• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.46-54
• /
• 1996

This study was carried out to investigate the vacuum drying characteristics of 50mm- and 75mm- thick tree disks of some domestic softwoods for substituting the conventional hardwoods as the materials for wood crafts. Though the elapsed drying times from green to in-use moisture content(MC) were largely shortened by vacuum drying, the tree disks treated by EWS couldn't be dried to in-use MC, and so sapwood stains also were occurred severely. We suggest EWS treatment is undesirable for the species with very high sapwood portion or vacuum drying with hot water circulation heating system. Heart checks were slight, but sapwood checks, which have never been trouble in drying process of tree disks, were severe. For the reasonable explanation it is suggested MC differences between sapwood and heartwood were large and most of tree disks had already no barks before drying test. Ginkgo was vacuum-dried with very slight drying defects such as heart checks, sapwood checks. V-cracks and sapwood stains. In Korean red pine and pitch pine V-cracks were severely occurred. And it was found the special feature that most of these defected tree disks contained several V-cracks within one tree disk. It can be considered as the causes that the region of sapwood was defected by the several checks at the early drying stage because of the steep MC gradient along the radial direction, and then at the later drying stage the drying stresses due to differential shrinkage were concentrated on these brittle spots.

• Journal of the Korea Furniture Society
• /
• v.28 no.4
• /
• pp.326-331
• /
• 2017

The survey of consumers' recognition of home furniture colors was conducted targeting 32 males and 68 females from 20's to 60's. The results are as follows. The first, in terms of colors, when they were asked of where was the most important place in a house, the first place they thought of was the color of wallpaper and the second was the color of furniture. The second, in terms of home furniture colors, a sofa was put the most importance on and a living room dresser was the next. The third, they preferred natural wood color as home furniture and the next color was achromatic colors. The forth, the most preferred wood color was a walnut and the next was a ginkgo tree color. The fifth, the most preferred color was white and the next was tertiary colors when they were asked to paint their home furniture. The sixth, 88% participants in the survey responded that home furniture colors would much influence on our lives. In conclusion, most consumers recognize the importance of furniture colors and they prefer the use of hardwood for a natural feeling as long as they can afford.

• Journal of the Korea Furniture Society
• /
• v.21 no.2
• /
• pp.188-195
• /
• 2010

This study has been focused on the evaluation of domestic softwood timbers to replace imported timbers for woodcrafts and furniture-making. Figures on radial and tangential sections were observed with naked eyes. As the result of study on the figures appeared on the wood surface of 6 species of trees, flat grain and edge grain were clearly found from Taxus cuspidata. Juniperus chinensis and Ginkgo biloba had wavy grain figure and pigment figure, and blister figure was found in Pinus densiflora, Larix kaempferi showed pitch streak and irregular figures on its tangential section due to growth abnormalities. Wavy grain figure appeared weakly on near knot of Pinus koraiensis. The characteristic figures shown from each species of trees are expected to be used for crafts, sculptures, furniture, and interior decoration. They are also considered to have great potential to substitute imported timber sufficiently, which are currently used a lot for wood crafts and furniture-making.

• The Korean Journal of Mycology
• /
• v.47 no.3
• /
• pp.187-197
• /
• 2019

Ascomycota is the largest phylum of the Fungi, including approximately 6,600 genera. They are often isolated from soils, indoor air, and freshwater environments, but also from plants as pathogens or endophytes. In this study, four species of Ascomycota (two of Cladosporium and one of each Daldinia and Nigrospora) were collected from the leaves of four woody plants (Camellia japonica, Ginkgo biloba, Quercus sp., Vitis vinifera). Their cultural characteristics were investigated on five different media (PDA, V8A, CMA, MEA, CZA) at 3 days after incubation at $25^{\circ}C$ in darkness. BLASTn search and phylogenetic analysis were performed using the internal transcribed spacer (ITS) rDNA sequences, in addition to tef1 gene sequences for Cladosporium species. Based on the cultural, morphological, and phylogenetic data, the isolates were identified as Cladosporium anthropophilum, Cladosporium pseudocladosporioides, Daldinia eschscholtzii, and Nigrospora chinensis. Previously, some members of Cladosporium and Nigrospora have been recorded as endophytes inhabiting the leaves and stems of various plants, whereas Daldinia eschscholtzii is a wood-inhabiting endophyte or wood-decaying fungus. To our knowledge, this is the first report of these four ascomycetes in Korea.

