• Earthquakes and Structures
• /
• v.4 no.1
• /
• pp.85-108
• /
• 2013

The research presented in this paper deals with the seismic protection of existing frame structures by means of passive energy dissipation. A displacement-based procedure to design dissipative bracings for the seismic protection of frame structures is proposed and some applications are discussed. The procedure is based on the displacement based design using the capacity spectrum method, no dynamic non linear analyses are needed. Two performance objective have been considered developing the procedure: protect the structure against structural damage or collapse and avoid non-structural damage as well as excessive base shear. The compliance is obtained dimensioning dissipative braces to limit global displacements and interstorey drifts. Reference is made to BRB braces, but the procedure can easily be extended to any typology of dissipative brace. The procedure has been validated through a comparison with nonlinear dynamic response of two 2D r.c. frames, one bare and one infilled. Finally a real application, on an existing 3D building where dissipative braces available on market are used, is discussed.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.607-610
• /
• 2002

Even though digital video coding techniques have been developed very rapidly, rate controlling is still an unsolved problem. This paper presents a new scene adaptive video encoding scheme for MPEG-1 and MPEG-2 video encoders. Degradation of picture quality at scene changes due to poor prediction of global complexity measure is addressed. The proposed scheme determines the picture types adaptively based on scene contents of each video frame. The effective placement of reference and inter-reference frames is studied at sudden scene changes and gradual scene changes respectively. Results show that the proposed scheme demonstrates a significant improvement in performance compared to TM5〔1〕.

• The Journal of Korea Robotics Society
• /
• v.13 no.2
• /
• pp.113-120
• /
• 2018

To fly a drone or unmanned aerial vechicle(UAV) safely, its pilot needs to maintain high situation awareness of its flight space. One of the important ways to improve the flight space awareness is to integrate both the global and the local navigation map a drone provides. However, the drone pilot often has to use the inconsistent reference frames or perspectives between the two maps. In specific, the global navigation map tends to display space information in the third-person perspective, whereas the local map tends to use the first-person perspective through the drone camera. This inconsistent perspective problem makes the pilot use mental rotation to align the different perspectives. In addition, integrating different dimensionalities (2D vs. 3D) of the two maps may aggravate the pilot's cognitive load of mental rotation. Therefore, this study aims to investigate the relation between perspective difference ($0^{\circ}$, $90^{\circ}$, $180^{\circ}$, $270^{\circ}$) and the map dimensionality matches (3D-3D vs. 3D-2D) to improve the way of integrating the two maps. The results show that the pilot's flight space awareness improves when the perspective differences are smaller and also when the dimensionalities between the two maps are matched.

• Journal of the Korean Geophysical Society
• /
• v.9 no.3
• /
• pp.151-158
• /
• 2006

Highly accurate surface velocity estimation using modern geodetic techniques plays very important role in the geological and geophysical interpretation. Researches with GPS are ongoing in many countries of the world. This study aims to estimate the amount of crustal deformation and the direction of deformation in the Korean Peninsula and in its neighbor. We used GAMIT that is a comprehensive GPS analysis package developed at MIT. Then, a Global Kalman filter called GLOBK is used to combine the results from GAMIT and to estimate the relative and absolute velocity vector for the crustal deformations. To estimate station velocity accuracy and reliably, it is extremely important to pay great attention to the reference frame. Firstly, using the Suwon (SUWN) of Eurasian plate as main frame, we estimate the relative amount of crustal deformation and a direction of Eurasian plate and North American plate, Secondly, using ITRF 2000 as main frame, we estimate the absolute crustal deformation of Eurasian plate and North American plate. The continent of Eurasian where has the Korean Peninsula deforms 33.36 mm per year to East-Southeast (ESE), and Japanese Tsukuba (TSKB) in North American plate deforms to South-Southwest (SSW). Finally, the Korean Peninsula is approaching the Japanese Island and the rate of horizontal crustal deformation between the Suwon and the Tsukuba is about 31.98 mm per year in the moving direction of N85.9oW (274.1o) for the past three years.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.3
• /
• pp.217-223
• /
• 2011

Precise point positioning (PPP) is increasingly used in several parts such as monitoring of crustal movement and maintaining an international terrestrial reference frame using global positioning system (GPS) measurements. An accuracy of PPP data processing has been increased due to the use of the more precise satellite orbit/clock products. In this study we developed PPP algorithm that utilizes data collected by a GPS receiver. The measurement error modelling including the tropospheric error and the tidal model in data processing was considered to improve the positioning accuracy. The extended Kalman filter has been also employed to estimate the state parameters such as positioning information and float ambiguities. For the verification, we compared our results to other of International GNSS Service analysis center. As a result, the mean errors of the estimated position on the East-West, North-South and Up-Down direction for the five days were 0.9 cm, 0.32 cm, and 1.14 cm in 95% confidence level.

