• 한국세라믹학회지
• /
• 제36권5호
• /
• pp.490-496
• /
• 1999

The sintering behavior of LTCC (low temperature cofired ceramics) chip couplers was investigated in relation with Ag diffusion at the interface of glass ceramic substrate-Ag electrode. Sintering temperature was in the range of 825$^{\circ}C$-975$^{\circ}C$. The commercial green sheet and silver electrode were used. Below 875$^{\circ}C$ the diffusion of the Ag ion into the substrate and the penetration of glassy phases into the electrode occurred due to an increase of fluidity. Thus the lectrode line was severely deformed and damaged. At 975$^{\circ}C$ the transformation of crystalline phases into glassy phases and the melting of the Ag electrode resulted in the diffusion of the considerable amount of Ag ions.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.647-651
• /
• 2016

SiC films were prepared on glassy carbon substrates by laser chemical vapor deposition under a high pressure of $10^4Pa$ using a diode laser (wavelength = 808 nm) and a polysilaethylene precursor. (111)-oriented SiC films were formed at a deposition temperature ($T_{dep}$) range of 1150 - 1422 K. At $T_{dep}=1262K$, the SiC film with a high Lotgering factor of above 0.96 showed an exhibited pyramid-like surface morphology and flower-like grains. The highest deposition rate ($R_{dep}$) was $220{\mu}m\;h^{-1}$ at $T_{dep}=1262K$.

• 전기화학회지
• /
• 제13권2호
• /
• pp.132-137
• /
• 2010

본 연구는 KOH 전해질에서 전기화학적으로 석출된 망간 산화물이 산소 환원 반응에 미치는 전기화학적 촉매 역할에 대해 고찰하였다. 나노 사이즈 망간 산화물들은 Glassy carbon(GC), Gold(Au) 그리고 Titanium(Ti)로 이루어진 전극에 전해방식으로 석출시켰으며, 각 전극 표면에 나노 사이즈로 균일하게 분포되어 있는 것이 SEM 관찰을 통해서 확인되었다. 망간산화물의 한 종류인 $\gamma$-MnOOH는 산소 환원반응에 수반되는 4-electron 반응에서 촉매 역할을 하는 것을 확인하였다. 망간산화물이 전기화학적으로 석출된 전극들은 전해석출을 하지 않은 전극들에 비해서 양극 전위가 낮아지는 것을 확인할 수 있었다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.234-234
• /
• 2006

Novel molecular glassy POSS-based material having carbazole moiety as a photo- and electroactive group was synthesized, and its thermal, morphological, electrochemical, and optical properties were investigated. POSS having carbazole (POSS-Cz) was found to form easily amorphous glassy film by cooling the melt sample or by spin coasting onto glass substrate. POSS-Cz showed monomeric emission even in solid film, which suggests that carbazole moiety can be isolated even in solid state.

• Bulletin of the Korean Chemical Society
• /
• 제15권12호
• /
• pp.1054-1058
• /
• 1994

Different behavior on the formation of soluble intermediate was observed depending on the substrate employed during the nucleation of lead dioxide from plumbous ion using a rotating ring-disk electrode. It was found that no soluble intermediate was formed at glassy carbon electrode, while the presence of soluble intermediate could be detected at platinum substrate. From the different anodic behavior of two substrates, the formation of a probable Pb(Ⅲ) soluble intermediate was suggested. A most probable nucleation mechanism at the platinum substrate involving a second order chemical reaction was derived on the basis of rotating disk electrode experiments.

• 한국세라믹학회지
• /
• 제36권6호
• /
• pp.583-589
• /
• 1999

In the fabrication of ceramic chip couples for high frequency application such as the mobile communication equipment the formation of electrode lines and Ag diffusion were investigated with heat treatment conditions for removing organic binders. The deformation and densification of the electrode line greatly depended on the binder burnout process due to the overlapped temperature zone near 400$^{\circ}C$ of the binder dissociation and the solid phase sintering of the silver electrode. Ag ions were diffused into the glass ceramic substrate. The Ag diffusion was led by the glassy phase containing Pb ions rather than by the crystalline phase containing Ca ions. The fact suggests that the Ag diffusion could be controlled by managing the composition of the glass ceramic substrate.

