• Korean Journal of Food Science and Technology
• /
• v.41 no.1
• /
• pp.106-110
• /
• 2009

In order to reduce the bitter taste and improve the bioavailability of red ginseng extract(RGE), inclusion complexes (RGE-CD) of the extract with ${\alpha}-,\;{\beta}-,\;{\gamma}$-cyclodextrin were prepared and studied for their sensory quality and bioavailability compared to RGE. By complexation, the bitter taste-reducing efficacies of ${\alpha}$-CD and ${\beta}$-CD were much lower than that of ${\gamma}$-CD. In comparative sensory analysis for the bitter taste, RGE-${\gamma}$-CD10, prepared using 10%(w/w) of ${\gamma}$-CD, showed a score of 1.93(decreased by about 78%) compared to RGE as the control. In addition, in sensory analysis for flavor, RGE-${\gamma}$-CD10showed a score of 5.60. Upon increasing the amount of ${\gamma}$-CD to 15%(w/w) and 20%(w/w), respectively, the bitter taste of RGE-${\gamma}$-CD was removed and the flavor of RGE disappeared(scores of 2.67 and 1.67, respectively). Therefore RGE-${\gamma}$-CD10 was chosen as an optimum. The same dosages of RGE and RGE-${\gamma}$-CD10 were orally administered to SD(Sprague-Dawley) rats on a saponin basis, and the plasma concentrations of ginsenoside Rg1 and Rb1 were measured over time to estimate the average AUC(area under the plasma concentration versus time curve) of the ginsenosides. After the oral administration, there were no significant differences in the AUC values of the RGE and RGE-${\gamma}$-CD 10 groups for ginsenoside Rg1. However, AUC values for ginsenoside Rb1 were $25.8{\mu}g{\cdot}hr/mL$ in the RGE group and $81.5{\mu}g{\cdot}hr/mL$ in the RGE-${\gamma}$-CD 10 group, respectively. Therefore, the bioavailability of ginsenoside Rb1 in the RGE-${\gamma}$-CD 10 group was significantly higher by up to 315% compared with that in the RGE group(p = 0.0029). These results show that the bitter taste of RGE can be simultaneously removed by the complexation of RGE and ${\gamma}$-CD(RGE-${\gamma}$-CD) along with increased bioavailability.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.2
• /
• pp.162-165
• /
• 2005

A series of fluorine and hydroxyl containing jasmonate derivatives, which were chemically synthesized in our institute, were investigated for their effects on the biosynthesis and heterogeneity of ginsenosides in suspension cultures of Panax notoginseng cells. Com-pared to the control (without addition of elicitors), $100{\mu}M$ of each of the jasmonate was added on day 4 to the suspension cultures of P. notoginseng cells. It was observed that, jasmonates greatly enhanced the ginsenoside content and the ratio of Rb group to Rg group (i.e. $(Rb_1\;+\;Rd)/(Rg_1\;+\;Re)$ in the P. notoginseng cells. Some of the synthetic jasmonates, such as pentafluoropropyl jasmonate (PFPJA), 2-hydroxyethyl jasmonate (HEJA) and 2-hydroxye-thoxyethyl jasmonate (HEEJA), could promote the ginsenoside content to $2.55\;\pm\;0.11,\;3.65\;\pm\;0.13\;and\;2.94\;\pm\;0.06$mg/100 mg DW, respectively, compared to that of $0.64\;\pm\;0.06$mg/100 mg DW for the control and $2.17\;\pm\;0.04$ mg/100 mg DW by the commercially available methyl jasmonate (MJA); and they could change the respective Rb:Rg ratio to $1.60\;\pm\;0.04,\;1.87\;\pm\;0.01\;and\;1.56\;\pm\;0.05$, compared to that of $0.47\;\pm\;0.01$ for the control and $1.42\;\pm\;0.06$ by MJA. The results suggest that suitable esterification of MJA with fluorine or hydroxyl group could in-crease the elicitation activity to induce plant secondary metabolism. The information obtained from this study is useful for hyper-production of heterogeneous products by plant cell cultures.

