• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.913-920
• /
• 2013

This paper presents an applicable basic design that can configure non-contact levitation table for conveying a large sheet of glass. The suggested air levitation table consists of a series of air chambers with porous pads and fans as the conveyor system. The air supply chambers are arrayed to supply an adequately strong upward airflow for supporting the glass. Levitation is controlled by the size and discharge velocity, of the chamber arrays, as well as the glass supporting height. After pre-evaluation of the glass rigidity and the filer functional performance, a one-way fluid structure interface (FSI) analysis is performed for predicting pressure and deflection working of the 8G glass in the transverse and longitudinal directions, respectively. After comparing calculated levels of flatness of the glass, it determines the chamber array for the linear non-contact conveying motion.

• Journal of Korean Society for Atmospheric Environment
• /
• 제10권E호
• /
• pp.325-331
• /
• 1994

Organic extracts of diesel- exhaust particulates were analyzed for mutagenicity using Ames Salmonella typhimurium assay system. An experimental diesel microbus used was drived on the chassis dynamometer according to CVS-75 mode. The samples were taken from the mixed gases in a dilution tunnel. With a high-volume air sampler equipped with double filter holders, particulate matters were collected on a teflon-coated glass fiber filter placed behind a activated carbon filter. After ultrasonic extraction with benzene- ethanol and evaporation to dryness, the residue was dissolved in dimethylsulfoxide. Each sample was tested toward 2 strains, TA100 and TA98 by the pre-incubation method in the absence and presence of S-9mix. Average concentration of diesel- exhaust particulates was about 116.6mg/m$^3$, and 44.1~62.2 ％ to the total weight of particulates, consisted of organic matters. The mutagenicities of diesel- exhaust particulate organic matters were 4,512 and 2,205 revertants/m$^3$ toward TA100 without and with S-9mix, respectively. Those toward TA98 were 13,367 and 3,715 revertants/m$^3$, respectively.

• 한국레이저가공학회지
• /
• 제10권2호
• /
• pp.5-15
• /
• 2007

A new printing process for LCD color filter is proposed in this work by using the localized laser heating, which is called laser-induced spray printing (LISP) process. The LISP is a non-contact process, which injects the ink from the donor substrate to the glass substrate by the bubble pressure induced by laser heating. The temperature distribution of the donor substrate is calculated numerically to explain the ink ejection phenomena. The composition of the ink was includes the red pigment, n-butanol, xylene, BCA and epoxy. Experiments were conducted by using the fiber laser system, and the color filter patterns were deposited successfully under the proper laser heating conditions.

• 한국세라믹학회지
• /
• 제45권7호
• /
• pp.423-429
• /
• 2008

Ceramic Fiber separator is the promising material for thermal battery system because it reduces the production cost and offers the potential to a new application compared to a pellet type electrolyte. The molten salt electrolytes for thermal battery were prepared by the impregnation of the commercial glass filters such as GF-A, C and F (Whatman, USA) with two types of molten-lithium salts, LiCl-KCl and LiK-LiBr-LiF. The wetting properties were evaluated by wetting balance test and wetting angle measurement. The wetting behaviors were strongly affected by the composition of the molten salts and the pore structure of the glass separators. The optimum wetting conditions for maximum loading and effective retention of the molten electrolyte were also studied.

• Korean Chemical Engineering Research
• /
• 제43권6호
• /
• pp.691-695
• /
• 2005

종이 필터, 면섬유, 유리섬유 필터 등과 같은 지지체 위에 이차성장 수열합성법에 의하여 제올라이트 박막을 제조하였다. 먼저, 제올라이트 종자로 사용하기 위하여 제올라이트 NaA(${\approx}0.5{\mu}m$)와 silicalite-1(${\approx}0.2{\mu}m$) 결정들을 합성하였고, 이 결정들을 지지체의 표면에 화학결합을 이용하여 부착시켰다. 종자 결정으로 덮힌 지지체 위에 NaA나 silicalite-1 제올라이트 박막이 생성되었으며, 제조된 박막은 주사형 전자현미경으로 관찰하였고, X-ray 회절로 분석하였다.

• 한국대기환경학회지
• /
• 제12권3호
• /
• pp.341-350
• /
• 1996

We determined 6 polycyclic aromatic hydrocarbons (PAHs) fluranthene, pyrene, benz(a)anthracene, chrysene, benzo(a)pyrene, dibenzo(a,h)anthracene). A total of 129 samples has been collected from September 1990 to September 1994 on 2 different types of filters (quartz fiber filter, glass fiber filter) by a PM-10 high volume air sampler at the Kyung Hee University-Suwon campus. The organic components in the PM-10 were extracted by an ultrasonication process with benzene:ethanol(4:1, v/v) prior to the analysis by using a GC/FID. We had also investigated the decaying quantity of 6PAHs at the room temperature. For example, chrysene was decayed by 56.7% after 4 days and benzo(a)anthracene by 84.2% after 30 days. All of PAHs were almost completely decayed after a year. We extensively estimated the decay rates by regression analyses for existing 18 raw data sets. Based on the decay rate constants $(\beta)$, pyrene was rapidly decayed by 19.0 $\times 10^{-2}$/day; on the other hand, dibenzo(a,h)anthracene slowly by 0.7 $\times 10^{-2}$/day. Applying the decay rates of PAHs on stored and dated samples, we could reasonably determine annual and seasonal concentration average of PAHs in particulate matters smaller than 10 $\mu$m.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.635-642
• /
• 2013

We have prepared a DEMO conveyor device for conveying a large 8G class glass sheet using ahorizontal air-cushion system. This device consists of the body frame and the driving frame that are combined to realize a frame for conveying glass without any contact.The driving frame comprises an air flotation table (bed), drive roller supported at both ends, and ASU. Part of the ASU serves to control the airflow as the chamber consists of a porous pad and fan. Fiber filters replace the porous pad and axial fans serve as an air compressor. In addition, to determine the appropriate glass levitation from the air table, this study examined the design specifications of the applied filter (discharge speed of HEPA and ULPA filters, and flow rate) as well as the height of the and the proper supporting roller height (14mm). Then, after adjusting the position of the ASU and the number of ASUs required to configure the UNIT air floating C/V, we analyzed the height and flatness of the glass and derived the appropriate layout (1140-mm distance between ASUs).

