• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.10-18
• /
• 2010

The polar transmitter is applied to the narrowband communication systems such as GSM (Global System for Mobile Communications), EDGE (Enhanced Data Rates for GSM Evolution), and GPRS (General Packet Radio Service). To apply polar transmitter for the wideband communication like OFDM (Orthogonal Frequency Division Multiplexing) where the high PAPR (Peak-to-Average Power Ratio) problem occurs, this paper proposes a windowed-sinc function based PAPR reduction scheme. The proposed algorithm mitigates the effect of excessive suppression due to successive peaks or relatively high peaks of the signal. The BER (Bit Error Rate) and EVM (Error Vector Magnitude) performances are measured for various window types and lengths. The simulation results demonstrate that the proposed algorithm achieves significant improvement in terms of BER and PAPR reduction performance with similar spectrum performance to the conventional peak windowing scheme.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.148-154
• /
• 2015

Reports show that global system for mobile communication (GSM) mobile phones, or two-generation (2G) mobile phones, could affect functions of pacemakers and implantable cardioverter defibrillators (ICDs). In this study, we evaluated the effects of radio frequency electromagnetic fields (RF-EMFs) emitted by wideband code division multiple access (WCDMA) mobile phones, which were third-generation (3G) mobile phones, on pacemakers and ICDs. Five pacemakers and three ICDs were subjected to in-vitro test using a ECG simulator. We used a WCDMA module (average power : 0.25 W, frequency band : 1950 MHz) instead of a real WCDMA mobile phone. To assess the effects of the WCDMA module on pacemakers and ICDs, each implantable device was placed in close proximity (within 3 mm) to the WCDMA module for 5 min. As a result, no effects were observed on the five pacemakers and three ICDs for the RF-EMFs emitted by the WCDMA module. Because WCDMA mobile phones have the higher frequency band (1800-2200 MHz) and lower power output (0.01-0.25 W) than GSM moboile phone, the RF-EMFs emitted by WCDMA mobile phones do not affect patients with pacemaker or ICD.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.4
• /
• pp.470-476
• /
• 2008

In this paper, we describe the cause of TDMA noise and distinction method of TDMA noise source in a GSM mobile phone. The causes of TDMA noise are composed of RF(Radio Frequency) energy coupling and low frequency energy coupling by burst ripple. We propose the distinction method of TDMA noise source from output(TDMA noise measurement) and frequency response of a system(audio path). Especially we propose a method of insertion loss($S_{21}$) analysis and the improvement method for RF energy coupling. Capacitor(40 pF) is a solution to reduce RF energy coupling and therefore TDMA noise was reduced by 10 dB.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.230-235
• /
• 2003

최근의 무선통신 시스템은 유지, 보수 및 구축이 유선통신 시스템에 비해 용이하고 이동성을 제공할 수 있다는 장점에 의해, 열차, 차량, 미사일 등의 이동체 제어와 관련된 분야에서의 연구가 활발히 진행되고 있다. 열차 또는 차량 제어와 같이 안전성이 중요시되는 분야에 있어서 전파에 의한 무선 링크는 가장 문제가 되는 부분으로서, 일반적으로 통신시스템은 어느 한 경로에서 고장이 발생하더라도 설계시 정해진 일정수준의 기능을 제공하는 생존성(survivability)을 지니도록 설계되어진다. 이와 관련한 연구와 개발은 대부분 공중 전화망과 고속 데이터 통신망을 대상으로 수행되었다. 본 논문에서는 유럽의 차세대 열차제어시스템에 적용하기 위해 기존의 유럽 표준 이동통신 시스템인 GSM(Global System for Mobile Communications)을 철도분야의 특수성에 맞도록 보완한 GSM-R(GSM-Railway)을 사례로 무선통신 시스템의 생존성을 검토한다.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.211-214
• /
• 2007

