapid induction heat treatment. The effect of super rapid induction treatment on fatigue limit was experimentally examined with the special focus on the variation surface microstructure and the fatigue crack initiation and propagation through fractography. Main results obtained are as follows. By super rapid induction treatment in FCD500, the martensite structure obtained through conventional quenching heat treatment was confirmed on the specimen surface. The fatigue crack initiation in the hardened surface layer was restricted by the martensite structure and compressive residual stress. Thus, it could be interpreted that the initiation stress would be increased by the improvement of surface structure. The fatigue crack propagation in the hardened layer was retarded by the presence of the globular shape martensite around the graphite nodule and compressive residual stress. The crack propagation path has shown zigzag pattern in the hardened surface layer.

• International Journal of Oral Biology
• /
• 제40권4호
• /
• pp.167-173
• /
• 2015

The purpose of this study was to investigate the antibacterial effect of the low temperature atmospheric plasma device with needle tip designed for easy approach to the oral cavity and root canal against Streptococcus mutans, Enterococcus faecalis and Candida albicans. The antibacterial activities evaluated by measuring clear zone of agar plate smeared with each bacteria after plasma treatment. To quantify antibacterial effects, dilution plate method was used. In addition, scanning electron microscope (SEM) was used for observation of changes in bacterial morphology. As treatment time of plasma increased, the clear zone was enlarged. The death rate was more than 99%. The SEM results showed that the globular shape of bacteria was distorted. These results suggest that needle tip plasma could be an innovative device for prevention of dental caries, and treatment of apical infection and soft tissue diseases.

• 열처리공학회지
• /
• 제19권5호
• /
• pp.249-256
• /
• 2006

Structural studies have been performed on precipitation hardening found in $L1_2$ ordered ${\gamma}^{\prime}-Ni_3(Al,Ti)$ alloys using transmission electron microscopy. A uniform solid solution of ${\gamma}^{\prime}-L1_2$ ordered phase supersaturated with Ni can be obtained by solution annealing in a suitable temperature range. The ${\gamma}^{\prime}$ phase hardens appreciably by the fine precipitation of disordered ${\gamma}$. The shape of ${\gamma}$ precipitates formed during aging is initially spherical or round-cubic and grow into platelets as aging proceeds. High resolution electron microscopy revealed that the ${\gamma}$ precipitates are perfectly coherent with the matrix ${\gamma}^{\prime}$ as long as the ${\gamma}$-precipitates are plates. The loss of coherency initiates by the introduction of dislocations at the ${\gamma}/{\gamma}^{\prime}$ interface followed by the step formation at the dislocations. The ${\gamma}$ precipitates become globular after the loss of coherency. The strength of ${\gamma}^{\prime}-Ni_3(Al,Ti)$ increases over the temperature range of experiment by the precipitation of fine ${\gamma}$ particles. The peak temperature where a maximum strength was obtained shifted to higher temperature.

• 대한화학회지
• /
• 제19권3호
• /
• pp.149-155
• /
• 1975

플라스틱 결정체인 피발산의 temperature-dependent wide-line NMR line width, second monent 및 spin-lattice relaxation times 의 결과는 이 결정체의 특이한 운동학적 성질 및 수소결합에 기인된 것으로 해석된다. 이 분자의 운동학적 성질은 $C_3-C_3'$ reorientation 및 self-diffusion 으로 구성 되었음을 확인했다. Wide-line NMR 연구결과는 또한 Pople-Karasz 융해설과 비교검토되었고, 이 이론과의 차이점은 피발산의 수소결합에 기인되었음을 알아냈다.

• 한국재료학회지
• /
• 제30권11호
• /
• pp.609-614
• /
• 2020

3 mol% yttria-doped stabilized zirconia (3YSZ) is synthesized by a solvothermal process, and its characteristics are investigated using various methods. Also, the dispersibility of synthesized 3YSZ nanoparticles is observed with the species of surface modifier. The 3YSZ nano sol prepared with an optimum condition is employed in prism coating and its properties are evaluated. The synthesized 3YSZ nanoparticles show a globular shape with about 10 to 20 nm crystallite size. The mixed phases with the nano sol show a high specific surface of 178 ㎡/g. The prism sheet coated with the 3YSZ nano sol present an excellent refractive index, transmittance, and luminance; refractive index is 1.603, transmittance is 90.2 %, and luminance of coating film is improved by 5.9 % compared to that of the film without 3YSZ nano sol. It is verified that the surface modified 3YSZ is suitable as the prism sheet for optical displays.

• Applied Microscopy
• /
• 제34권2호
• /
• pp.139-143
• /
• 2004

돌돔 아가미의 미세구조를 광학현미경과 투과전자현미경을 이용하여 관찰하였다. 아가미는 새궁 앞, 뒤 2열로 된 빗모양의 많은수의 새엽과 그리고 각 새엽은 전후 두 개의 새판(gill lamellae)이 근접하여 2열로 배열되어 있다. 상피세포층은 단층으로 큰 핵을 가진 편평상피로 구성되고 표면에는 미세융기가 잘 발달되어 있다. 새판의 기둥 구조는 세로 방향의 미세소관들과 측면 membrane interdigitation을 가지며, 염세포는 수많은 미토콘드리아와 tubular system이 잘 발달되어 있다. 미성숙된 점액세포는 조면세포체와 골지체가 잘 발달되었으며 일부 발달된 점액 과립을 가지고 있다. 성숙한 점액세포는 AB-PAS에 푸른 색을 띄었으며 구형이고 다양한 전자밀도를 가진 거의 같은 크기의 점액과립을 가지고 있다.

