• 한국소음진동공학회논문집
• /
• 제22권11호
• /
• pp.1099-1105
• /
• 2012

Transparent noise barrier panels have the advantages of transmitting light to nearby residents and allowing drivers to orientate themselves by providing views of the surrounding area. To develop guidelines on quality criteria for transparent soundproof panels, their sound transmission loss and weatherability were experimentally investigated. In Korea, the sound transmission loss of noise barrier panels should be more than 25 dB at 500 Hz and 30 dB at 1000 Hz. The transmission loss tests of transparent panels were performed in accordance with KS F 2808. Typically, plastic materials suffer from color changes when exposed to ultraviolet(UV) light over extended periods. Therefore, weathering of plastics is one of the most important properties for outdoor applications. Protection against UV radiation and weathering is usually accomplished by using UV stabilizer additives or coatings. Transparent materials for soundproof panels were examined through accelerated weathering tests and their weathering resistances were evaluated from changes in yellowness index.

• Structural Engineering and Mechanics
• /
• 제39권3호
• /
• pp.303-316
• /
• 2011

Experimental tests have shown that glass exhibits very different strengths when tested under biaxial and uniaxial conditions. This paper presents a study on the effects of biaxial stresses on the notional ultimate strength of glass. The study involved applying the theory of elasticity and finite element analysis of the Griffith flaw in the micro scale. The strain intensity at the tip of the critical flaw is used as the main criterion for defining the limit state of fracture in glass. A simple and robust relationship between the maximum principal stress and the uniaxial stress to cause failure of the same glass specimen has been developed. The relationship has been used for evaluating the strength values of both new and old annealed glass panels. The characteristic strength values determined in accordance with the test results based on 5% of exceedance are compared with provisions in the ASTM standard.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.373-376
• /
• 2008

New glass compositions for lead free, low temperature sealing glass frit was examined in $ZnO-V_2O_5-P_2O_5$ glass system which can be used sealing material for PDP to be made of soda lime glass substrates. Among many glass compositions, KFS-C glass showed low glass transition point (Tg) and good fluidity and adhesion characteristics when it was tested by flow button method at low temperature of $420^{\circ}C$. Its Tg was $317^{\circ}C$ and thermal expansion coefficient (CTE) was $70{\times}10^{-7}/K$. The glass frit was mixed with an organic vehicle to make a paste and it was dispensed and sealed with soda lime glass substrates at $420^{\circ}C$ for 10min. Sealed glass panels also showed good adhesion strength even sealed at low temperature of $420^{\circ}C$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.408-411
• /
• 2004

Color filter is a fundamental and necessary component to make a full-color TFT-LCD, its quality intensively influence the performance of TFT-LCD in the application of Notebook Computer, Monitor and Television. Color filter in chromaticity also make an effect for human visual system and video enjoyment. Recently, mother glass size is enlarged for demand of large-size panels and new generation color .filter technology for large-size liquid crystal cell panels is also developed. Here, latest generation color filter technology in TFT-LCD will be discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.42-45
• /
• 2002

Small sized LTPS TFT-LCDs are developed and evaluated. Sine the fabrication process is optimized for the productivity of huge glass substrate, the pattern size is above 5${\mu}m$. The panels with integrated digital data drivers are not satisfactory to compete with a-Si technology. Therefore, LTPS panels are implemented by PMOS technology and it is proved that they can be competitive with a-Si TFT-LCDs in terms of performance and cost.

• 한국전기전자재료학회논문지
• /
• 제30권3호
• /
• pp.170-174
• /
• 2017

In 3 electrode reflective displays using a plastic substrate, unstable packaging induces particle clumping and optical degradation due to external air inflow and electronic ink evaporation. In this work, we fabricate 3 electrode electronic paper using glass wafer, ITO/plastic film, and ITO/glass/gas barrier film as an upper substrate after injecting electronic ink onto the lower substrate. Then, we studied its properties. After operating under stress conditions for 336 hours at $85^{\circ}C$ and 75% humidity, the reflectivity of driven e-paper panels with white color was 25.5% for the panels using glass wafer, 22.5% for plastic film including a gas barrier layer, and 16% for plastic film only. From these optical properties, we conclude that gas barrier film improves upper film isolation as a desirable packaging method.

• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.1001-1007
• /
• 2006

In this paper we present robust optimal supporting positions for large glass panels used for TFT-LCD monitors when they are stored in a cassette during manufacturing process. The criterion taken is to minimize their maximum deflection. Since they are supported by some supports and have large deformations, contact analysis with a geometrically nonlinear effect is necessary. In addition, the center of a panel can not be positioned exactly as intended and should be considered as uncertainties. To take into account of these effects, the mean and the standard deviation of system response functions, particularly the deflection of the panels, need be calculated. A function approximation moment method (FAMM) is utilized to estimate them. It is a special type of response surface methodology for structural reliability analysis and can be efficiently used to estimate the two stochastic properties, that is, the system performance and the perturbations caused by uncertainties. For a design purpose, they are to be minimized simultaneously by some optimization algorithm to obtain robust optimal supporting positions.

• Advanced Composite Materials
• /
• 제18권1호
• /
• pp.1-20
• /
• 2009

This paper describes the results of experiments and numerical simulation studies on the impact and indentation damage created by low-velocity impact subjected onto honeycomb sandwich panels for application to the BIMODAL tram. The test panels were subjected to low-velocity impact loading using an instrumented testing machine at six energy levels. Contact force histories as a function of time were evaluated and compared. The extent of the damage and depth of the permanent indentation was measured quantitatively using a 3-dimensional scanner. An explicit finite element analysis based on LS-DYNA3D was focused on the introduction of a material damage model and numerical simulation of low-velocity impact responses on honeycomb sandwich panels. Extensive material testing was conducted to determine the input parameters for the metallic and composite face-sheet materials and the effective equivalent damage model for the orthotropic honeycomb core material. Good agreement was obtained between numerical and experimental results; in particular, the numerical simulation was able to predict impact damage area and the depth of indentation of honeycomb sandwich composite panels created by the impact loading.

• 한국화재소방학회논문지
• /
• 제23권6호
• /
• pp.39-45
• /
• 2009

본 연구에서는 샌드위치패널의 종합적인 화재특성을 파악하기 위하여 스티로폼, 난연 스티로폼, 우레탄폼, 난연 우레탄폼, 그라스울 샌드위치패널에 대해 국제 화재 시험 규격인 ISO 9705 시험(Full-scale room test)을 실시하였다. 이를 바탕으로 EN 13501-1 및 Eurefic Research Program에서 제시하고 있는 분류기준에 적용하여 샌드위치패널의 종합적인 화재특성을 분석하였다. 그 결과 그라스울 샌드위치 패널은 A class, 난연 우레탄폼과 난연 스티로폼 샌드위치 패널은 B class로 나타났다. 플래시오버가 발생한 스티로폼, 우레탄폼 샌드위치 패널은 E class 로 나타났다.

• 한국산학기술학회논문지
• /
• 제22권4호
• /
• pp.403-412
• /
• 2021

단열패널(표면재, 심재, 마감재로 구성되어 있으며 경량성, 저가성 및 시공성 등의 장점)의 화재난연성과 적용건축물 강화에도 불구하고, 화재발생 건수와 피해 영향은 지속적으로 증가하고 있다. 본 연구에서는 단열패널 종류별이격거리에 따른 열영향(온도변화, 점화가능성, 내·외부 연소흔, 심재의 형상 변화)을 평가하고자 국내에서 사용빈도가 높은 EPS 패널, 글라스울 패널, 석고보드 패널의 3종을 선택하였다. 패널에는 지면으로부터 수직(30 cm, 90 cm, 150 cm)으로 온도센서를 설치하였고, 적층한 각목을 화원으로 패널로부터 각각 0 cm, 25 cm, 50 cm 이격거리를 변화시키면서 점화시켰다. 실험 결과, 최고온도는 EPS 패널에서 349 ℃를 나타내었고, 패널의 내·외부 형상변화는 이격거리 25 cm를 임계점으로 하부에서 중부까지 높이로 국한되었다. 또한 연소흔은 평균 500 s 이후에서 나타났고, 화재강도가 큰 EPS 패널에서는 광폭의 U자형 패턴, 글라스울과 석고보드 패널에서는 중폭 또는 협폭의 V자형 패널을 형성하였다. 도출된 정보를 통해 단열 패널로 구성된 건축물로부터 화재위험성 평가와 화재감식의 검증에 필요한 유용한 정보를 제공하고자 한다.