• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.253-262
• /
• 2021

Global Navigation Satellite Systems (GNSS) based precise positioning using Real Time Kinematic (RTK) technique has been proposed as an enabler of the formation operation of moving vehicles. In RTK methods, the integer ambiguity of GNSS carrier phase measurements must be resolved. Although there have been many proposed algorithms for the integer ambiguity resolution, the widelane combination of carrier phase measurements and LAMBDA methods have gained the most popularity in literatures when dual frequency GNSS measurements were used. In this paper, we evaluated five alternative methods to determine relative positions of moving base and rover receivers; the round-off scheme of widelane carrier phase, instant least-squares and Kalman filter-based LAMBDA with widelane carrier phase, instant least-squares and Kalman filter-based LAMBDA with dual frequency measurements. The paper presented the performance of each method using flight test data, which showed their strength and weakness in the aspects of time-to-first-fix, ambiguity resolution success ratio, and relative position errors. Based on that, we provided practical recommendations of RTK operations for moving vehicles.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.314-320
• /
• 2016

Inertial navigation system (INS) has used aided systems and sensors to compensate navigation error. Global navigation satellite system (GNSS), velocity measurement sensor (VMS), and radar are commonly used to aid INS. Land navigation system (LNS) also mainly uses VMS when GNSS cannot be used such as at tunnel or on jammed scenario. A straight drive is required when VMS-aided navigation is used, because there is only speed of straight direction whereas no crossways and vertical directions. In local environment, even an expressway has lack of straight drive which is constraint of VMS-aided navigation algorithm. This paper proposes an enhanced VMS-aided navigation algorithm for LNS with indirect drive by restricting filter update condition. Also, there is a result of vehicle test to prove performance of the proposed algorithm.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.385-390
• /
• 2006

This paper examines the sampling and jitter specifications and considerations for Global Navigation Satellite Systems (GNSS) software receivers. Software radio (SWR) technologies are being used in the implementation of communication receivers in general and GNSS receivers in particular. With the advent of new GPS signals, and a range of new Galileo and GLONASS signals soon becoming available, GNSS is an application where SWR and software-defined radio (SDR) are likely to have an impact. The sampling process is critical for SWR receivers, where it occurs as close to the antenna as possible. One way to achieve this is by BandPass Sampling (BPS), which is an undersampling technique that exploits aliasing to perform downconversion. BPS enables removal of the IF stage in the radio receiver. The sampling frequency is a very important factor since it influences both receiver performance and implementation efficiency. However, the design of BPS can result in degradation of Signal-to-Noise Ratio (SNR) due to the out-of-band noise being aliased. Important to the specification of both the ADC and its clocking Phase- Locked Loop (PLL) is jitter. Contributing to the system jitter are the aperture jitter of the sample-and-hold switch at the input of ADC and the sampling-clock jitter. Aperture jitter effects have usually been modeled as additive noise, based on a sinusoidal input signal, and limits the achievable Signal-to-Noise Ratio (SNR). Jitter in the sampled signal has several sources: phase noise in the Voltage-Controlled Oscillator (VCO) within the sampling PLL, jitter introduced by variations in the period of the frequency divider used in the sampling PLL and cross-talk from the lock line running parallel to signal lines. Jitter in the sampling process directly acts to degrade the noise floor and selectivity of receiver. Choosing an appropriate VCO for a SWR system is not as simple as finding one with right oscillator frequency. Similarly, it is important to specify the right jitter performance for the ADC. In this paper, the allowable sampling frequencies are calculated and analyzed for the multiple frequency BPS software radio GNSS receivers. The SNR degradation due to jitter in a BPSK system is calculated and required jitter standard deviation allowable for each GNSS band of interest is evaluated. Furthermore, in this paper we have investigated the sources of jitter and a basic jitter budget is calculated that could assist in the design of multiple frequency SWR GNSS receivers. We examine different ADCs and PLLs available in the market and compare known performance with the calculated budget. The results obtained are therefore directly applicable to SWR GNSS receiver design.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.3
• /
• pp.289-294
• /
• 2023

