• 한국농공학회지
• /
• 제19권2호
• /
• pp.4377-4384
• /
• 1977

The curvilinear hydrograph can be replaced by an equivalent triangular hydrograph which is more easily constructed and, for routing through reservoirs or stream channels, gives results about as accurate as those obtained using the curvilinear hydrograph. A synthetic hydrograph is prepared using the data from a number of watersheds to develop a dimensionless unit hydrograph applicable to ungauged watersheds. The dimensionless unit hydrograph for the NakDong River Basin was prepared from the unit hydrographs of a variety of nine subwatersheds. The equation for the peak rate of flow (unit volume of runoff in 1.0mm) was derived as {{{{ { q}_{p } = { 0.21AR} over { {T }_{p } } }}}} The results summarized in this study are as follows: 1) It found that the watershed lag time (Lg, hrs) could be expressed by Lg=0.253(L.Lca)0.4171 The product L.Lca is a measure of the size and shape of the watershed. Correlation coefficient for Lg was 0.97 which defined with high significance. 2) The base length of the unitgraph, in hours, was adopted as Tb=17.51+2.073Lg with high significant correlation coefficient, 0.92. 3) Time in hour from start of rise to peak rate (TP) generally occured at the position of 0.289 Tb with some indication of higher values for larger watershed. 4) Triangular hydrograph is a dimensionless unitgraph prepared from the 40 unitgraphs. The equation is shown as {{{{ { q}_{p } = { K.A.R} over { { T}_{p } } }}}}. The constant K=0.21 is defined to NakDong River basin. 5) In the light of the results analyzed in this study, average errors in the peak discharge of the Trjangular unitgraph was estimated as 5.34 percent to the peak of observed average unitgraph. Each ordinate of the Triangular unitgraph was approached closely to the observed one.

• 응용통계연구
• /
• 제27권2호
• /
• pp.239-247
• /
• 2014

본 논문에서는 사회적으로나 개인적으로 매우 민감한 조사에서 조사하고자 하는 모집단이 여러 개의 층으로 구성되어 있고, 각 층이 양적인 속성으로 되어 있는 경우에 Himmelfarb-Edgell의 가법 모형과 Gjestvang-Singh의 가법 모형에 단순임의추출법 대신에 층화추출법을 적용한 층화 가법 양적속성 확률화응답모형을 제안하였다. 제안한 두 모형으로부터 각 층의 양적속성에 대한 모평균의 추정뿐만 아니라 모집단 전체 모평균에 대한 추정을 할 수 있는 이론적 체계를 마련하였다. 그리고 제안한 두 모형에서 비례배분과 최적배분 문제를 다루었으며, 각 배분법에 따른 분산식을 도출하였다. 마지막으로 두 층화 가법 양적속성 확률화응답모형들 간의 효율성을 비교해 본 결과 Gjestvang-Singh의 층화 가법 모형이 Himmelfarb-Edgell의 층화 가법 모형보다 효율적으로 나타났고, 특히 hh값이 작을수록 즉, 제시한 모형의 특성이 직접질문에 가까워질수록 Gjestvang-Singh의 층화 가법 모형의 효율성이 커짐을 알 수 있었다.

• 한국동물위생학회지
• /
• 제28권3호
• /
• pp.215-223
• /
• 2005

The bacteria on the surface of slaughtered meat was monitored to investigate the relationships between microbiological quality and sanitation management in slaughter process of cattle and pig. It was conducted to evaluate the microbiological quality on the surface of slaughtered beef and pork in Seoul from January to December 2004. Two hundred and thirty three beef and 233 pork carcasses were surveyed on generic E coli counts and standard plate count for microbiological quality and Salmonella spp, Listeria monocytogenes, Staphylococcus aureus, Clostridium perfringens and E coli O157: H7 as pathogenic microorganisms. The prevalence of the excellent or good grade $(10^4\;CFU/cm^2)$ in beef and pork carcasses were $100\%\; and\;99.2\%$, respectively. The frequency of beef carcasses with less than $10^2\;CFU/cm^2$ of generic I coli counts was $100\%$, while that of pork carcasses was $99.6\%$. Of 233 beef carcasses, $1(0.42\%)$ was contaminated with L monocytogenes and $6(2.58\%)$ with C perfringens. Of 233 pork carcasses, $11(4.72\%),\;2(0.86\%),\;and\;2(0.86\%)$ were contaminated with L monocytogenes, C perfringens, and S aureus, respectively, Salmonella spp and E coli O157:H7 were not detected with all of the beef and pork carcasses. In conclusion, this study emphasized the Importance of relationship between microbiological quality and sanitation management in slaughter process of cattle and pig, in abattoirs.