• 한국대기환경학회지
• /
• 제27권2호
• /
• pp.201-208
• /
• 2011

Recently, a real-time, pocket-sized aethalometer (microAeth$^{(R)}$ model AE51) has been developed by Magee Scientific Inc. for measuring the concentration of black carbon in the atmosphere. In this study, two aethalometers, models AE-16 and AE-51, which measure the optical absorption of carbon particles at infrared 880 nm, were operated at time interval of 5-min between January 9 and February 10, 2010 at an urban site of Gwangju, to compare the accuracy of black carbon (BC) concentrations reported from the AE-51 model and to investigate reasonable sampling time of filter media in the AE-51. The air samples in the AE-51 and AE-16 models are collected on T60 (Teflon coated glass fiber) filter media (filter spot area: 0.07 $cm^2$) and quartz fiber roll-tape filter (filter spot area: 1.67 $cm^2$), respectively. Real-time measurement results indicate that when the filters were clean, the AE-51 BC was greater than or similar to the AE-16 BC data. However as the filter spots become darker, the AE-16 BC concentrations were higher than the AE-51 BC data and the difference in the BC concentrations from two AE models becomes gradually increased. Relative error in the AE-51 and AE-16 BC concentrations showed significance difference depending on used time of the filter in the AE-51 model, weather pattern, levels of air pollution, etc, ranging from 11.5% (used time of the filter in AE-51: 1,595 min) to 52.5% (used time of the filter in AE-51: 2,085 min). When considering the used time of one filter ticket in the AE-51 model and difference (or relative error %) between AE-16 and AE-51 BC concentrations, it is recommended that the standard sampling time per one filter ticket within the AE-51 model be less than approximately 24 hr (1,440 min) under the normal weather conditions except for severe haze and mist events.

• 한국환경보건학회지
• /
• 제22권2호
• /
• pp.32-42
• /
• 1996

This study was performed to evaluate accuracy and precision of filter method and impinger method for analyzin airborne isocyanates in mixture (2, 6-TDI, HDI, 2, 4-TDI, MDI). Filter method was performed using the OSHA Method 42 and impinger method using the NIOSH Method 5521. The samples were analyzed by high performance liquid chromatography-ultraviolet detector (HPLC-UVD). After the optimum operating conditions for each method were investigated, samples with various concentration levels were quantified at the conditions. The precision was expressed by the pooled coefficient of variation(C.V.) and the accuracy by overall accuracy. The results are summarized as follows: 1. The optimum condition of filter method was determined at 35/65 ACN/buffer (0.01 M ammonium acetate) in mobile phase. And in case of impinger method, it was at 30/70 ACN/buffer(0.2 M sodium acetate). The effect of concentrations of acetate on the separation of the peaks was not significant, but, the effect of ACN/buffer ratio was significant. 2. The correlation coefficients for the two methods were above 0.9 in all isocyanate compounds. Average recovery efficiencies for 2, 6-TDI, HDI, 2, 4-TDI and MDI in filter method were 92.4%, 102.6%, 87.3% and 101.0%, respectively. Those in impinger method were 106.6%, 106.7%, 99.0% and 103.6%, respectively. As a result, the recovery efficiency of impinger method was higher than those of filter method in analyzing isocyanate compounds. 3. The pooled coefficients of variations of the methods were slightly higher than expected. The overall accuracies of the methods were within $\pm 25%$ for each isocyanate compound. Since these results satisfy NIOSH criteria, the accuracy of the experiment is appropriate. 4. As seen above, impinger method is more efficient than filter method. But, there are many disadvantages in impinger method. Therefore, solid sorbent such as a glass fiber filter must be developed in order to have the high efficiency not less than that of impinger method in the future.

• 한국광학회지
• /
• 제17권3호
• /
• pp.285-289
• /
• 2006

광섬유형 콜리메이터와 광 진행 경로의 수직 방향으로 삽입된 주기적으로 식각된 줄무늬(stripe) 평판에 의해 진행하는 빔의 일부에 광 경로차를 유도하는 마이크로 옵틱형 마하젠더 간섭형 필터를 제안하고 구현하였다. 제안된 마이크로 옵틱 필터는 주기적으로 식각된 줄무늬(stripe) 구조의 평판을 빔 경로에 삽입하여 측방향 정렬에 무관하게 특정 소멸비 값 이상의 특성을 구현할 수 있으며, 식각된 박막의 두께를 조정함으로써 원하는 대역폭 및 주기의 전달특성을 가지는 필터를 구현할 수 있다. 네거티브 포토레지스터인 SU-8을 기반으로 줄무늬(stripe) 구조의 주기적으로 식각된 평판을 제작하였으며 이를 이용하여 구현된 필터의 소멸비는 측방향 정렬에 무관하게 30 dB이상의 값을 가진다. 제작된 필터의 FSR(Free Spectral Range)은 장파장 대역에서 약 237 nm이고 그리고 삽입손실은 2 dB 미만의 값을 가진다. 통과대역에서의 PDL(Polarisation Dependent Loss)값은 0.15 dB 미만이다.