• 한국주조공학회지
• /
• 제25권6호
• /
• pp.254-258
• /
• 2005

Semisolid process is possible in any material system possessing a freezing range where the microstructure should consist of the nondendritic globular solid phase separated and enclosed by the liquid phase, referred to as semisolid slurry. There are two primary semisolid processing routes, thixocasting and rheocasting. Especially, rheocasting process has become a new focus in the field of semisolid process because of its many advantages such as no special billet required and possibility of in-house scrap recycling, compared with the thixocasting process. In-Ladle direct thermal control (DTC) rheocasting has been developed, based on the fact that there is slurry and mush transition in every molten metal and the transition, which normally occurs in the range of liquid traction of 0.1 to 0.6, could be controlled by controlling solid shape and relative solid-liquid interfacial energy. In this study, A356 Al alloy was investigated to verify In-Ladle DTC rheocasting for obtaining semisolid slurry. Modeling of heat transfer was carried out to investigate the effect of pouring temperature and ladle material, geometry and temperature and the simulation results were compared with the actual experiments.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.596-601
• /
• 2002

Rotary bending fatigue tests were carried out to investigate the fatigue characteristics of high performance ductile cast iron experienced super rapid induction treatment. The influence of super rapid induction treatment on fatigue limit was experimentally examined with the special focus on the variation of surface microstructure and the fatigue crack initiation and propagation through fractography. Main results obtained are as follows. By super rapid induction treatment in FCD500, the martensite structure obtained through conventional heat treatment was confirmed on the specimen surface. The fatigue crack initiation in the hardened surface layer was restricted by the martensite structure and compressive residual stress. Thus, it could be interpreted that the initiation stress would be increased by improved structure in the surface. The fatigue crack propagation in the hardened layer was retarded by the presence of the globular shape martensite around the graphite nodule and compressive residual stress and the crack propagation behavior has zigzag pattern in the hardened surface layer.

• Plant Biotechnology Reports
• /
• 제3권3호
• /
• pp.205-211
• /
• 2009

An efficient in vitro regeneration protocol for moth bean [Vigna aconitifolia (Jacq.) Marechal] via somatic embryogenesis has been developed. Embryogenic callus cultures were established from the cotyledonary node as explant on semi-solid Murashige and Skoog (MS) medium supplemented with $0.75mg\;1^{-1}$ 2,4-dichlorophenoxyacetic acid (2,4-D) and $1.5mg\;1^{-1}$ 6-benzylaminopurine (BA) and with various additives ($50mg\;1^{-1}$ ascorbic acid and $25mg\;1^{-1}$ each of adenine sulphate, citric acid and $_L-arginine$). Numerous somatic embryos differentiated on MS basal nutrient medium supplemented with $0.25mg\;1^{-1}$ 2,4-D and $0.5mg\;1^{-1}$ of kinetin (Kin). Sustained cell division resulted in the formation of cell aggregates, which progressed to the globular- and heart-shaped somatic embryos and then, if they differentiated properly, to the torpedo shape and cotyledonary stages. The transfer of embryos onto fresh MS basal medium containing $0.2mg\;1^{-1}$ BA and $2.0mg\;1^{-1}$ gibberellic acid enabled the embryos to achieve complete maturation and germination. More than 80% of somatic embryos were converted into true-to-type fertile plants. In vitro-regenerated plantlets with well-developed roots were successfully hardened in a greenhouse and established in soil.

• 한국자원식물학회지
• /
• 제13권3호
• /
• pp.179-187
• /
• 2000

광의의 한국산 개미취속의 16종류에 대하여 열매인 수과의 분류학적 가치를 평가하고자 본 연구를 수행하였다. 수과의 형태는 도피침상 장타원형, 도란형, 장타원형, 도란상 장타원형 의 4유형으로 구분되었으며, 수과에 존재하는 모용은 단열성 원추형, 사상형, 원주형, 두상형, 장축 두상형, 구형의 6유형으로 구분되었다. 이들의 수과 선단에서 분포양상은 무모형, 원추상 모용 소생형, 원추상 모용 밀집형, 원추상-두상 모용 혼생형의 4유형으로 구분되었다. 이러한 수과의 형태와 이에 존재하는 모용의 특징은 분류군내의 개체간에는 변이가 없으나 분류군간에는 뚜렷한 차이를 보여 종을 구분하는 좋은 형질로 여겨졌다. 특히 두상형의 모용의 존재여부와 수과선단의 두상형의 모용과 원추형의 모용이 혼생하는 형질은 광의의 Aster속을 Kalimeris, Heteropappus, Aster, Gymnaster속으로 세분할 때, Kalimeris속과 Heteropappus속 및 Aster속의 Pseudocalimeris절을 구분짓는 형질, 즉 절 이상을 구분하는 형질로서 가치를 지니는 것으로 판단되었다.