As technologies such as cameras, Laser Imaging, Detection, and Ranging (LiDAR), and Global Navigation Satellite Systems (GNSS) become more sophisticated and common, their use in autonomous driving technologies is being explored in various fields. In the maritime area, technologies related to collision avoidance between ships are being developed to evaluate and avoid the risk of collision between ships by setting various scenarios. However, the position of each vessel used in the process of developing collision avoidance technology between vessels uses data obtained through GNSS, and may include a position error of 10 m or more depending on the situation. In this paper, a study on the dynamic safety navigation range including the positional inaccuracy of the ship is conducted. By combining the concept of the protection level obtained using GNSS raw data with a conventional safe navigation range, a safer navigation range can be calculated for dynamic navigation. The calculated range is verified using data obtained while sailing in an actual sea environment.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2022

Global Navigation Satellite System (GNSS) provides location information using signals from multiple satellites. However, a spoofing attack that forges signals or retransmits delayed signals may cause errors in the location information. To prevent such attacks, authentication protocols considering the navigation message structure of each GNSS can be used. In this paper, we analyze the authentication protocols of Global Positioning System (GPS), Galileo, and BeiDou, and compare the performance of Navigation Message Authentication (NMA) of the above systems, using several performance indicators. According to our analysis, authentication protocols are similar in terms of performing NMA and using Elliptic Curve Digital Signature Algorithm (ECDSA). On the other hand, they are different in several ways, for example, whether to perform Spreading Code Authentication (SCA), whether to use digital certificates and whether to use Timed Efficient Stream Loss-tolerant Authentication (TESLA). According to our quantitative analysis, the authentication protocol of Galileo has the shortest time between authentications and time to first authenticated fix. We also show that the larger the sum of the navigation message bits and authentication bits, the more severely affected are the time between authentications and the time to first authenticated fix.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.5
• /
• pp.602-611
• /
• 2015

Even though GNSS provides highly accurate navigation information all over the world, it is vulnerable to jamming in the electronic warfare due to its weak signal power. The United States and Korea have plans to use terrestrial navigation systems as back-up systems during outage of GNSS. In order to develop back-up systems of GNSS, an M&S software platform is necessary for performance evaluation of various vehicle trajectories and integrated navigation systems. In this paper a design method of an M&S software is proposed for evaluation of multiple radio positioning integration systems. The proposed M&S software consists of a navigation environment generation part, a navigation algorithm part, a GUI part and a coverage analysis part. Effectiveness of the proposed design method is shown by implementing an M&S software for the GPS, DME and eLoran navigation systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.566-572
• /
• 2011

The satellite communication is an important method for maritime communications. Binary offset carrier (BOC) signal is a promising candidate of next generation global navigation satellite systems (GNSS). Synchronization of BOC signal is one of the most important processes to demodulate BOC signal in GNSS. However, in maritime environment, the synchronization of BOC signal is suffered from the problem of side-peak of BOC autocorrelation function and multipath fading caused by the sea surface reflection. In this paper, we proposed a novel synchronization scheme which can eliminate side-peak perfectly and is robust in multipath channel. Simulation results show that the proposed scheme has better performance than conventional schemes in multipath channel.

• 한국항공운항학회:학술대회논문집
• /
• 2015.11a
• /
• pp.92-97
• /
• 2015

본 논문은 CNS/ATM의 항공감시 업무(Surveillance)의 내용을 소개하고 있다. ICAO(International Civil Aviation Organization)가 권고한 GNSS(Global Navigation Satellite System)기반의 인프라 구축 및 연구개발을 포함하는 내용의 글로벌 항공계획(Global Air Navigation Plan: GANP) 개념을 기반으로 미국과 유럽에서 현재 진행되고 있는 차세대 감시시스템의 최근동향 및 운용개념 수립과 관련 연구개발 진행 현황을 정리하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.9
• /
• pp.977-983
• /
• 2014

A repeat-back jamming signal is an intentionally re-broadcasted GNSS (Global Navigation Satellite System) interference. In this paper, a novel repeat-back jamming detection scheme is proposed. The proposed scheme uses a combined pseudo random noise signal (C-PRN) and is available for a generic GNSS receiver with a single antenna. The C-PRN signal is made by combining several received pseudo random noise signals that had been transmitted from the visible GNSS satellites. Through a Monte-Carlo simulation, the detection probability of a repeat-back jamming signal detected with the proposed scheme is presented.