• Resources Recycling
• /
• v.15 no.1 s.69
• /
• pp.66-73
• /
• 2006

The effects of operation conditions, such as bed temperature, temperature rising rate, particle size, moisture content and so on, on thermo-chemical conversion of waste wood have been determined in a micro fixed bed gasifier. The samples were waste wood-chips such as pine, oak, acacia and ginkgo. The thinning timbers used as reactants in the experiments had $35wt\%$ moisture content, $0.5wt\%$ ash content and 4,550 kcal/kg heating value on a dry basis. A typical product distribution was a $40wt\%$ liquid, $20wt\%$ solid, and $40wt\%$ dry syngas. The syngas concentration was affected by operation conditions and average syngas concentration was $H_2:40vol\%,\;CO:30vol\%,\;CH_4:10vol\%$.

• Korean Journal of Environment and Ecology
• /
• v.36 no.5
• /
• pp.535-549
• /
• 2022

Damage to forests, such as broken or falling trees, has increased due to the increased intensity and frequency of abnormal climate events, such as strong winds and heavy rains. However, it is difficult to respond to them in advance based on prediction since structural defects such as cavities and bumps inside trees are difficult to identify with a visual inspection. Non-invasive sonic tomography (SoT) is a method of estimating internal defects while minimizing physical damage to trees. Although SoT is effective in diagnosing internal defects, its accuracy varies depending on the species. Therefore, it is necessary to analyze the reliability of its measurement results before applying it in the field. In this study, we measured internal defects in wood by cross-applying destructive resistance micro drilling on old Pinus densifloraSiebold & Zucc. and Ginkgo bilobaL., which are representative tree species in Korea, to verify the reliability of SoT and compared the evaluation results. The t-test for the mean values of the defect measurement between the two groups showed no statistically significant difference in pine trees and some difference in ginkgo trees. Linear regression analysis results showed a positive correlation with an increase in defects in SoT images when the defects in the drill resistance graph increased in both species.

• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.220-231
• /
• 2021

The use of digital copies of film-based analog images and the introduction of digital radiographic imaging systems using image plates gradually replace the non-destructive radiationirradiation method of Cultural Heritage. The quality of images obtained from this technique is affected by conditions such as tube voltage, tube current, and exposure time, type of image acquisition medium, distance of the artifacts from the image acquisition medium, and thickness of artifacts. In this study, we evaluated the grayscale image obtained using GE's Computed Radiograhpy (CR) imaging system, the transmission characteristics of the X-ray source for each tree type (pine, chestnut, sawtooth oak, ginkgo) used in wooden Cultural Heritage, and the signal-to-noise ratio (SNR) and contrast. The GE's CR imaging were analyzed using the Duplex wire image quality indicator, line-pair gauges.

• Applied Microscopy
• /
• v.36 no.4
• /
• pp.251-258
• /
• 2006

Crystal-bearing cells are rarely encountered in the softwoods and their regular occurrence, e.g., in species of Abies, Picea, Ginkgo, and Pinus, is of considerable diagnostic significance. Thus, this study discusses the distribution and types of crystals in North American Abies species to provide additional information for wood anatomy and identification through light and scanning electron microscopies. Prismatic crystals, elongate crystal s, and styloids are identified, in descending order of frequency, in Abies concolor, A. grandis. and A. magnifica, A. nobilis (=A. procera), A. lasiocarpa, and A. amabilis but not in A. balsamea and A. fraseri. Differently from the other species, A. lasiocarpa shows the tendency of more elongate crystals and styloids than prismatic crystals. A. concolor contains crystal sands, prismatic crystals, elongate crystals, and styloids both in the axial and ray parenchyma cells, whereas the other species show prismatic crystals, elongate crystals, and styloids only in the ray parenchyma cells. Ray parenchyma cells containing crystal sand and axial parenchyma cells having crystal sand, prismatic crystals, elongate crystals, and styloids are probably reported here for the first time in A. concolor. In conclusion, the presence or absence of crystals appears to be the most powerful diagnostic character for separating A. concolor, A. grandis, and A. magnifica from A. nobilis (=A. procera), A. lasiocarpa, A. amabilits, A. balsamea, and A. fraseri.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.8-12
• /
• 1974

