• 방사성폐기물학회지
• /
• 제6권3호
• /
• pp.171-178
• /
• 2008

중 저준위 방사성폐기물 유리화 실증시설의 고온필터(HTF)시스템에 금속필터를 도입하여 일련의 성능시험을 수행하였다. 고온필터시스템의 여과재는 총 19개의 필터 element로 구성되는데 필터로서 금속 재질별 특성을 알기 위해 316L, 904L, Inconel 600 등 3종의 element를 혼합하여 필터set를 구성하였다. 매 시험을 종료한 후에는 필터하우징에서 종류별로 필터 element를 꺼내어 육안으로 변화를 관찰하였다. 그 결과 일부 element 표면에서 어두운 색깔의 반점들이 관찰되었으며, 특히 AISI 316L 재질의 element에서 많은 반점들이 발견되었다. 이 반점들이 부식을 의미하는 것인지 확인하기 위해 두 가지 분석을 수행하였다. 첫째 재질별로 1개씩의 element를 절단하여 정상적인 곳과 반점이 있는 곳의 표면 및 단면을 SEM/EDS로 분석하였다. 그 결과 반점은 Na, S, Si 등 무기계 산화물이 집중적으로 침적되어 필터의 미세기공을 막고 있는 현상으로 밝혀졌으며, 이 침적물들은 폐기물 및 유리용탕으로 부터 휘발된 물질로 판단된다. 둘째, 재질별로 필터 element에 대해 ring tensile시험을 수행하였다. 그 결과 반점을 포함한 시험 필터 element의 인장강도 값이 규정값 이상으로 나타나서 필터에 부식이 없는 것으로 확인되었다. 앞서 두 가지 분석결과로 볼 때 시험한 금속필터 표면에 생성된 반점은 부식생성물이라기 보다는 필터 전단으로부터 유입된 무기산화물 필터기공을 막고 있는 현상으로 판단되며, 이 반점이 반점형태로 국부적 지점에만 나타나는 것은 시험 중단시기 필터에 응축된 수분과 관련이 있는 것으로 판단된다. 반점의 생성은 필터의 유효 여과면적이 줄어 결과적으로 필터에 걸리는 압력손실이 커지기 때문에 필터하우징의 상시보온을 통한 응축 방지가 필요할 것으로 판단된다. 아울러, 보다 장시간의 시험을 통해 필터 부식현상에 대한 검증 필요하다고 판단된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.129-131
• /
• 1995

In order to investigated the effects of crystal stucture in electrical breakdown of plyethylene film, Low molecular materials in polyethylene are removed by the method as follow Polyethylene was dissolved in xylene and filtered through a glass fiber filter, And then, a polyethyene thin films of thickness 0.4~1.4$\mu\textrm{m}$ are prepared with heat treatment from solution casting. To evaluate the performance of PE film. Electrical breakdown of PE film as measured on M(Al)-I(PE)-M(Al) systemes.

• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1604-1611
• /
• 2003

The experimental investigation of a coal splitter used in the 500㎿(e) boilers of fossil power plant is carried out to validate the design criteria. To predict air flow and the amount of particles at the exit, velocity and the weight of particles are measured on test planes using the coal splitter model with two-dimensional phase doppler particle analyzer and the glass fiber filter. It is found that the position of guide plate influences significantly both flow rates of gas and particle at the exit. Gas flow rate was a linear function of the guide plate, whereas particle flow rate was a exponential function of it.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.993-996
• /
• 2001

In the composition of 0.16BaO-0.15(Nd$\_$0.87/,Bi$\_$0.13/)$_2$O$_3$-0.69TiO$_2$$.$Glass [EG-2782] 3wt% addition sintered at 1080$^{\circ}C$, we could obtained microwave properties of dielectric constant $\varepsilon$$\_$r/= 80.1, quality factor Q ${\times}$ f = 810 (at 3.5 GHz]) and temperature coefficient of resonant frequency $\tau$$\_$f/ = -1.3 [ppm/$^{\circ}C$]

• Fibers and Polymers
• /
• 제5권1호
• /
• pp.68-74
• /
• 2004

This work presents a series of experimental tests on new practical approaches in membrane design to improve extraction capacity and rate. We chose an extraction system involving Aliquat 336 as the extractant and Cd(II) as the metal ion to be extracted to demonstrate these new approaches. The core element in the new membrane assembly was the extractant loaded sintered glass filter. This membrane assembly provided a large interface area between the extractant and the aqueous solution containing metal ions. By recycling the aqueous solution through the membrane assembly, the extraction rate was significantly improved. The membrane assembly also offered good extraction capacity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.17-19
• /
• 2008

An advanced TFT-LCD structure was proposed to increase aperture ratio (AR). In this structure, metal layers formed below the data lines are used as light-blocking layers, achieving higher AR ratio than that of a conventional structure. Since average misalignment between the metal light-blocking layers and pixel electrodes is smaller than that of black matrixes on color filter glass, substantially less light-blocking areas are needed to achieve misalignment margin. The AR of the LCD panel fabricated by using proposed structure was enhanced by 18.7 % over that of the conventionally structured panel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.810-813
• /
• 2003

Application of inorganic silica-neodymia alloy films grown by sputtering technology to the dielectric layer of plasma display panel (PDP) is presented. The experimental results reveal that dielectric constant of the alloy films increases with neodymia concentration. Also, the alloy films act as band rejection color filter owing to sharp absorptions originating in the intratransition within the 4f shell of the $Nd^{3+}$ ion. In the optical band pass region, the transmittances of the alloy films show higher than those of commercial glass-like dielectrics. As a result, the luminance of PDP device with the alloy dielectric layer is higher than that of device with conventional dielectrics, indicating wider color gamut and higher color purity.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권8호
• /
• pp.995-999
• /
• 2014

In this paper, a new size-reduction approach for branch-line coupler is introduced which uses parallel end-shorted coupled lines with lumped capacitors. The characteristic of the new design was analyzed using even-odd mode method, and simulated on HFSS before fabricated on the FR4 epoxy glass cloth copper-clad plat (CCL) PCB substrate at center frequency of 1 GHz. The electrical length of transmission line was reduced to 15 degrees, therefore the size of branch-line coupler was largely reduced approximately maintaining the same characteristic around the stable center frequency. The insertion loss of the branch-line coupler filter was -4.39 dB. The size of the overall hybrid is $20mm{\times}20mm$. Measurements results were well agreed with the simulated ones.

• 펄프종이기술
• /
• 제34권2호
• /
• pp.13-21
• /
• 2002

A new method for measuring fiber length and fiber coarseness was developed using image analysis technique. Measured fibers were transferred to a glass slide on a filter paper placed on a wire of the laboratory paper machine. After staining the fibers on the slide, mean fiber lengths and coarseness were measured by a commercial image analysis software, named KS400. The resultant data obtained from the image analysis displayed a close correlation with those from FS-200 and also showed excellent reproducibility as well as those from FS-200. The length of synthetic fibers over 10 mm long could be readily measured by this new analysis technique. Finally, a substantial improvement in precision for measuring fiber length and coarseness was made with less operator's effort for a given time.

• 센서학회지
• /
• 제20권1호
• /
• pp.46-52
• /
• 2011

In this paper, the swept source-optical coherence tomography system using frequency domain mode locked(FDML) laser has realized. The FDML swept source laser showed 55.03 kHz sweeping speed, 125 nm sweeping range, and 9 mW output optical power, which are the superiority of FDML laser compared to previous swept source lasers. Also, through the cross-sectional image captured at 5 frames per second for a mirror, a 1 mm-thickness glass plate, and a thumb bottom, the performance of the system has demonstrated.