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.2019-2024
• /
• 2014

NiCu alloys have been suggested as potential candidates for catalysts in glucose oxidation. In this study, NiCu alloys with different compositions were prepared on a glassy carbon substrate by changing the electrodeposition potential to examine the effect of Ni/Cu ratios in alloys on catalytic activity toward glucose oxidation. Cyclic voltammetry and chronoamperometry showed that NiCu alloys had higher catalytic activity than pure Ni and Cu catalysts. Especially, Ni59Cu41 had superior catalytic activity, which was about twice that of Ni at a given oxidation potential. X-ray analyses showed that the oxidation state of Ni in NiCu alloys was increased with the content of Cu by lattice expansion. Ni components in alloys with higher oxidation state were more effective in the oxidation of glucose.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2013년도 춘계학술대회 논문집
• /
• pp.109-110
• /
• 2013

Medium carbon steel was aluminized by hot dipping into molten Al or Al-1%Si baths. After hot-dipping in these baths, a thin Al-rich topcoat and a thick alloy layer rich in $Al_5Fe_2$ formed on the surface. A small a mount of FeAl and $Al_3Fe$ was incorporated in the alloy layer. Silicon from the Al-1%Si bath was uniformly distributed throughout the entire coating. The hot dipping increased the microhardness of the steel by about 8 times. Heating at $700-1000^{\circ}C$ however decreased the microhardness through interdiffusion between the coating and the substrate. The oxidation at $700-1000^{\circ}C$ in air formed a thin protective ${\alpha}-Al_2O_3$ layer, which provided good oxidation resistance. Silicon was oxidized to amorphous silica, exhibiting a glassy oxide surface.

• 분석과학
• /
• 제7권2호
• /
• pp.181-186
• /
• 1994

Poly(3-methylthiophene) 전도성 막전극을 이용해서 벗김 전압-전류법으로 Ag의 분석 가능성을 연구하였다. 막전극 표면에 존재하는 18-crown-6은 수용액에서 Ag(I)을 착화에 의해서 흡수하고 이 Ag(I)은 제한된 전위 범위의 순환 전압-전류법에 의해서 막전극 속으로 이동하여 유리질 탄소전극에서 산화-환원된다. 따라서 막전극은 Ag(I)의 침투를 용이하게 하기 위해서 적당한 두께의 다공성으로 제조되어야 한다. 이러한 실험 결과를 바탕으로 수용액에서 $5.0{\times}10^{-6}M$의 Ag(I)을 검출할 수 있었다.

• Journal of Welding and Joining
• /
• 제17권4호
• /
• pp.53-59
• /
• 1999

Amorphous alloys have also been called glassy alloys or non-crystalline alloys. They are made by the rapid solidification. The solidification occurs so rapid that the atoms are frozen in their liquid configuration. There are unique magnetic, mechanical, electrical and corrosive behaviors which result form their amorphous structure. In the study. amorphous coatings were manufactured with Ni-Cr-B-Si powders by flame spray. Measurement of hardness, were resistance, corrosion resistance and observation of microstructures and XRD, DSC were performed to investigate characteristics of amorphous coatings. The experimental results obtained as follow: 1) Amorphous powders could not be manufactured with the spraying in the spraying in the liquid nitrogen. But, amorphous coatings could be manufactured with the rotation cooling method by liquid nitrogen. In the fabrication of amorphous coatings, major factor was the rapid cooling by rotation of the substrate. 2) Hardness of coatings was obtained Hv 960 by formation of amorphous phase. But, wear resistance decreased. That was due to porosity in the coatings by the rapid cooling. 3) In the case of corrosion resistance, amorphous coatings were superior to air-cooled coatings. That was due to formation of amorphous phase. 4) After amorphous coatings were heat-treated at 520℃ for 1hr. hardness increased 80% and wear resistance increased 30% comparing with air cooled coatings. These were due to crystallization of amorphous phase and decrease of porosity by heat-treatment.