• Journal of the Korean earth science society
• /
• v.40 no.3
• /
• pp.283-299
• /
• 2019

The purpose of this study is to identify the conflict frames in the process of designating the national geopark, among local residents, geology experts, and local public officials. For this purpose, the progress of the public hearing on the implementation of the national geopark in Buan and Gochang were recorded with prior consent from the participants and transferred in text form. Subsequently, we developed a reference frames for analyzing conflict frames through literature review, and analyzed the conflict frames by three researchers based on this. These analyzed conflict frames were again analyzed by using semantic network analysis. The results are as follows. In the Buan area, 'Sagree' frame, 'Snot' frame, and 'Sdisagree' frame showed high eigenvector centrality, and 'Gharm' frame and 'Cmeconomy' frame were closely connected to the 'Snot' frame located at the center of the semantic network. In the Gochang area, 'Aresource' frame, 'Cmexample' frame, and 'Gharm' frame showed high eigenvector centrality, and 'Gharm' frame and 'Cmproblemsolution' frame were closely connected to the 'Snot' frame located at the center of the semantic network. Through these results, we could see that there is still the conflict about the certification of national geopark between stakeholders in Buan, and that Gochang's stakeholders are proudly aware of their own resources. The Buan's stakeholders focused on economic gains in resolving conflicts, while Gochang's stakeholders focused on problem solving. This result of this study provides information in conflict from the national geopark in other regions.

• Steel and Composite Structures
• /
• v.34 no.5
• /
• pp.715-732
• /
• 2020

High-strength steel composite Y-eccentrically braced frame (Y-HSS-EBF) is a novel structural system. In this study, the spatial substructure hybrid simulation test (SHST) method is used to further study the seismic performance of Y-HSS-EBF. Firstly, based on the cyclic loading tests of two single-story single-span Y-HSS-EBF planar specimens, a finite element model in OpenSees was verified to provide a reference for the numerical substructure analysis model for the later SHST. Then, the SHST was carried out on the OpenFresco test platform. A three-story spatial Y-HSS-EBF model was taken as the prototype, the top story was taken as the experimental substructure, and the remaining two stories were taken as the numerical substructure to be simulated in OpenSees. According to the test results, the validity of the SHST was verified, and the main seismic performance indexes of the SHST model were analyzed. The results show that, the SHST based on the OpenFresco platform has good stability and accuracy, and the results of the SHST agree well with the global numerical model of the structure. Under strong seismic action, the plastic deformation of Y-HSS-EBF mainly occurs in the shear link, and the beam, beam-columns and braces can basically remain in the elastic state, which is conducive to post-earthquake repair.

• Computational Structural Engineering
• /
• v.7 no.4
• /
• pp.69-83
• /
• 1994

An explicit finite element nonlinear formulation for very large deformations of plane frame structures is developed. The formulation is based on an updated material reference frame and hence a true stress-strain relationship can be directly applied to characterize the properties of material which is subjected to very large deformations. In the formulation, a co-rotational approach is applied to deal with the large rotations but small strain problems. Straight beam element is considered when the strain of an element is large. The element formulation is based on the small deflection beam theory but with the inclusion of the effect of axial force. The element equations are constructed in an element local coordinate system which rotates and translates with the element, and then transformed to the global coordinate system. Several numerical examples are analyzed to validate the presented formulation.

• Journal of Astronomy and Space Sciences
• /
• v.30 no.4
• /
• pp.315-320
• /
• 2013

Space geodetic techniques can be used to obtain precise shape and rotation information of the Earth. To achieve this, the representative combination solution of each space geodetic technique has to be produced, and then those solutions need to be combined. In this study, the representative combination solution of very long baseline interferometry (VLBI), which is one of the space geodetic techniques, was produced, and the variations in the position coordinate of each station during 7 years were analyzed. Products from five analysis centers of the International VLBI Service for Geodesy and Astrometry (IVS) were used as the input data, and Bernese 5.0, which is the global navigation satellite system (GNSS) data processing software, was used. The analysis of the coordinate time series for the 43 VLBI stations indicated that the latitude component error was about 15.6 mm, the longitude component error was about 37.7 mm, and the height component error was about 30.9 mm, with respect to the reference frame, International Terrestrial Reference Frame 2008 (ITRF2008). The velocity vector of the 42 stations excluding the YEBES station showed a magnitude difference of 7.3 mm/yr (30.2%) and a direction difference of $13.8^{\circ}$ (3.8%), with respect to ITRF2008. Among these, the 10 stations in Europe showed a magnitude difference of 7.8 mm/yr (30.3%) and a direction difference of $3.7^{\circ}$ (1.0%), while the 14 stations in North America showed a magnitude difference of 2.7 mm/yr (15.8%) and a direction difference of $10.3^{\circ}$ (2.9%).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.529-534
• /
• 2006

New geocentric geodetic datum has recently been realized in Korea, Korean Geodetic Datum 2002- KGD2002, to overcome problems due to the existing Tokyo datum, which had been used in this country since early 20th century. This transition will support modern surveying techniques, such as Global Navigation Satellite Systems (GNSS) and ensures that spatial data is compatible with other international systems. For this realization, very long baseline interferometry (VLBI) observations were initially carried out in 1995 to determine the coordinates of the origin of KGD2002 based on the International Terrestrial Reference Frame (ITRF). Continuous GPS observations were collected from 14 reference stations across Korea to compute the coordinates of 1st order horizontal geodetic control points. During the campaign, GPS observations were also collected at about 9,000 existing geodetic control points. In 2006, network adjustment with all data obtained using GPS and EDM since 1975 has been performed under the condition of fixing the coordinates of GPS continuous observation stations to compute coordinate measurements of the 2nd and 3rd geodetic control points. This paper describes the GPS campaigns which have been undertaken since 1996 and details of the network adjustment schemes. This is followed