• 한국축산식품학회지
• /
• 제30권6호
• /
• pp.905-909
• /
• 2010

Two sets of data on carcass traits and beef cut parameters were used to investigate the relationships between carcass and beef cut measurements, which can be used to make predictions of retail cut percentages. One set had a total of 1,141 measurements of Hanwoo cattle of three different sex origins, which were slaughtered in an abattoir located at the National Institute of Animal Science, RDA, Korea from 1996 to 2008. To develop prediction models for retail cut percentage with higher accuracies than the current model, another set consisting of a total of 13,389 records of carcass and beef cut traits were collected from 30 abattoirs and butcheries in Korea from 2008 to 2009. Bulls yielded heavier and leaner carcasses than steers. High correlation coefficients were estimated between amount of body fat and percent retail cut (-0.82) as well as between back fat thickness (BF) and percent retail cut (-0.62). The amount of retail cut, however, was highly correlated with body weight before slaughter (BW, 0.95) or with cold carcass weight (CWT, 0.94). Relationships between percent retail cut and measurable beef yield traits, BF, loin eye area (LEA) or CWT varied by sex class, which must be considered for development of a prediction model with high accuracy. Models of data for all breeds and sexes fit the effects of breed, sex, and interaction of abattoir by butchers, whereas models of data for each breed and sex fit the effect of interaction of abattoir by butcher only. Due to possible future changes in back fat control, we performed a log transformation of BF. Our new models fit better than the currently used model.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.53-53
• /
• 2011

As the dimension of Cu interconnects has continued to reduce, its resistivity is expected to increase at the nanoscale due to increased surface and grain boundary scattering of electrons. To suppress increase of the resistivity in nanoscale interconnects, alloying Cu with other metal elements such as Al, Mn, and Ag is being considered to increase the mean free path of the drifting electrons. The formation of Al alloy with a slight amount of Cu broadly studied in the past. The study of Cu alloy including a very small Al fraction, by contrast, recently began. The formation of Cu-Al alloy is limited in wet chemical bath and was mainly conducted for fundamental studies by sputtering or evaporation system. However, these deposition methods have a limitation in production environment due to poor step coverage in nanoscale Cu metallization. In this work, gap-filling of Cu-Al alloy was conducted by cyclic MOCVD (metal organic chemical vapor deposition), followed by thermal annealing for alloying, which prevented an unwanted chemical reaction between Cu and Al precursors. To achieve filling the Cu-Al alloy into sub-100nm trench without overhang and void formation, furthermore, hydrogen plasma pretreatment of the trench pattern with Ru barrier layer was conducted in order to suppress of Cu nucleation and growth near the entrance area of the nano-scale trench by minimizing adsorption of metal precursors. As a result, superconformal gap-fill of Cu-Al alloy could be achieved successfully in the high aspect ration nanoscale trenches. Examined morphology, microstructure, chemical composition, and electrical properties of superfilled Cu-Al alloy will be discussed in detail.

• 한국항공우주학회지
• /
• 제34권1호
• /
• pp.24-31
• /
• 2006

본 연구에서는 완전 내재적 기법을 이용한 2계 자유도 모델에 대한 플러터 해석을 수행하였다. 유동해석을 위하여 2차원 Navier-Stokes 지배방정식을 ε-SST 난류모델과 DP-SGS 병렬화 기법을 이용해 구성하였다. 구조해석을 위하여 피치 와 플런지의 2계 자유도를 갖는 모델을 구성하였으며 시간영역에서의 해석을 위하여 유동해석과 마찬가지로 이중 시간 전진 기법을 이용하였다. 가상 시간 전진에서 유체-구조 결합을 통해서 강성결합을 구현하였으며 이를 천음속 플러터 예측에 적용하였다. 플러터 해석의 전형적인 응답인 감쇠응답, 중립응답, 발산응답 및 limit cycle oscillation (LCO) 등을 계산하였으며, 더불어 플러터 속도 경계곡선을 작성하였다. 천음속 플러터 해석은 난류모델 뿐만 아니라 유체-구조 결합 방법에 따라 다른 특성을 보임을 확인하였다.

