• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.30-34
• /
• 2011

In this study, the effects of the electron beam irradiation on the thermal behavior and the abrasion properties of the glass fiber reinforced nylon 12 was investigated. The electron beam irradiation was carried out over a range of irradiation dose from 100 to 600 kGy with additive crosslinking agents such as triallyl cyanurate (TAC), triallyl isocyanurate (TAIC) and trimethylolpropane trimethacrylate (TMPTMA) for enhancing the crosslinking effects. The gel contents were increased dramatically above 200 kGy. It was verified that the degree of crosslinking depends on the radiation dose. The decreases of the melting temperature and the area of endothermic peak were observed as increasing the absorbed dose in the results of DSC analysis. The enhanced thermal stability was confirmed by the increases of decomposition temperature by electron beam irradiation. Furthermore, the negative deviations of the abrasion loss and the abrasion coefficients confirmed the improvement of the abrasion properties of irradiated nylon 12, as evidenced by SEM observation on the abrasion surfaces. The addition of the crosslinking agents to nylon 12 during effectively improved the thermal behavior and the abrasion properties of nylon 12 by the electron beam irradiation.

• The Journal of the Korea Contents Association
• /
• v.22 no.10
• /
• pp.733-741
• /
• 2022

Among the various evidence found in maritime crimes, fingerprints and DNA are very important in that they can identify a suspect. In this study, 5 types of non-porous surfaces (plastic, stainless, glass, ceramic, FRP), which are often found as evidence in the actual marine environment, were selected, and latent and blood fingerprints were passed down and immersed at the Donghae Maritime Police Station's exclusive pier for about 7 days. After that, DNA extraction, quantification, and STR profile were analyzed after fingerprint developing CA fumming method and 4 powder methods (Swedish black powder, Concentrated black powder, Supranano red powder, Dazzle orange powder). Among the fingerprint developing methods, when Supranano red powder was applied, a relatively high amount of DNA was found. As a result of STR profile analysis, an average of 16.8 to 9 loci were secured, and all 20 were confirmed in glass and ceramic materials. As a result of the study, it was possible to secure the STR profile by extracting and quantifying DNA after applying the fingerprint developing method to virtual evidence immersed for about 7 days, and further research is needed to secure the STR profile by analyzing DNA after applying various fingerprint developing methods such as VMD and SPR.

• Journal of the Korea Concrete Institute
• /
• v.25 no.2
• /
• pp.187-194
• /
• 2013

Fiber reinforced polymer (FRP) has been gathering interest from designers and engineers for its possible usage as a replacement reinforcement of a steel reinforcing bar due to its advantageous characteristics such as high tensile strength, non-corrosive material, etc. Since it is manufactured with various contents ratios, fiber types, and shapes without any general specification, test results for concrete members reinforced with these FRP reinforcing bars could not be systematically used. Moreover, since investigations for FRP reinforced members have mainly focused on short-term behavior, the purpose of this study is to evaluate long-term behaviors of glass FRP (GFRP) reinforcing bar and concrete beams reinforced with GFRP. In this paper, test results of tensile and bond performance of GFRP reinforcing bar and creep behavior are presented. In the creep tests, results showed that 100 years of service time can be secured when sustained load level is below 55% of tensile strength of GFRP reinforcing bar. A modification factor of 0.73 used to calculate long-term deflection of GFRP reinforced beams was acquired from the creep tests for GFRP reinforced concrete beams. It is expected that these test results would give more useful information for design of FRP reinforced members.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.2
• /
• pp.260-267
• /
• 2000

Giant cell interstitial pneumonia. a synonym for hard metal pneumoconiosis, is a unique form of pulmonary fibrosis resulting from an exposure to hard metal dust. A case of biopsy-proved giant cell interstitial pneumonia in the absence of appropriate history of exposure to hard metal dust is reported. The patient presented with clinical features of chronic interstitial lung disease or idiopathic pulmonary fibrosis. He worked in a chemical laboratory at a fertilizer plant, where he had been exposed to various chemicals such as benzene and toluene. He denied having any other hobby in his house or job at work, which may have exposed him hard metal dust. High-resolution CT scan revealed multi-lobar distribution of ground glass opacity with peripheral and basal lung predominance. The retrieved fluid of bronchoalveolar lavage contained asbestos fiber and showed neutrotphil predominance. Surgical lung biopsy was performed for a definite diagnosis. Lung specimen showed alveolar infiltration of numerous multinucleated giant cells with mild interstitial fibrosis. Upon detailed examination of the lung tissue, one asbestos body was found. An analysis for mineral contents in lung tissue was performed. Compared with the control specimen, the amount of cobalt and several hard metal components in the lung tissue of this patient was ten times higher. We speculated that the inconsistency between occupational history and the findings of pathologic and mineralogical analyses could be explained by the difference in individual immunologic reactivity to hard metal dust despite the relatively small amount of unrecognized environmental exposure(ED: It's hard to understand what this phrase is trying to say).