• Journal of Plant Biotechnology
• /
• v.34 no.3
• /
• pp.223-227
• /
• 2007

Plant regeneration system from leaf and root segments of Lycoris chejuensis via bulblet formation was established. Surface-sterilized leaf and root segments were cultured on the B5 medium containing 2,4-D. After 12 weeks of culture onto B5 medium containing 2,4-D, white globular structures and white calluses were formed on the cut surface of the explants. The highest frequency of globular structures and calluses formation from leaf explants was 32.1% when leaf explants were cultured onto B5 medium supplemented with 1 mg/L of 2,4-D. However, the higher concentration of 2,4-D (over than 3 mg/L) resulted in decrease of the frequency. In comparison to leaf explants, root segments showed the highest frequency at a rate of 36.1% when root explants were cultured onto B5 medium supplemented with 3 mg/L of 2,4-D. These structures and calluses were sub-cultured and proliferated onto the same culture medium. Upon transfer to B5 basal medium, white globular structures were developed into bulblets and normal plantlets. After 4 weeks of incubation in the light, plantlets were successfully rooted over the frequency of approximately 90%. Rooted plantlets were successfully transferred to potting soil and acclimatized in the growth chamber. The plant regeneration system of Lycoris chejuensis established in this study, might be applied to mass proliferation, conservation of genetic resources and genetic transformation for molecular breeding.

• Journal of Welding and Joining
• /
• v.16 no.4
• /
• pp.39-46
• /
• 1998

$CO_2$ gas shielded arc welding has been characterized with its harsh arc compared to Ar-based shielding gases and with its high level of spattere specially in welding current range of 250~300 amperes. In this range of welding current, the metal transfer mode showed to be changed from short circuit to globular with the increase of welding voltage resulting in so-called the transitional mode in which both modes of transfer appeared together. To characterize the transitional mode, the short circuit events were divided into two groups, i.e. normal short circuit (N.S.C) which has short circuit time $(t_s)$ over 2msec and instantaneous short circuit (I.S.C) of $t_s$$\leq$2msec. The experimental results showed that the number of N.S.C decreased almost linearly with the increase of welding voltage and appeared to be not related with spatter generation rate. However I.S.C became to be pronounced in the transitional condition and its number reached the maximum value at around 29.0 volts. Considering the relation with the spatter generation rate, it was found that the number of I.S.C had a very strong correlation with the spatter generation rate of the transitional condition. It was further demonstrated that spatter generation rate decreased quite linearly with the decrease of I.S.C frequency. It implies that I.S.C is the most important waveform factor controlling the spatter generation of the transitional mode, i.e. in the middle range of welding current. Based on these results, It was discussed that in the transitional mode the basic concept of waveform control for suppressing spatter generation would be different from the one applied for typical short circuit transfer mode of low welding current.

• Journal of Welding and Joining
• /
• v.11 no.3
• /
• pp.22-33
• /
• 1993

Arc sensor is indispensable to arc welding robot systems for compensating the joint misalignment such as mismatch of the workpiece, ill-conditioned positioner and thermal deformation during welding. Furthermore, the amount of these mismatches cannot be preivously expected, and changes from time to time. There are many kinds of seam trackers for correcting the welding path of the robot, where non-contact type sensors arc prevalently used in arc welding robot systems. In this study, an arc sensor was developed for GMA and FCA welding robot system. Since the arc sensor uses the arc characteristics during welding, the operating principle of the arc sensor must be adjusted according to the welding condition. Especially in GMA welding with the $CO_{2}$ shielding gas, the welding arc is not stable because of the short circuit and non-axial globular transfer mode of the molten droplet. In this study, the 2nd order least square curve fitting algorithm was adopted and the applicability of this algorithm was investigated for robot welding systems. For easy usage of the arc sensor, the operating parameters for arc sensor were limited to eight which can be easily determined by the operator.

• Plant Biotechnology Reports
• /
• v.3 no.4
• /
• pp.341-345
• /
• 2009

This study describes culture conditions for a plant regeneration system via a combined pathway of somatic embryogenesis and organogenesis in root explant cultures of the commercial rose cultivar 'Charming'. Root explants formed white calluses at a frequency of 30% after 6 weeks of culture on Schenk and Hildebrandt (SH) medium supplemented with $11mg\;1^{-1}$ 2,4-dichlorophenoxyacetic acid. After 6 weeks of transfer to SH medium without growth regulators, initial white calluses gave rise to globular somatic embryos at a frequency of 2.8%, which were subsequently dedifferentiated to embryonic tissues. Somatic embryos or embryonic tissues initially derived from root explants did not undergo development beyond cotyledonary stage. To produce adventitious shoots, embryonic tissues were sliced and cultured on SH medium with $0.5mg\;1^{-1}$ 6-benzyladenine. After 4 weeks of culture, 28% of embryonic tissue explants formed adventitious shoots. Regenerated shoots were rooted on half strength SH medium with $0.1mg\;1^{-1}$ ${\alpha}-naphthalaneacetic$ acid and subsequently grown to maturity. Root-derived embryonic tissues were proliferated by subculture, while retaining the capacity for shoot production for a few years.