• 한국발생생물학회지:발생과생식
• /
• 제19권2호
• /
• pp.79-84
• /
• 2015

The Korean native pig (KNP) have been considered as animal models for animal biotechnology research because of their relatively small body size and their presumably highly inbred status due to the closed breeding program. However, little is reported about the use of KNP for animal biotechnology researches. This study was performed to establish the somatic cell nuclear transfer (SCNT) protocol for the production of swine leukocyte antigens (SLA) homotype-defined SCNT KNP. The ear fibroblast cells originated from KNP were cultured and used as donor cell. After thawing, the donor cells were cultured for 1 hour with 15 ${\mu}M$ roscovitine prior to the nuclear transfer. The numbers of reconstructed and parthenogenetic embryos transferred were $98{\pm}35.2$ and $145{\pm}11.2$, respectively. The pregnancy and delivery rate were 3/5 (60%) and 2/5 (40%). One healthy SLA homotype-defined SCNT KNP was successfully generated. The recipient-based individual cloning efficiency ranged from 0.65 to 1.08%. Taken together, it can be postulated that the methodological establishment of the production of SLA homotype-defined cloned KNP can be applied to the generation of transgenic cloned KNP as model animals for human disease and xenotransplantation researches.

• 공업화학
• /
• 제28권5호
• /
• pp.565-570
• /
• 2017

흡연으로 발생되는 담배연기는 주류 연기와 비주류 연기로 구분된다. 담배연기 중 실내로 확산되는 연기의 대부분은 비주류 연기이며, 비주류 연기의 유해물질 농도는 주류 연기의 농도보다 2~3배 높다. 본 연구에서는 $TiO_2$ 광촉매의 doping 성분에 따른 비주류 담배연기 내의 CO, $H_2S$, $NH_3$, HCHO의 제거 효율을 확인하고자 하였다. 실험 결과, CO가 최대 78.37% 제거되었으며, $TiO_2$ 광촉매 공정이 CO 제거에 효과적인 것으로 확인되었다. 또한 CO, $H_2S$, HCHO의 제거에 있어서 $TiO_2$ 광촉매에 doping된 O, Si 성분에 의해 영향을 크게 받는다. 결론적으로, doping된 O, Si 성분이 많을수록 유해물질 제거효율이 높다.

• 대한임상독성학회지
• /
• 제9권1호
• /
• pp.34-38
• /
• 2011

Vinegar is a very popular ingredient used in many cuisines. It is also known for its beneficial health, beauty and possible weight-loss properties. The authors report on a patient who presented to the emergency department with unstable vital signs complaining of generalized abdominal pain after ingestion of 450 ml of apple cider vinegar. We documented a case of corrosive gastrointestinal injury with persistent metabolic acidosis occurring after ingesting apple cider vinegar with an acetic acid concentration of 12~14%. Toxic damage to the liver and kidney were also observed, peaking on post-ingestion day 3. The patient received supportive care and hemoperfusion for three days without much clinical improvement and died in the seventh day of intensive care due to disseminated intravascular coagulation and multi organ failure. Edible vinegar, when taken in large amounts, is capable of inducing corrosive injuries of the GI tract as well as severe systemic toxicities, such as metabolic acidosis. Safety precautions regarding vinegar deserve more public attention and clinicians also should be astute enough to recognize the potential damage accompanying vinegar ingestion.

• Journal of Microbiology and Biotechnology
• /
• 제18권11호
• /
• pp.1848-1852
• /
• 2008

Salmonella remains a primary cause of food poisoning worldwide, and massive outbreaks have been witnessed in recent years. Therefore, this study investigated the antimicrobial activity of methyl gallate (MG), which exhibited good antibacterial activity ($MIC=3.9-125{\mu}g/ml$) against all the bacterial strains tested. In a checkerboard dilution test, MG markedly lowered the MICs of ciprofloxacin (CPFX) against Salmonella. The combined activity of CPFX and MG against Salmonella resulted in fractional inhibitory concentrations (FICs) ranging from 0.0037 to 0.015 and from 0.24 to $7.8{\mu}g/ml$, respectively. Meanwhile, the FIC index ranged from 0.31-0.37, indicating a marked synergistic relationship between CPFX and MG against Salmonella. Time-kill assays also showed a decrease in the CFU/ml between the combination and the more active compound. Therefore, this study demonstrated that MG and CPFX can act synergistically in inhibiting Salmonella in vitro.