• Journal of the Mineralogical Society of Korea
• /
• v.20 no.3
• /
• pp.223-229
• /
• 2007

The mechanism of hydrothermally synthesizing Na-A zeolite from siliceous mudstone at a $Na_2O/SiO_2$ ratio of 0.6, a $SiO_2/Al_2O_3$ 2.0 and a $H_2O/Na_2O$ 119 has been observed by IR, DTA, XRD and SEM. This mudstone is a tertiary periodic sedimentary rock and widely spreads around the Pohang area. In the early hydrothermal synthesis at $80^{\circ}C$ in an autoclave, sodium silicate and sodium aluminate were found to be preferentially reacted to generate Na-A type zeolite. Gibbsite and bayerite were also formed due to the presence of extra aluminum oxide in the feedstock. As reaction time in-creased up to 50 h, residual sodium aluminatewas reacted with siliceous mudstone, causing the Na-A zeolite crystal to grow and the hydroxylsodalite to generate. Therefore, in the $14{\sim}50\;h$ synthetic time, Na-A zeolite and hydroxylsodalite were formed. Also, if reaction time passed over 50 h, a part of the Na-A zeolite was finally redissolved and reacted with hydroxylsodalite to synthesize Na-P zeolite, generating porous surface of Na-A zeolite and disappearing hydroxylsodalite.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.4
• /
• pp.335-348
• /
• 2016

The fluvial Tamna Formation, consisting of conglomerate, sandstone and mudstone layers, is widely distributed in Jeiu Island. Various sizes of quartz crystals were identified from most of the Tamna Formation, including the mudstone layer. XRD analysis also shows that the mudstone layer is composed of various minerals, quartz, plagioclase, K-feldspar, mica, magnetite, hematite, olivine, amphibole, gibbsite, calcite, analcime and clay minerals such as illite, kaolinite, vermiculite, smectite, chlorite, $10{\AA}$-halloysite. There is a tendency showing that the more amount of kaolinite, vermiculite, and chlorite is present where the more amount of quartz crystals is present. It is likely that the main source materials contributing to the Tamna Formation were from the parental rocks containing abundant quartz grains, suggesting that the Tamna Formation could not be related to Jeju volcanic rocks, but possibly to pre-existing basement rocks. Thus, we propose that the Tamna Formation was formed from the materials derived from both pre-existing basement rocks and Jeju volcanic rocks, which were subsequently affected by diagenesis, hydrothermal alteration and weathering process.

• Economic and Environmental Geology
• /
• v.21 no.1
• /
• pp.1-15
• /
• 1988

This is a study on the mineral compositions, SK numbers of refractoriness and the genesis of the clay mineral deposits in Cheonnam Province and Handong area. 1. Jindo kaolin deposits: Chief clay minerals of the deposits are kaolinite, quartz and alunite. The SK number of the ore is from $34^+$(the highest) to 27(the lowest). On the genesis of the deposits some geologists believe that the deposits were formed by the alteration of the siliceous tuff. But the deposits seems to be formed by the hydrothermal alteration of the rhyolite lava beds. This area is formed by alternative beds of tuff; and kaoline deposits. 2. Hadong area: Chief mineralogy of Hadong kaolin area is $10{\AA}$ halloysite and kaolinite. The SK number of some of the ore is up to $36^+$. The theoretic SK number of kaolinitic composition is 35. So one of the highest alumina minerals of gibbsite is formed in the ores of $36^+$ SK numbers. 3. Hampyong kaolin deposits: Most of kaolin has black color. The chief minerals are kaolinite, quartz and muscovite. Some of the kaoline contains rutile crystals. SK number ranges from 30 to 17. The kaolin deposit is formed by the transported sedimentation in lower part of the seashore. 4. Jangsan kaoline deposits: Chief minerals of the kaolin is kaolinite, quartz and muscovite. Some kaoline contains small crystals of pyrite. This area consists almost of the tuffs. Kaolin deposits also would be formed by the alteration of the tuffs. 5. Nohwado pyrophyllite deposits: Quartz and pyrophyllite are chief minerals. SK number of the ore ranges from 32 to 30. The pyrophyllite deposits would be formed by the hydrothermal alteration of the rhyolitic lava beds. This area consists of alterative beds of tuffs and rhyolitic lavas. 6. Songsuk pyrophyllite deposits: Chief minerals are quartz, kaolinite, pyrophyllite and iron oxides. In the pyrophyllite deposits egg-like inclusions of diaspore and kaolinite in composition. This area almost consists of tuffs. Several faults are developed and along the fault the tuff would begin to alter to pyrophyllite and some parts to diaspore and kaolinite nodules by the acts of hydrothermal solution.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.2
• /
• pp.114-121
• /
• 2002