• Journal of Korea Foundry Society
• /
• v.25 no.6
• /
• pp.254-258
• /
• 2005

Semisolid process is possible in any material system possessing a freezing range where the microstructure should consist of the nondendritic globular solid phase separated and enclosed by the liquid phase, referred to as semisolid slurry. There are two primary semisolid processing routes, thixocasting and rheocasting. Especially, rheocasting process has become a new focus in the field of semisolid process because of its many advantages such as no special billet required and possibility of in-house scrap recycling, compared with the thixocasting process. In-Ladle direct thermal control (DTC) rheocasting has been developed, based on the fact that there is slurry and mush transition in every molten metal and the transition, which normally occurs in the range of liquid traction of 0.1 to 0.6, could be controlled by controlling solid shape and relative solid-liquid interfacial energy. In this study, A356 Al alloy was investigated to verify In-Ladle DTC rheocasting for obtaining semisolid slurry. Modeling of heat transfer was carried out to investigate the effect of pouring temperature and ladle material, geometry and temperature and the simulation results were compared with the actual experiments.

• Plant Biotechnology Reports
• /
• v.3 no.3
• /
• pp.251-257
• /
• 2009

Embryogenic callus was obtained from bulb segments of Iris pseudacorus on Murashige and Skoog (MS) medium with 2,4-dichlorophenoxyacetic acid (2,4-D) alone or in combination with kinetin. When early globular somatic embryos were subcultured onto MS medium with $4.52{\mu}M$ 2,4-D, high frequency of somatic embryogenesis was obtained. Deprivation of 2,4-D was required for maturation. Mature somatic embryos had an elongated scutellum with a notch on the base of scutellum. Separation of embryos from embryo clusters was necessary to enhance the frequency of germination. Germination was stimulated by separation of embryos from embryo clusters and transfer onto fresh half-strength MS medium with 3% sucrose. After acclimation in artificial soil in greenhouse for 2 months, 96.4% of plantlets survived.

• Journal of Plant Biotechnology
• /
• v.7 no.4
• /
• pp.259-265
• /
• 2005

Indian citrus ringspot virus (ICRSV)-free plants of Kinnow mandarin (Citrus nobilis Lour x C. deliciosa Tenora) were raised from virus-infected plants using unfertilised ovules as explants. Plants were tested by indirect ELISA and RT-PCR before using their explant. An amplified product of 539 bp was obtained by RT- PCR in ICRSV infected plants. Unfertilized ovules were excised from unopened flower buds of plants tested postive for virus and were cultured on Murashige and Skoog's (MS) basal medium supplemented with various concentrations of kinetin (KN) or malt extract (ME). Maximum induction (31.94%) of embryogenic callus was observed on MS medium supplemented with KN ($9.29\;{\mu}M$). Transfer of embryogenic calli to similar media composition resulted in somatic embryogenesis in all cultures, with an average number of 60.36 globular, 17.39 heart and 7.71 cotyledonary-shaped somatic embryos per culture. All cotyledonary shaped embryos developed into complete plantlets within 60 days on transfer to similar medium. Embryogenic callus induction, somatic embryo formation, maturation, germination and plantlet formation were achieved on MS medium supplemented with KN ($9.29\;{\mu}M$) alone. The plantlets derived from somatic embryos were transferred to sterilized soil, sand and vermiculite (3:1:1) mixture. After acclimatization, the plantlets were transferred to screen house and were indexed for ICRSV employing indirect ELISA and RT-PCR and found free of virus. A distinct feature of this study is the induction of somatic embryogenesis from unfertilised ovules to produce virus-free plants.

