• 한국지능시스템학회논문지
• /
• 제23권1호
• /
• pp.72-79
• /
• 2013

본 논문에서는 태양광 발전시스템의 최대전력점을 추종하기 위해, 개방회로전압과 가까운 첫 번째 지역극대전력점(local peak power point)의 전압 및 전류값이 특정한 범위 내에 있을 경우, 첫 번째 지역극대점이 전역극대전력점(global peak power point)인지 판단할 수 있도록 패턴을 분석하였다. 직-병렬 어레이로 연결된 태양전지 모듈에 부분그늘문제(partial shading problem)가 발생할 경우 다수의 지역극대전력점이 관찰될 수 있어, 전역극대전력점을 찾는데 어려움이 있다. 부분선형 태양전지 모델을 이용한 태블로 해석(Tableau analysis)으로 태양전지 어레이 회로의 V-I 특성을 시뮬레이션하여 지역극대전력점과 전역극대전력점을 확인하고, 그에 해당하는 전압 및 전류 값과 V-I 특성곡선의 패턴을 분석하였다. 분석된 패턴을 통해 특정한 영역을 설정하여 첫 번째 지역극대전력점이 전역극대전력점 인지 판단하여 발전하는 경우, 첫 번째 지역극대전력점으로만 발전했을 때에 비해 효율이 향상되었다.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1566-1574
• /
• 2019

Maximum power point tracking (MPPT) under the partial shading condition is a challenging research topic for photovoltaic systems. Shaded photo-voltaic module result in complex peak patterns on the power versus voltage curve which can misguide classical MPPT algorithms. Thus, various kinds of global MPPT algorithms have been studied. These have typically consisted of partial shading detection, global peak search and MPPT. The conventional partial shading detection algorithm aims to detect all of the occurrences of partial shading. This results in excessive execution of global peak searches and discontinuous operation of the MPPT. This in turn, reduces the achievable power for the PV module. Based on a theoretical investigation of power verse voltage curve patterns under various partial shading conditions, it is realized that not all the occurrences of partial shadings require a global peak search. Thus, an intelligent partial shading detection algorithm that provides exact identification of global peak search necessity is essential for the efficient utilization of solar energy resources. This paper presents a new partial shading determinant algorithm utilizing adaptive threshold levels. Conventional methods tend to be too sensitive to sharp shading patterns but insensitive to smooth patterns. However, the proposed algorithm always shows superb performance, regardless of the partial shading patterns.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.722-732
• /
• 2014

The power-voltage (P-V) curve of photovoltaic (PV) arrays connected in parallel to bypass diodes would have several local maximum power points (LMPP) under partial shading conditions (PSC). Conventional maximum power point tracking (MPPT) methods fail to search for the global maximum power point (MPP) because the searched peak point may remain at the LMPP on the P-V curve under PSC. This study proposes an improved MPPT algorithm to ensure that PV arrays operate at global maximum power point (GMPP) under PSC. The proposed algorithm is based on a critical study and a series of observations of PV characteristics under PSC. Results show the regularity of voltage interval between LMPPs. The algorithm has the advantages of rapidly reaching GMPP, maintaining stability, and recovering GMPP quickly when the operating condition changes. Simulation and experimental results demonstrate the feasibility of the proposed algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1390-1391
• /
• 2011

태양광 발전 시스템에서의 최대 전력점 추적(MPPT, Maximum Power Point Tracking)제어를 실험을 하기 위해 부분선형 다이오드 모델을 이용한 태블로 해석을 통해 태양광 발전 시스템의 태양전지 모듈의 특성을 시뮬레이션 하였다. 태양전지 모듈의 V-I 특성과 태양전지 패널을 직렬-병렬 어레이로 연결 시, 부분 그늘 문제(Partial Shading Problem)의 지역 최대 점(global peak)을 시뮬레이션을 통해 확인하였다.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.476-489
• /
• 2017