• Journal of Ginseng Research
• /
• v.37 no.1
• /
• pp.124-134
• /
• 2013

The authentication of the physico-chemical properties of ginsenosides reference materials as well as qualitative and quantitative batch analytical data based on validated analytical procedures is a prerequisite for certifying good manufacturing practice (GMP). Ginsenoside Rb1 and Rg1, representing protopanaxadiol and protopanaxatriol ginsenosides, respectively, are accepted as marker substances in quality control standards worldwide. However, the current analytical methods for these two compounds recommended by Korean, Chinese, European, and Japanese pharmacopoeia do not apply to red ginseng preparations, particularly the extract, because of the relatively low content of the two agents in red ginseng compared to white ginseng. In manufacturing fresh ginseng into red ginseng products, ginseng roots are exposed to a high temperature for many hours, and the naturally occurring ginsenoside Rb1 and Rg1 are converted to artifact ginsenosides such as Rg3, Rg5, Rh1, and Rh2 during the heating process. The analysis of ginsenosides in commercially available ginseng products in Korea led us to propose the inclusion of the (20S)- and (20R)-ginsenoside Rg3, including ginsenoside Rb1 and Rg1, as additional reference materials for ginseng preparations. (20S)- and (20R)-ginsenoside Rg3 were isolated by Diaion HP-20 adsorption chromatography, silica gel flash chromatography, recrystallization, and preparative HPLC. HPLC fractions corresponding to those two ginsenosides were recrystallized in appropriate solvents for the analysis of physico-chemical properties. Documentation of those isolated ginsenosides was achieved according to the method proposed by Gaedcke and Steinhoff. The ginsenosides were subjected to analyses of their general characteristics, identification, purity, content quantification, and mass balance tests. The isolated ginsenosides showed 100% purity when determined by the three HPLC systems. Also, the water content was found to be 0.534% for (20S)-Rg3 and 0.920% for (20R)-Rg3, meaning that the net mass balances for (20S)-Rg3 and (20R)-Rg3 were 99.466% and 99.080%, respectively. From these results, we could assess and propose a full spectrum of physico-chemical properties of (20S)- and (20R)-ginsenoside Rg3 as standard reference materials for GMP-based quality control.

• Analytical Science and Technology
• /
• v.11 no.6
• /
• pp.436-439
• /
• 1998

Ginseng saponins were analysed using reversed-phase high performance liquid chromatography with several columns. The optimum conditions were as following : reverse phase column; Novapak $C_{18}$ ODS column ($3.9mm{\times}150mm$, $5{\mu}m$), acetonitrile/water binary mobile phase gradient controller system, solvent flow rate; 1.5 mL/min, and UV (203 nm) detector. The complete separation of ginsenoside $Rb_1$, $Rb_2$, Rc, Rd, Re, Rf and $Rg_1$ was achieved within 50 min. The regression coefficients of the calibration curves for seven ginsenosides were 0.98~0.99.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.4
• /
• pp.271-275
• /
• 2011

In this study, ginseng flower water extracts were analyzed to set up the ginsenoside content and quality optimization condition. The highest total ginsenoside content among the ginseng flower water extracts was 67.44mg/g which was extracted at $85^{\circ}C$ for 3 hours. In addition, the ginsenoside content decreased according to the increased extraction temperature and time. The highest total content of $Rb_2$ and Re was 37.42mg/g at $75^{\circ}C$ for 6 hours. Total content of $Rb_2$ and Re decreased according to the increased extraction temperature and time. The highest prosapogenin ($Rg_2$ + $Rg_3$ + $Rh_1$) content among the total of ginseng flower water extracts was 18.58mg/g which was extracted at $95^{\circ}C$ for 12 hours. The sweetness, absorbance were increased according to the increased extraction temperature and time. But pH was decreased according to the increased extraction time.

• Near Infrared Analysis
• /
• v.1 no.2
• /
• pp.45-48
• /
• 2000

The effective component Ginsenoside in Ginseng has been widely used to cure some hypochondriasis and be as supplementary medicines. There are many chemical analysis methods to measure the contents of Ginsenoside in Ginseng; however, all these methods have some shortcomings such as long time, environmental pollution and damaging the samples. In this paper, it is possible to use near infrared spectroscopy to measure the content of Ginsenoside in Ginseng without destruction. As the results, Rg1, Rb1, Re and T-Saponin of Ginsenoside can be measured with the accuracy of R(0.81) SEP (1.704 mg/g), R(0.74) SEP (1.211 mg/g), R (0.78) SEP (1.049 mg/g) and R(0.84), SEP(4.537 mg/g).

