• 수산해양교육연구
• /
• 제12권2호
• /
• pp.164-175
• /
• 2000

Port facilities and marine structures used in marine environment were encountered to corrosion damages because of the influence of Cl-. Generally, to protect these accidents, anti-corrosion paint and epoxy coating have been used. But they were still remained erosion-corrosion damage like impingement erosion, cavitation erosion and deposit attack. It is necessary to develope the new composite lining material in order to protective those corrosion damages. In this paper, polyester glass flake, vinylester glass flake lining and epoxy coating for SS400 were investigated by the electrochemical polarization test and the impingement-cavitation erosion test for corrosion behaviour under the sea water. The main results obtained are as follows ; 1) Epoxy coating appear potentiodynamic polarization behaviour, but polyester glass flake and vinylester glass flake lining do not appear potentiodynamic polarization behaviour. 2) Open circuit potential of polyester glass flake lining is more noble than that of epoxy coating and corrosion current density of polyester glass flake lining is less drained than that of epoxy coating in sea water. 3) Open circuit potential of vinylester glass flake lining is more noble than that of polyester glass flake lining and corrosion current density of vinylester glass flake lining is less drained than that of polyester glass flake lining in the sea water.

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.90-95
• /
• 2000

Today fiber composite materials are routinely used in such wide applications as ships automobiles aircraft space vehi-cles containers sporting goods and appliances. The current knowledge of machining glass fiber reinforced polyester com-posites unfortunately is inadequate for its optimum utilization in many applications. Therefore This paper deals with drilling characteristic of glass fiber reinforced polyester composites. In the drilling of glass fiber reinforced polyester the quality of the cut surfaces is strongly dependent on the drilling parameters. drilling tests were carried out on glass fiber reinforced polyester using standard HSS tools. The material containing random chopped strand fibers and woven roving was fabricated by hand lay-up The entrance and exit surface of the holes was examined. The cutting force was also mea-sured to analyze the drilling characteristics,.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.359-365
• /
• 2000

Port facilities and marine structures used in marine environment were encountered to corrosion damages because of the influence of $Cl^-$. Generally, to protect these accidents, mainly applied anti-corrosion paint and epoxy coating. But it was still remained erosion-corrosion damage such as impingement erosion, cavitation erosion, deposit attack. There was needs to develope the new coating materials to protective those corrosion damages. This paper, polyester glass flake, vinylester glass flake lining and epoxy coating for SS were investigated electrochemical tests and cavitation erosion test for corrosion behaviour under sea water. The main results obtained are as follows, 1) Surface of epoxy coating appear erosion pin hole but surface of polyester glass flake and vinylester glass flake lining do not appear erosion pin hole after impingement-cavitation erosion test in sea water. 2) Weight loss of polyester glass flake and vinylester glass flake lining do not occur after impingement-cavitation erosion test in sea water. 3) Corrosion current density of polyester glass flake lining less drained than epoxy coating and substrate under corrosion potential.. 4) Corrosion current density of vinylester glass flake lining with three coating less drained than that of polyester glass flake lining with two coating.

• Korean Chemical Engineering Research
• /
• 제50권1호
• /
• pp.30-34
• /
• 2012

선박용 부품에 적용할 수 있는 고분자 소재를 개발하기 위한 연구의 일환으로, 폴리에스테르 수지의 인장강도에 미치는 실리카와 절단 유리섬유의 영향을 조사하였다. 실리카와 절단 유리섬유의 첨가량 및 표면 개질에 사용된 커플링제의 농도를 변화시키면서 실험을 수행하였다. 표면 개질을 수행하지 않은 경우, 유리섬유의 첨가량이 증가하면 인장강도가 증가하였으나, 실리카는 첨가량이 증가할수록 인장강도가 감소하였다. 커플링제를 사용하여 첨가제의 표면을 개질하면 인장강도에 긍정적인 효과를 나타내었으며, 개질된 실리카와 절단 유리섬유를 혼합 첨가하면 인장강도의 증가에 상승효과를 나타내는 것을 알 수 있었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.377-380
• /
• 1999

The experimental investigating is mainly focused on the hole machining characteristics of glass fiber reinforced polyester at different surface conditions, cutting conditions and machining methods. The entrance and exit surface holes of the glass fiber reinforced polyester is observed and the surface photographs of drilled holes is showed. The cutting force is also measured.