Under partial shading conditions (PSCs), multiple maximums may be exhibited on the P-U curve of string inverter photovoltaic (PV) systems. Under such conditions, heuristic methods are invalid for extracting a global maximum power point (GMPP); intelligent algorithms are time-consuming; and model-based methods are complex and costly. To overcome these shortcomings, a novel hybrid MPPT (MPF-IP&O) based on a model-based peak forecasting (MPF) method and an improved perturbation and observation (IP&O) method is proposed. The MPF considers the influence of temperature and does not require solar radiation measurements. In addition, it can forecast all of the peak values of the PV string without complex computation under PSCs, and it can determine the candidate GMPP after a comparison. Hence, the MPF narrows the searching range tremendously and accelerates the convergence to the GMPP. Additionally, the IP&O with a successive approximation strategy searches for the real GMPP in the neighborhood of the candidate one, which can significantly enhance the tracking efficiency. Finally, simulation and experiment results show that the proposed method has a higher tracking speed and accuracy than the perturbation and observation (P&O) and particle swarm optimization (PSO) methods under PSCs.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1805-1818
• /
• 2018

This paper proposes a novel hybrid maximum power point tracking (MPPT) algorithm combining a Whale Optimization Algorithm (WOA) and the conventional Perturb & Observation (P&O) to track/extract the highest amount of power from a solar photovoltaic (SPV) system working under partial shading conditions (PSCs). The proposed hybrid algorithm is based on a WOA which predicts the initial global peak (GP) and is followed by P&O in the final stage to achieve a quicker convergence to a GP. Thus, this hybrid algorithm overcomes the computational burden encountered in a standalone WOA, grey wolf optimization (GWO) and hybrid GWO reported in the literature. The conventional algorithm searches for the maximum power point (MPP) in the predicted region by the WOA. The proposed MPPT technique is modelled and simulated using MATLAB/Simulink for simulating an environment to check its effectiveness in accurately tracking the MPP during the GP region. This hybrid algorithm is compared with a standalone WOA, GWO and hybrid GWO. From the simulating results, it is shown that the proposed algorithm offers high tracking performance and that it increases the output power level of a SPV system under partial shading. The algorithm also verified experimentally on various PSCs.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.136-137
• /
• 2017

Maximum power point tracking (MPPT) under partial shading condition (PSC) is a challenging process in the PV array system. The shaded PV panel makes different peak patterns on the P-V curve and misguides the MPPT algorithm. Various kinds of global MPP (GMPP) detecting algorithms are used to overcome this issue. Generally, too frequent execution of GMPP tracking algorithm reduces the achievable power of PV panel due to time spent on the scanning process. Thus, partial shading detection algorithm is essential for efficient utilization of solar energy source. While conventional method only detects fast shading patterns, the proposed algorithm always shows superb performance regardless of the speed of partial shading patterns.

• Structural Engineering and Mechanics
• /
• 제53권4호
• /
• pp.703-723
• /
• 2015

In this paper optimization of volume fraction distribution in a thick hollow cylinder with finite length made of two-dimensional functionally graded material (2D-FGM) and subjected to steady state thermal and mechanical loadings is considered. The finite element method with graded material properties within each element (graded finite elements) is used to model the structure. Volume fractions of constituent materials on a finite number of design points are taken as design variables and the volume fractions at any arbitrary point in the cylinder are obtained via cubic spline interpolation functions. The objective function selected as having the normalized effective stress equal to one at all points that leads to a uniform stress distribution in the structure. Genetic Algorithm jointed with interior penalty-function method for implementing constraints is effectively employed to find the global solution of the optimization problem. Obtained results indicates that by using the uniform distribution of normalized effective stress as objective function, considerably more efficient usage of materials can be achieved compared with the power law volume fraction distribution. Also considering uniform distribution of safety factor as design criteria instead of minimizing peak effective stress affects remarkably the optimum volume fractions.