• Journal of Microbiology and Biotechnology
• /
• v.27 no.7
• /
• pp.1233-1241
• /
• 2017

The ginsenoside Rh2 has strong anti-cancer, anti-inflammatory, and anti-diabetic effects. However, the application of ginsenoside Rh2 is restricted because of the small amounts found in Korean white and red ginsengs. To enhance the production of ginsenoside Rh2-MIX (comprising 20(S)-Rh2, 20(R)-Rh2, Rk2, and Rh3 as a 10-g unit) with high specificity, yield, and purity, a new combination of enzymatic conversion using the commercial enzyme Viscozyme L followed by acid treatment was developed. Viscozyme L treatment at pH 5.0 and $50^{\circ}C$ was used initially to transform the major ginsenosides Rb1, Rb2, Rc, and Rd into ginsenoside F2, followed by acid-heat treatment using citric acid 2% (w/v) at pH 2.0 and $121^{\circ}C$ for 15 min. Scale-up production in a 10-L jar fermenter, using 60 g of the protopanaxadiol-type ginsenoside mixture from ginseng roots, produced 24 g of ginsenoside Rh2-MIX. Using 2 g of Rh2-MIX, 131 mg of 20(S)-Rh2, 58 mg of 20(R)-Rh2, 47 mg of Rk2, and 26 mg of Rh3 were obtained at over 98% chromatographic purity. Then, the anti-cancer effect of the four purified ginsenosides was investigated on B16F10, MDA-MB-231, and HuH-7 cell lines. As a result, these four rare ginsenosides markedly inhibited the growth of the cancer cell lines. These results suggested that rare ginsenoside Rh2-MIX could be exploited to prepare an anti-cancer supplement in the functional food and pharmaceutical industries.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.8
• /
• pp.1194-1200
• /
• 2010

This study was carried out to investigate the compositional changes of ginsenosides and phenolic acids of ginseng leaf by fermentation in order to promote the utilization of ginseng leaf. The chief ginsenosides in non-fermented ginseng leaf (NFGL) were ginsenoside-Rg1 (26.0 mg/g), -Re (47.3 mg/g) and -Rd (23.9 mg/g). By fermentation, ginsenoside-Rg1, -Rb1, -Rb2, -Rb3, -Rc and -Re were decreased tremendously and new ginsenoside-Rh2, -Rh1, -Rg2 and -Rg3 appeared. Especially, ginsenoside-Rg3 (3.7 mg/g) on FGL was increased 15-fold compared to that of NFGL (0.2 mg/g). Total phenolic compound content of NFGL and FGL measured by colorimetric analysis was 350.4 and 312.5 mg%, respectively. There were 8 free and 6 ester forms of phenolic acids in NFGL. Among them, content of ferulic acid was the highest, comprised of 12.6 and 50.7 mg%, respectively. In FGL, total content of protocatechuic acid, p-hydroxybenzoic acid, and vanillic acid were increased by 28, 5 and 7.8 fold and ferulic acid was decreased greatly. Tyrosinase inhibitory activity of FGL was stronger than NFGL, while electron donating abilities of FGL were similar to NFGL.

• Journal of Ginseng Research
• /
• v.6 no.1
• /
• pp.25-29
• /
• 1982

This investigation was carried out to study the influence of pH and heat treatment on the ginsenosides in the white ginseng extract. Changes in ginsenosides (Rb1, Rb2, ,Rc, Rd) and free sugar were measured by the peak area variation of HPLC chromatogram during 25 hours heat treatment at the various level of pH. It was found that :(1) The peak areas of Rb1. Rb2, Rc and Rd on the HPLC chromatogram were decreased remarkably below pH 4.0 and more decrease was found as the temperature and heating time increased. (2) Those of glucose and arabinose were increased remarkably. It is considrered that the increase of glucose and the formation of arabinose result from the hydrolysis of ginsenoside( Rb1, Rb2, Rc, Rd) linked with sugars.

• Korean Journal of Medicinal Crop Science
• /
• v.9 no.1
• /
• pp.21-25
• /
• 2001

Major saponins in ginseng were analysed using reverse phase high performance liquid chromatography with binary mobile phase gradient control system instead of normal phase column. The optimum condition were as following : reverse phase column; ${\mu}{\beta}ondapak\;C_{18}$ column (Waters, $3.9mm{\times}300\;mm,\;5{\mu}m$), methyl cyanaide/water binary mobile phase gradient control system, solvent flow rate; 1.5 ml/min, and UV($203{\mu}m$ ) detector. The complete separation of ginsenoside $Rb_1,\;Rb_2,\;Rc,\;Rd,\;Re,\;Rf\;and\;Rg_1$ was achieved within 55 min. The Regression coefficients of the calibration curves for seven ginsenosides were 0.99.