• Journal of Sericultural and Entomological Science
• /
• v.2
• /
• pp.1-31
• /
• 1962

The purpose of this treatise is to prove the presence of cystine in silk fiber through wide sampling throughout all the sericultural processes of Bombyx mori.; also to show that disulfide cross linkages exist in the silk fiber. The conclusions reached were as follows: 1. Crystalline cystine was obtained from silk fibroin using Folin's Method. 2. Analytical data showing the cystine content of silk fiber and its related materials were obtained using Sullvan's Method as follows: Material Percent Cystine A. Mulberry leaf protein 0.175 B. Silkworm egg 0.33 C. Silkworm Body, matured, fat extracted, without silk gland 0.41 D. Silk gland, matured 1.23 E. Silkworm feces none F. Silkworm pupa, fat extracted 0.30 G. Silkworm moth, fat extracted 0.60 H. Raw Silk 0.22 I. Fibroin 0.175 J. Sericin 0.30 3. The presence of cystine in the silkworm was substantiated the existence of 0.175 % methionine in mulberry leaves and 0.12% methionine in the silk gland. 4. Part of the sulfhydryl compounds in the silk gland is believed to transfer to serine and methionine, with the former being secreted into the liquid silk finally as silk fiber and the latter used for nutritive purposes in the growing of silk gland tissue. 5. The cystine content is variable by mulberry species, silkworm species, sex, breeding process, and other culturing environments. 6. Hybrid silkworms require more nutritive amino acids for effective growth than the original parents, and secrete less of them as silk fiber. 7. From such an observation, the amino acid composition of silk fiber is believed to be fairly flexible. Cystine if included in the amorphous part of the fiber, especially in sericin. 8. The result from enriching the silkworm diet with pure cystine or wool cystine did not result in any advantage, therefore it is believed that the natural cystine and methionine contents in the mulberry leafaregoodenoughforsilkwormnutrition. 9. The disulfide cross linkage in silk fiber was verified by using the Harris Method. Contraction took place following the treatment of the fiber with various salts and acids. Comparisons were made with wool fiber. 10. During these experiments, the fibrious structure of silk fiber and the net-globular liquid form were photographed microscopically. It is believed that the globules of liquid silk are net-formed by the inter attraction of the OH ion of the globular peptide and the H ion of water as shown by the hair cracking behavior of the film. The net-globular protein precipitation from the mulberry protein solution showed that mulberry is a proper diet for the formation of fibrous protein in the silk fiber. 11. The significance of the presence of cystine in silk fiber as emphasized in this paper should result in modification of the general conception that cystine is absent from this fiber. NOTICE: A part of this treatise was presented at the annual Korea Sericultural Society meeting held in 1961.

• BMB Reports
• /
• v.48 no.12
• /
• pp.685-690
• /
• 2015

The eukaryotic genome is packed into chromatin, which is important for the genomic integrity and gene regulation. Chromatin structures are maintained through assembly and disassembly of nucleosomes catalyzed by histone chaperones. Asf1 (anti-silencing function 1) is a highly conserved histone chaperone that mediates histone transfer on/off DNA and promotes histone H3 lysine 56 acetylation at globular core domain of histone H3. To elucidate the role of Asf1 in the modulation of chromatin structure, we screened and identified small molecules that inhibit Asf1 and H3K56 acetylation without affecting other histone modifications. These pyrimidine-2,4,6-trione derivative molecules inhibited the nucleosome assembly mediated by Asf1 in vitro, and reduced the H3K56 acetylation in HeLa cells. Furthermore, production of HSV viral particles was reduced by these compounds. As Asf1 is implicated in genome integrity, cell proliferation, and cancer, current Asf1 inhibitor molecules may offer an opportunity for the therapeutic development for treatment of diseases.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.1
• /
• pp.1-6
• /
• 1994

Cotyledonary and hypocotyl explants of melon seedlings were cultured on Murashige and Skoog's (MS) medium supplemented with various concentrations of 2,4-Dichlorophenoxyacetic acid (2,4-D) and benzyladenine (B.A).Up to 22% of cotyledonary explants and 7%, of hypocotyl explants, respectively: Produced somatic embryos through intervening two types of calli: bright yellow compact (BYC) callus and pale-yellow compact (PYC) callus. BYC callus was capable of producing somatic embryos at initial culture, but it became necrotic as subrulhues proceeded. In contrast UC callus was incapable of producing somatic embryos during initial culture (first 6 weeks), but it became bright-yellow friable (BYF) callus with forming a few globular embryos after 2 months of subculture, indicating that the callus turned embryogenic. The embryogenic capacity of BYF maintained for over one year when the callus was sucultured at 4-week interval. Upon transfer onto MS basal medium the callus gave rise to numerous somatic embryos and subsequently converted to plantlets. Plantlets were transplanted to potting soil and grown to maturity in the phyotron.