• 수산경영론집
• /
• 제42권2호
• /
• pp.113-130
• /
• 2011

The laver has been cultivated long time ago by Korea and Japan. Korean Laver Industry has been influenced by Japan on the many factors since 20th. Nevertheless now the both country showed widening disparities across the aspect of total Laver Industry each other. The development steps of Korea and Japan Laver Industry have been advanced differently. That is, we can keep the Laver Industry development steps of both countries separate by 4 steps. But insignificant of every step against both countries has been dissimilar. We can separate from 4 steps in Korea, 1 step is origin period from beginning of laver cultivation to 1961. Next step is First Development period from 1962 to 1978. This period come out production increase from about 10,000 tons early 1960 to 50,000 tons late 1970. Next step is Second Development period from 1979 to 2000. This period come out eminent production increase from about 50,000 tons early 1980 to 200,000 tons late 1990. Next step is Stabilization period from 2001 to now. This period come out production control the size of its production and enlargement of Laver Export. We can also separate from 4 steps in Japan, 1 step is origin period from beginning of laver cultivation to 1944. Next step is Development period from 1945 to 1975. This period come out production increase from about 4 billion sheets early 1960 to 8.5 billion sheets 1975. Next step is Peak period from 1976 to 1982. This period come out sustainable production peak by 6~8 billion sheets and high price. Next step is Decline period from 1983 to now. This period come out production control the size of its production and sustainable price down. These differences showed out facing problems of Korean and Japanese Laver Industry differently. In case of Korea, the facing problems show out 3. First is structural problem, for example, trouble between original laver producer and the finished producer by dry laver products. Second is Insufficiency of Plants Protection System. Third is low quality of Laver. In case of Japan, the facing problems also show out 3. First is sustainable decrease of laver consumption. Second is change of mind against laver, for example, the change of the propensity to consume, and decrease of brand power. Third is Influence of global system. The difference of development steps of Korea and Japan Laver Industry show out 2 point of view to us. First we need consider positive strategy against laver production system of enlargement. Second, we need consider separate strategy against high quality laver and low quality laver.

• 광물과 암석
• /
• 제35권3호
• /
• pp.333-344
• /
• 2022

화강암 및 대리석 같은 천연 건축용 석재의 채석 및 활용이 개발도상국에서 급부상하고 있다. 이러한 석재를 사용하기 위해 가공, 절단 및 치수화 과정에서 많은 양의 폐기물이 발생한다. 석재폐기물은 개방된 환경에서 처리되며, 부산물로 발생하는 폐기물의 독성이 환경과 인간의 건강에 악영향을 줄 수 있다. 2019년 세계 석재 산업 성장은 채석장 폐기물을 제외하고 1% 이상 증가한 약 155,000천톤의 새로운 기록을 달성하였다. 인구 천명당 석재 사용량(m²/1,000 inh)은 2001년 177, 2018년 266에서 2019년 268로 증가했다. 2019년 세계 총채석량은 316,000천톤(100%)이고, 생산량의 53%는 채석장 폐기물로 발생되었다. 석재가공 단계에서는 완제품 생산량이 91,150천톤(29%)에 도달했으며 결과적으로 63,350천톤이 석재폐기물이 생산되었다. 그러므로 세계적으로 채석장에서 생산된 석재가 100%이라면 전체 폐기물 발생량은 71%이다. 석재폐기물은 환경적, 경제적 및 사회적 관점에서 상당한 문제를 발생시킨다. 석재폐기물 처리는 기본적으로 3가지 방법이 있는데 재사용, 재활용 및 매립처리가 있다. 그 중에 재사용 및 재활용은 환경 친화적으로 할 수 있는 양호한 석재폐기물 관리 방법이다. 석재폐기물은 많은 사용 방법이 있지만 건축 자재, 세라믹 재료 및 환경 적용으로 요약된다. 석재폐기물을 이용한 재료 생산은 매우 유망하며 채석장과 산업 현장에서 재생되어 사용할 수 있다. 새로운 생산품(인공토양)은 토목 공사, 철도 제방 및 원형교차로 주변 표토로 사용하며, 석분토는 산성토양의 중화를 위해 사용도 가능하다. 또한 석재폐기물은 광물 잔유물 회수, 광물 성분 추출, 건설 자재, 전력 생산, 빌딩 재료와 가스 및 수질 처리에 이용할 수 있다.