• Fibers and Polymers
• /
• 제5권1호
• /
• pp.25-30
• /
• 2004

The present paper reports the impact of thermal treatment on the characteristics of core-sheath type hybrid technical yarns. The core-sheath type hybrid yams are prepared using DREF-III technology. Polyester and glass multifilaments are used as core components whereas the cotton and polyester staple fibers are the sheath components wrapped around the core filament with different proportions to form a hybrid structure. The thermal treatment is carried out both in dry and in wet state under relaxed condition and the thermal shrinkage, sheath-slipping resistance and tensile and bending properties of hybrid yarns have been studied. Thermal treatment markedly increases the thermal shrinkage and sheath-slipping resistance of hybrid yarns with polyester multifilament in core, but insignificant effect for yarns with glass multifilament in core. Breaking elongation of hybrid yams with polyester multifilament in core increases with treatment temperature. The hybrid yarns with glass multifilament in core are least affected by thermal treatment.

• 한국재료학회지
• /
• 제2권2호
• /
• pp.133-142
• /
• 1992

E-glass/Polyester 적층복합재료의 인공해수중에서의 인장특성을 알아보기 위해 PH를 각각 6.0, 8.2, 10.0으로 조절한 가운데 저 변형율 인장시험($1{\times}10^{-4}~1{\times}10^{-7}sec^{-1}$)을 행하였다. 대기와 인공해수중에서 인장하중을 받은 시험된 복합재료는 strain rate가 감소할수록 인장특성이 저하되며 $1{\times}10^{-7}sec^{-1}$의 strain rate에서 약간의 강성저하가 관찰되었다. 한편 인공해수중의 인장특성은 PH값에 따라 약간의 변화를 보였다.

• 폴리머
• /
• 제24권4호
• /
• pp.459-468
• /
• 2000

유리 또는 아라미드 섬유를 보강재로 사용한 섬유강화 복합재료의 기계적 물성을 증진시키기 위하여 복합재료 적층판을 서로 다른 매트릭스 수지와 섬유를 선정하여 이들의 인장, 굴곡 특성을 조사하였다. 불포화 폴리에스테르와 개질된 표면의 아라미드 섬유 복합재료의 경우, 굴곡 물성의 최대값은 실란 농도가 0.5 wt%일 때 관찰되었다. 불포화 폴리에스테르 수지와 유리섬유 복합재료의 인장 물성은 vinylester계가 가장 높게 나타났으며, 굴곡물성은 isophthalic계가 가장 높은 물성을 나타내었다. 유리섬유와 불포화 폴리에스테르 수지 복합재료의 기계적 물성을 증진시키기 위해 겹침 적층판과 기계적 물성과의 상관 관계에 대해서도 연구가 병행되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.797-803
• /
• 2001

The on-line cure monitoring of fiber reinforced thermosetting resin matrix composite material was performed for the better quality and productivity during manufacturing. Since the dissipation factor measured by dielectrometry method is dependent on the degree of cure and temperature of resin, in this study, a new method to obtain the degree of cure during on-line cure monitoring for glass/polyester composites was developed by employing a combination function of the temperature and the dissipation factor. Two sensor signals from a K-type thermocouple and an interdigitated dielectric sensor were processed during curing process under various cure cycles. The DSC (Differential Scanning Calorimetry) data was also used for the reference of degree of cure.

• 한국안전학회지
• /
• 제16권1호
• /
• pp.88-93
• /
• 2001

본 연구에서는 복합소재인 GFRP(Glass Fiber Reinforced Polyester)의 2차원 절삭공정에서 절삭 메커니즘과 소재의 신뢰도 및 안전성과 밀접한 관련이 있는 표면정도를 중심으로 한 공정의 특성화를 시도하고, 주파수 분석에 관하여도 논의한다. 구체적으로는, 공정중 발생하는 절삭력 신호를 AR(Autoregressive) 모델링하여 해석에 사용한다. 특히, 특징추출과정을 통해 AR계수로 이루어진 패턴벡터 중 다양한 절삭 메카니즘에 민감한 계수만 선택할 수 있다. 이들 계수와 절삭 메커니즘과의 실험적 관계를 설정함으로써 섬유경사각(Fiber orientation angle), 절삭 변수 그리고 공구형상이 절삭 메커니즘에 미치는 영향을 평가하였다.