1. If one unity is given to the prongs whose ends touch each other for estimating the internal stresses occuring in it, the internal stresses which are developed in the open prongs can be evaluated by the ratio to the unity. In accordance with the above statement, an equation was derived as follows. For employing this equation, the prongs should be made as shown in Fig. I, and be measured A and B' as indicated in Fig. l. A more precise value will result as the angle (J becomes smaller. $CH=\frac{(A-B') (4W+A) (4W-A)}{2A[(2W+(A-B')][2W-(A-B')]}{\times}100%$ where A is thickness of the prong, B' is the distance between the two prongs shown in Fig. 1 and CH is the value of internal stress expressed by percentage. It precision is not required, the equation can be simplified as follows. $CH=\frac{A-B'}{A}{\times}200%$ 2. Under scheduled drying condition III the kiln, when the weight of a sample board is constant, the moisture content of the shell of a sample board in the case of a normal casehardening is lower than that of the equilibrium moisture content which is indicated by the Forest Products Laboratory, U. S. Department of Agriculture. This result is usually true, especially in a thin sample board. A thick unseasoned or reverse casehardened sample does not follow in the above statement. 3. The results in the comparison of drying rate with five different kinds of wood given in Table 1 show that the these drying rates, i.e., the quantity of water evaporated from the surface area of I centimeter square per hour, are graded by the order of their magnitude as follows. (1) Ginkgo biloba Linne (2) Diospyros Kaki Thumberg. (3) Pinus densiflora Sieb. et Zucc. (4) Larix kaempheri Sargent (5) Castanea crenata Sieb. et Zucc. It is shown, for example, that at the moisture content of 20 percent the highest value revealed by the Ginkgo biloba is in the order of 3.8 times as great as that for Castanea crenata Sieb. & Zucc. which has the lowest value. Especially below the moisture content of 26 percent, the drying rate, i.e., the function of moisture content in percentage, is represented by the linear equation. All of these linear equations are highly significant in testing the confficient of X i. e., moisture content in percentage. In the Table 2, the symbols are expressed as follows; Y is the quantity of water evaporated from the surface area of 1 centimeter square per hour, and X is the moisture content of the percentage. The drying rate is plotted against the moisture content of the percentage as in Fig. 2. 4. One hundred times the ratio(P%) of the number of samples occuring in the CH 4 class (from 76 to 100% of CH ratio) within the total number of saplmes tested to those of the total which underlie the given SR ratio is measured in Table 3. (The 9% indicated above is assumed as the danger probability in percentage). In summarizing above results, the conclusion is in Table 4. NOTE: In Table 4, the column numbers such as 1. 2 and 3 imply as follows, respectively. 1) The minimum SR ratio which does not reveal the CH 4, class is indicated as in the column 1. 2) The extent of SR ratio which is confined in the safety allowance of 30 percent is shown in the column 2. 3) The lowest limitation of SR ratio which gives the most danger probability of 100 percent is shown in column 3. In analyzing above results, it is clear that chestnut and larch easly form internal stress in comparison with persimmon and pine. However, in considering the fact that the revers, casehardening occured in fir and ginkgo, under the same drying condition with the others, it is deduced that fir and ginkgo form normal casehardening with difficulty in comparison with the other species tested. 5. All kinds of drying defects except casehardening are developed when the internal stresses are in excess of the ultimate strength of material in the case of long-lime loading. Under the drying condition at temperature of $170^{\circ}F$ and the lower humidity. the drying defects are not so severe. However, under the same conditions at $200^{\circ}F$, the lower humidity and not end coated, all sample boards develop severe drying defects. Especially the chestnut was very prone to form the drying defects such as casehardening and splitting.

• Journal of the Korea Furniture Society
• /
• v.21 no.6
• /
• pp.486-498
• /
• 2010

The purpose of this study was to analyze the species of 82 furniture in the late Choseon Dynasty (mainly, 19th century), which are housed in the Seoul Museum of History. Total of 22 species were found. The species shared 43% as hard pine(Diploxylon), 9% as Zelkova serrata Makino, 7% as Paulownia spp., 7% as Tilia spp., 6% as soft pine(Haploxylon), 5% as Ginkgo biloba Linn., 4% as Cedrela sinensis A. Juss., 3% as Diospyros spp., 3% as Abies spp., 2% as Alnus spp., 2% as Picea spp., 1% as bamboo, 1% as Populus spp., 1% as Betula spp., 1% as Juglans spp. The other minor ones were Torreya nucifera Sieb. et Zucc., Pyrus spp., Castanea spp., Ulmus spp. and Kalopanax oictuse (Thunb.) Nakai. Thirty seven furniture (45% in total) was made of single species, 19 (23%) of two species, 16 (20%) of three species and 10(12%) of 4 to 6 species. For frames and panels, hard and strong woods, such as hard pines, Zelkova and Cedrela, were used. For drawer, however, light woods having low shrinkage, such as Paulownia and Tilia, were used. The origin of woods could be specified by the habitats of the species identified. Both Hwanghaedo- and Parkcheon- Chests used basswood (Tilia), which grow in the cold regions, indicating the origin of woods as North Korea.