• Journal of Distribution Science
• /
• v.15 no.9
• /
• pp.5-16
• /
• 2017

Purpose - This research is to provide new insights for policy makers in Korea, comparing South Korea and foreign countries such as Japan, UK, France, Germany, Netherlands, Sweden, Spain and the forth, in terms of the effects of retail regulations on a retail trade industry. Research design, data, and methodology - After introduction, the research begins with literature review on the background why advanced countries have introduced retail legislations, then, will present their effects. The fourth section will compare the South Korea with the above foreign countries. Finally, the authors will draw conclusions and mention not only research limitations but also future research directions. Results - Based on the previous research, the authors compared Korea and advanced countries, in terms of how retail regulations influence retail employment, retail productivity, retail price, and the protection of independent retailers. The authors found that industrialized countries have made a significant effort to protect small shops for social stability with many different regulations and/or budget. With regard to results, however, the degree of its achievement is lower than expected. Conclusions - In order to protect small- and medium-sized retailers efficiently and effectively, policy makers need to develop better sophisticated retail regulations than those of advanced countries.

• Strategy21
• /
• s.36
• /
• pp.150-179
• /
• 2015

This thesis analyzes Somali piracy as a non-traditional threat to the Sea Lines of Communication (SLOC) and international countermeasures to the piracy. In an era of globally interdependent economies, the protection of sea lines and freedom of navigation are prerequisites for the development of states. Since the post-Cold War began in the early 1990s, ocean piracy has emerged as a significant threat to international trade. For instance, in the Malacca Strait which carries 30 percent of the world's trade volume, losses from failed shipping, insurance, plus other subsequent damages were enormous. Until the mid-2000s, navies and coast guards from Malaysia, Indonesia, Singapore, together with the International Maritime Organization (IMO), conducted anti-piracy operations in the Strait of Malacca. The combined efforts of these three maritime states, through information sharing and with reinforced assets including warships and patrol aircrafts, have successfully made a dent to lower incidents of piracy. Likewise, the United Nations' authorization of multinational forces to operate in Somali waters has pushed interdiction efforts including patrol and escort flotilla support. This along with self-reinforced security measures has successfully helped lower piracy from 75 incidents in 2012 to 15 in 2013. As illustrated, Somali piracy is a direct security threat to the international community and the SLOC which calls for global peacekeeping as a countermeasure. Reconstructing the economy and society to support public safety and stability should be the priority solution. Emphasis should be placed on restoring public peace and jurisdiction for control of piracy as a primary countermeasure.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1322-1327
• /
• 2003

It is important to determine supporting locations for structural stability of a structure under non-uniform load in space interfered by other parts. In this case, There are many local optima with discontinuous design space. Therefore, The traditional optimization methods based on derivative are not suitable. Whereas, Genetic algorithm(GA) based on stochastic search technique is a very robust and general method. This paper has been presented to determine supporting locations of the vertical supports for reducing stress of the KSTAR(Korea super Superconducting Tokamak Advanced Research) IVCC(In-vessel control coil) under non-uniform electromagnetic load and space interfered by other parts using genetic algorithm. For this study, we develop a program combining finite element analysis with a genetic algorithm to perform structural analysis of IVCC. In addition, this paper presents a technique to perform optimization with FEM when design variables are trapped in an incongruent design space.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.223-227
• /
• 2002

As the channel length of device shrinks below $0.13{\mu}m$, CMP(chemical mechanical polishing) process got into key process for global planarization in the chip manufacturing process. The removal rate and non-uniformity of the CMP characteristics occupy an important position to CMP process control. Especially, the post-CMP thickness variation depends on the device yield as well as the stability of subsequent process. In this paper, every wafer polished two times for the improvement of oxide CMP process characteristics. Then, we discussed the removal rate and non-uniformity characteristics of post-CMP process. As a result of CMP experiment, we have obtained within-wafer non-uniformity (WIWNU) below 4 [%], and wafer-to-wafer non-uniformity (WTWNU) within 3.5 [%]. It is very good result, because the reliable non-uniformity of CMP process is within 5 [%].

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.923-930
• /
• 2018

Based on the application of an integrated dynamic brake (IDB) system that uses a PWM inverter fed-AC motor drive to operate the piston, a new active zero state PWM (AZSPWM) is proposed to improve the stability and reliability of the IDB system by suppressing the conducted electro-magnetic interference (EMI) noise under a wide range of load torque. The new AZSPWM reduces common-mode voltage (CMV) by one-third when compared to that of the conventional space vector PWM (CSVPWM). Although this method slightly increases the output current ripple by reducing the CMV, like the CSVPWM, it can be used within the full range of the load torque. Further, unlike other reduced common-mode voltage (RCMV) PWMs, it does not increase the switching power loss. A theoretical analysis is presented and experiments are performed to demonstrate the effectiveness of this method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.3
• /
• pp.175-184
• /
• 2001