Buffer capacities for two Bo horizon soils or Andisols developed from different parent materials have been investigated. The titration curves from column leaching experiment show that buffering occurred at pH 4.0 and 6.0. The buffer intensity or soil developed from pyroclastic materials (P-soil) is higher than that from basalts (B-soil). From batch test we have found that proto-imogolite and/or imogolite may control Al solubility as well as $Al(OH) _3$in the moderate acid condition. The buffer intensities ($\beta$) of P-soils were plotted on the theoretical buffering curve of $Al(OH)_3$, while $\beta$ of B-soils approached to that of proto-imogolite, which shows the solubility of short-range-order materials in P-soil control the buffer capacity. Buffering at pH 6.0 is thought to be the result of dissolution of some silicate clays and exchange reactions between $H^{+ }$and base-forming cations. Considering the amount of annual acid precipitation, aluminum solubility of Andisols, and the low BS (Base Saturation percentage), it can be predicted that prolonged acid precipitation will reduce the buffer capacity of soils and lead to soil acidification.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.3
• /
• pp.121-137
• /
• 2000

Weathering profiles which were developed under a temperate, humid environment and relatively steep geography, show a thick saprolite and soil horiaon in the Precambrian granitic gneiss of the Yoogoo area. In the weathering profiles, secondary minerals such as interstratified biotite/vermiculite, tri- or di-octahedral vermiculite, halloysite, kaolinite, illite, smectite, gibsite and geothite were observed. Kaolinization of biotite is the most prevalent mechanism but vermiculitization is a minor from all ofweathering profiles. Biotite altered to B/V mixed layer-vermiculite, to illite and to halloysite, kaolinite and gibbsite. Halloysite is the most frequently observed weathering product of biotite in these profiles. Goethite is observed at the around or opened fissures of altered biotite. Tubular halloysite aggregates was fDrmed from dissolution-precipitation of plagioclase. The occurrence of halloysite aggregates is divided into a preferentially oriented type and a wrinkled one which were resulted from the dissolved type of plagioclase. Fe-bearing minerals have also been subjected to dissolution leaving the precipitation of geothite along dissolution voids. The profile of granitic gneiss is a typical weathering pattern showing a clay minerals increase toward the surface. Weathering of minerals were controlled by locally acidic and good-drainage environment, and formed a various and complicated secondary minerals in this study area.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.4
• /
• pp.321-331
• /
• 2003

We researched the variation of mineral composition with depth and the Cu adsorption behavior of Hwangto in the Okjong area, Hadong. The 4 Hwangto samples were collected from depth 10 cm, 25 cm, 2∼3 m and under 3 m from surface, and analyzed using the X­ray Diffractometer. The Hwangto samples were mostly composed of clay minerals such as kaolinite and halloysite. Two samples from 10 cm and 25 cm contained Fe or Al hydroxide minerals, for example goethite or gibbsite. As depth increases, the content of quartz decreases but that of kaolinite increases. The amount of Cu removal was rapidly rised from pH 4, and reached about 90％ at pH 6 and above 90％ at pH 7. It is regarded that the trend of Cu removal was affected by the difference in mineral composition. It was relatively well matched between experimental value and calculated value by MINTEQA2 program in the case of high Cu concentration. From this study the precipitation has important role for the removal of Cu ions, particularly in the case of high Cu concentration. However, it was discord between experimental value and calculated one in the dilute concentration circumstances. The reason may be the mistake in parameters, insufficient reaction time, and inadequate consideration of reaction site in mineral surface.