In this paper, we have designed microstrip antenna if 800[MHz] band It will be able to integrate TRS(Trunked Radio System), GSM(Global System for Mobile telecommunication) band including the CDMA(Code Division Multiple Access) band we designed repeater and a base station antenna which is possible at the ship and marine of safety. It is improves a narrow bandwidth problem of microstrip antenna. It had U-shaped feeding structure at a rectangular patch And ground or feeding structure used between dielectric constant(${\varepsilon}_T$ = 2.1), patch or feeding structure used between dielectric constant(${\varepsilon}_T$ =1). So it used a duplex resonance effect Designed frequency bandwith(V5WR 2:1) if the antenna showed good characteristic of $780[MHz]{\sim}1.83[GHz]$ to 2.61[GHz]. Also the E-plan and H-plan all profit 9.4[dBi] above, the 3[dB] beam width showed the characteristic over the E-plan and H-plan $60^{\circ}$ to be improved.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.76-78
• /
• 2011

In this paper, 0.8 GHz and 1.8 GHz dual-band antenna was designed for global system for mobile communications (GSM) and the Long Term Evolution (LTE) The proposed antenna was made using CST Microwave Studio 2009. My script antenna's substrate is Taconic TLY-5 and dielectric constant is 2,2 and has 1.0mm thickness with a compact design of the proposed antenna, Thus it shows that this proposed antenna can be used in Wireless Communication System.

• Journal of electromagnetic engineering and science
• /
• v.9 no.1
• /
• pp.32-37
• /
• 2009

Various Class-E CMOS power amplifiers for GSM applications are presented. A stage-convertible transformer for a dual mode power amplifier is proposed to increase efficiency in the low-output power region. An integrated passive device(IPD) process is used to reduce combiner losses. A split secondary 1:2 transformer with IPD process is designed to obtain efficient and symmetric power combining. A quasi-four-pair structure of CMOS PA is also proposed to overcome the complexities of power combining.

• Journal of Korea Spatial Information System Society
• /
• v.4 no.2 s.8
• /
• pp.23-34
• /
• 2002

Various tries are in progress to expand the usability of wireless telecommunication harminized internet technology. The most typical example among those services is LBS(Location Based Service). Nowaday, Standards for telecommunication system of LBS centers round on 3GPP(3rd Generation Partnership Project) and 3GPP2. In this paper we compare the telecommunication system of 3GPP and 3GPP2 in order to make domestic standards of telecommunication system to provide LBS. First, we investigate network models and interfaces of GSM(Global System for Mobile) and ANSI(America National Standard Institute)-41/PCS1900 - Telecommunication type of 2nd generation. Also we consider those of UMTS (Universal Mobile Telecommunication System) and cdma2000 - Telecommunication type of 3nd generation. Then we analysis function components for LBS of each network models details.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.117-120
• /
• 2003

GPRS(General Packet Radio Service) 서비스는 circuit 기반의 GSM(Global System for Mobile Communication)의 기본 망구조를 이용하여 packet 서비스를 지원하도록 변형시킨 모델이다. 기본적으로 GPRS는 GSM의 많은 부분을 계승하여 서비스를 지원하고 있기 때문에 GSM이 가지고 있던 문제점을 그대로 이어받게 되었는데, 본 논문에서는 사용자 인증 프로시져등에서 문제시 될 수 있는 부분들에 대해 살펴보고, 이를 보완 할 수 있는 방법으로 공개키의 암호화 모드와 인증 모드를 사용한 인증 프로시져와 시스템 구조를 소개하고자 한다. 또한 공개키 구조의 인증을 사용함으로써 필요로 하게 되는 키 관리에 대한 방법을 제시하고 앞으로 해결해 나가야 될 문제에 대해 언급을 하고자 한다.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.630-634
• /
• 2010

In this paper, we designed and fabricated a multi-band folded monopole antenna for mobile handsets that can be used for multiple services. The proposed antenna, with a small size of $28.060{\times}12.665{\times}5.035mm^3$ can provide sufficient bandwidth to cover the GSM900 (Global System for Mobile Communications: 880-960 MHz), DCS (Digital Cellular System: 1710-1880 MHz), K-PCS (Korea-Personal Communication Service: 1750-1870 MHz), Wibro (2300-2390 MHz) and Bluetooth (2400-2483 MHz) bands.