In this study, the improved throughput and stability in device fabrication could be obtained by applying CMP process to STi structue in 0.18 um semiconductor device. To employ the CMP process in STI structure, the Reverse Moat Process used to be added after STI Fill, as a result, the process became more complex and the defect were seriously increased than they had been,. Removal rate of each thin film in STI CMP was not uniform, so, the device must have been affected. That is, in case of excessive CMP, the damage on the active area was occurred, and in the case of insufficient CMP nitride remaining was happened on that area. Both of them deteriorated device characteristics. As a solution to these problems, the development of slurry having high removal rate and high oxide to nitride selectivity has been studied. The process using this slurry afford low defect levels, improved yield, and a simplified process flow. In this study, we evaluated the 'High Selectivity Slurry' to do a global planarization without reverse moat step, and also we evaluated EPD(Eend Point Detection) system with which 'in-situ end point detection' is possible.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.4
• /
• pp.37-42
• /
• 2018

Purpose - The purpose of this study is to analyze the current status of various fusion research journals and the operational strategies of such journals and compare them with the operational strategies of IJIDB. Research design, data, and methodology - This study focused on the contents analysis of convergence journals after summarizing the development history from IJIDB's past and its external situation. In addition, we analyzed other strategies such as the number of publication journals, the number of publications, the academic scope, and the impact factor that other convergence journals operate on. Results - As a result of the analysis, the convergent journals showed to have several related journals, and some journals managed their impact factor well at 5.8. Also, some journals loaded 25 papers in one volume. Also, the managerial functions in IJIDB should be developed further to increase its stability. Finally, opportunities for articles by Candidates of Ph.D. and Masters degree students should be more open to in this field. Conclusions - If IJIDB finds its competitiveness in comparison with the operational strategies of other convergence journals, it will be the best journal in the Korea Citation Index to receive the most research papers and hospitality from scholars in the Korean journals.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.7-12
• /
• 2006

The propagation rates ($U_{edge}$) of various premixed edge-flames were measured as a function of global strain rate (${ \sigma}$), mixture strength, and Lewis number (Le). Using a counterflow slot-jet burner with electrical heaters at each end, both advancing (positive $U_{edge}$) and retreating (negative $U_{edge}$) edges can be studied as they propagate along the long dimension of the burner. Preliminary results are presented for single and twin premixed hydrocarbon edge-flames in terms of the effects on $U_{edge}$. A low-${\sigma}$ extinction limit has been discovered for all mixtures tested but further analysis is necessary for full characterization since sufficiently $high-{\sigma}$ leads to an apparent stability limit. Propagation rates clearly show a strong dependence on Le. Future work will focus on completing the premixed hydrocarbon edge-flame analysis and include investigations into non-premixed edge-flames and edge-flames composed of fuels such as hydrogen ($H_2$) with significantly lower Le.

• Korean Journal of Pharmacognosy
• /
• v.43 no.3
• /
• pp.257-264
• /
• 2012

The purpose of this study was to estimate the shelf-life of Ssanghwa-tang by long-term storage test. Experiments were conducted to evaluate the stability such as the selected physicochemical, pH, identification, heavy metal, microbiological experiment under a long-term storage test of Ssanghwa-tang. The significant change was not showed in pH, heavy metal, microbiological, identification test and quantitative analysis based on long-term storage test. The contents of albiflorin, paeoniflorin, cinnamic acid, liquiritin, and glycyrrhizin in long-term storage test were 66.8-93.1 ${\mu}g/mL$, 429.0-495.0 ${\mu}g/mL$, 3.8-4.4 ${\mu}g/mL$, 32.0-38.1 ${\mu}g/mL$, and 66.8-71.7 ${\mu}g/mL$, respectively. Shelf-lifes by 5 compounds about 3 lots at room temperature were predicted 21-37, 14-21, and 16-72 months, respectively. The suggested shelf-life would be helpful on the storage and distribution of herbal medicine.

• Journal of Biosystems Engineering
• /
• v.38 no.2
• /
• pp.149-162
• /
• 2013

Purpose: In image segmentation via thresholding, Otsu and Kapur methods have been widely used because of their effectiveness and robustness. However, computational complexity of these methods grows exponentially as the number of thresholds increases due to the exhaustive search characteristics. Methods: Particle swarm optimization (PSO) and genetic algorithms (GAs) can accelerate the computation. Both methods, however, also have some drawbacks including slow convergence and ease of being trapped in a local optimum instead of a global optimum. To overcome these difficulties, we proposed two new multi-level thresholding methods based on Bacteria Foraging PSO (BFPSO) and real-coded GA algorithms for fast segmentation. Results: The results from BFPSO and real-coded GA methods were compared with each other and also compared with the results obtained from the Otsu and Kapur methods. Conclusions: The proposed methods were computationally efficient and showed the excellent accuracy and stability. Results of the proposed methods were demonstrated using four real images.