• The Journal of Engineering Geology
• /
• v.15 no.1
• /
• pp.9-17
• /
• 2005

A set of soil samples were picked up from a failed slope formed by rainfall in limestone zone in Jangseong-gun, Jeonnam, Korea, to find out its physical and mechanical characteristics for this study, and variation of safety factor depending on slope inclination was defined by analysing slope stability affected by rainfall. Decomposed limestone soil in the research area is composed of quartz, orthoclase, gibbsite, geothite, etc., with specific gravity of 2.73, and this soil is included in SC by unified soil classification system. Calcium ingredient decreased remarkably during weathering at its mother rock. Coefficient of permeability is 2.56×10/sup -4/ cm/ sec, similar to its value of silty clay. Cohesion decreases remarkably from 3.0 t/ ㎡ to 0.72 t/ ㎡, and Φ value of internal friction angle tends to decrease as it turns to be saturated soil from partial saturated soil in the shear test. To analyze slope stability affected by rainfall, it is reasonable to seek seepage depth with reference to rainfall＊ intensity. In the slope stability analysis, when the seepage depth is the larger, its safety factor is the less, which makes the slope unstable. Comparing with minimum safety factor, 1.5 of cut slope in consideration of the seep-age line, safety factor is found to be satisfactory only when inclination of cut slope of decomposed limestone soil is more than 1：1.2 slope at least considering rainfall. It is also found that decrease of cohesion has great effect on decline of safety factor of slope while partial saturated soil turns to be saturated soil.

• Economic and Environmental Geology
• /
• v.35 no.1
• /
• pp.13-23
• /
• 2002

The chemical compositions of groundwaters from the granite areas mainly belong to Ca-HC0$_{3}$ and Na-HC0$_{3}$type, and some of these belong to Ca-(CI+S0$_{4}$) and Na-(CI+S0$_{4}$) type. Spring waters and groundwaters from anorthosite areas belong to Ca-HC03 and Na-HC03 type, respectively. The result of reaction path modeling shows that the chemical compositions of aqueous solution reacted with granite evolve from initial Ca-CI type, via CaHC0$_{3}$ type, to Na-HC0$_{3}$ type. The result of rain water-anorthosite interaction is similar to evolution path of granite reaction and both of these results agree well with the field data. In the reaction path modeling of rain watergranite/anorthosite reaction, as a reaction is progressing, the activity of hydrogen ion decreases (pH increases). The concentrations of cations are controlled by the dissolution of rock-forming minerals and precipitation and re-dissolution of secondary minerals according to the pH. The continuous addition of granite causes the formation of secondary minerals in the following sequence; gibbsite plus hematite, Mn-oxide, kaolinite, silica, chlorite, muscovite (a proxy for illite here), calcite, laumontite, prehnite, and finally analcime. In the anorthosite reaction, the order of precipitation of secondary minerals is the same as with granite reaction except that there is no silica precipitation and paragonite precipitates instead of analcime. The silica and kaolinite are predominant minerals in the granite and anorthosite reactions, respectively. Total quantities of secondary minerals in the anorthosite reaction are more abundant than those in the granite reaction.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.22-22
• /
• 2003

원자로에서 핵분열에 의해 생성된 고에너지 중성자는 감속재를 통해 열평형에 의해 에너지가 낮춰져 통계적 분포, 즉 Maxwell-Boltzman 운동에 따른 에너지 스펙트림을 갖게 된다. 중성자 산란장치는 통상 단색빔을 이용하므로 단색기(monochiomator)를 통해 이 분포에서 특정 파장의 중성자빔을 인출, 즉 단색화한다. 이때 단색기는 각각의 중성자 산란장치에 사용할 수 있는 특정 파장의 중성자빔을 인출하면서도, 파장의 퍼짐을 적절하게 조절하여 높은 중성자속(neutron flux)을 가지며 분해능도 또한 좋아야 한다. 전통적으로 많이 사용하는 단색화 방법은 결정의 내부결함을 유도하여 만든 모자익(mosaic) 결정을 이용하는 것이다. 이 방법은 특정 파장을 얻으면서도 좋은 분해능과 높은 중성자속을 갖는 모자익 결정을 만들기가 어렵고, 한번 결정된 단색기의 특성을 바꿀 수 없는 단점이 있다. 1980년대부터 몇몇 그룹이 거의 완전하게 성장된 단결정 슬랩을 미세하게 구부려서 탄성변형을 주어 effective 모자익 구조를 발생시킨 '구부린 완전결정(bent perfect crystal, BPC)' 단색기를 개발하여 특정 목적에 활용하는 시도를 하였다. BPC 단색기는 단색화된 중성자빔을 집속(focusing)할 수 있으며, 결정의 구부림 정도를 조절하고 배치 기하를 바꿈으로써 다양한 특성을 갖는 단색빔을 얻을 수 있는 장점이 있다. 이렇게 단색기의 기하학적 변수를 조절함으로써 회절빔의 집속도와 분해능을 조절할 수 있어서 잔류응력 측정이나 단결정 회절 및 집합조직 측정장치 등에 적용할 수 있다. 본 연구에서는 BPC 단색기의 원리와 여러 배치기하에 따른 빔의 특성을 소개하고자 한다.빔이 시료와 상호 작용하는 면적과 상호작용하지 않을 때의 빔을 회절모드에서 faraday cup으로 측정한 빔전류로 부터 계산하였다. Gibbsite에 대한 전자빔 조사 시 1분 이내에 급격한 Hydroxyl Ion(OH-)의 이탈로 인해 Cibbsite의 구조는 거시적 비정질화가 되며 시간증가에 따라 χ-alumina → ν-alumina → σ-alumina or δ-alumina의 순으로 상전이를 겪는다. 전자빔 조사 시 관찰된 회절자료의 가시적 변화를 통해 illumination angle 1.25mrad(Dose rate : 334 × 10³ e/sup -//sec·n㎡)일 경우 약 3초 이내에 비정질화가 시작됨을 알 수 있었고 이는 약 1 × 10/sup 6/ e/sup -//sec·n㎡ 의 전자선량에 해당되며 이를 기준으로 각각의 illumination angle에 대한 임계전자선량을 평가할 수 있었다. 실질적으로 Cibbsite와 같은 무기수화물의 직접가열실험 시 전자빔 조사에 의해 야기되는 상전이 영향을 배제하고 실험을 수행하려면 illumination angle 0.2mrad (Dose rate : 8000 e/sup -//sec·n㎡)이하로 관찰하고 기록되어야 함을 본 자료로부터 알 수 있었다.운동횟수에 의한 영향으로써 운동시간을 1일 6시간으로 설정하여, 운동횟수를 결정하기 위하여 오전, 오후에 각 3시간씩 운동시키는 방법과 오전부터 6시간동안 운동시키는 두 방법을 이용하여 품질을 비교하였다. 각 조건에 따라 운동시킨 참돔의 수분함량을 나타낸 것으로, 2회(오전 3시간, 오후 3시간)에 나누어서 운동시키기 위한 육의 수분함량은 73.37±2.02%를 나타냈으며, 1회(6시간 운

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.347-356
• /
• 2010

Bauxite is a main raw material for the production of alumina and aluminum hydroxide in the processing plant of KC company. It is a NORM (Naturally Occurring Radioactive Materials), and its waste, red mud, is a TENORM (Technologically Enhanced Naturally Occurring Radioactive Materials). The purpose of the geochemical and mineralogical investigations of the bedrock and soils in and around the plant, a large NORM source, was to provide basic data for measuring the radiation dose and protecting from radioactive hazards. Soils were mixtures of minerals derived from the country rock (quartz, feldspar, mica, kaolin, gibbsite, and sepiolite) and bauxite (hematite, boehmite, and calcite) of open-air storage. Average U and Th contents of the soil samples were 4.7 ppm and 23 ppm, respectively, indicating somewhat Th anomaly. The average concentrations of radionuclides are $^{40}K$ 100~1,433 Bq/kg, $^{226}Ra$ anomaly in the red mud open-air storage. Soil external hazard indices range from 0.10 to 1.66 with an average of 0.63. Although most of the indices are below 1.0 that is a regulation value, those of 4 samples of total 41 soil samples exceed 1.0, requiring further detailed investigation.