• Wind and Structures
• /
• 제13권4호
• /
• pp.363-374
• /
• 2010

Appropriate scaling methods for wind tunnel modelling of building internal pressures induced through a dominant opening were investigated. In particular, model cavity volume distortion and geometric scaling of the opening details were studied. It was found that while model volume distortion may be used to scale down buildings for wind tunnel studies on internal pressure, the implementation of the added volume must be done with care so as not to create two cavity resonance systems. Incorrect scaling of opening details was also found to generate incorrect internal pressure characteristics. Furthermore, the effective air slug or jet was found to be longer when the opening was near a floor or sidewall as evidenced by somewhat lower Helmholtz frequencies. It is also shown that tangential flow excitation of Helmholtz resonance for off-centre openings in normal flow is also possible.

• 한국지리정보학회지
• /
• 제7권4호
• /
• pp.15-23
• /
• 2004

원격탐사 자료를 효율적으로 사용하기 위해서 위성영상의 기하학적인 왜곡을 제거하는 작업은 반드시 필요하다. 이러한 기하보정을 위해서는 기하보정 된 위성영상, 수치지도, GPS 측량 및 기타 방법에 의해 획득되어진 지상기준점을 필요로 한다. 지금까지의 지상기준점을 이용한 기하보정 방법은 수동적으로 이루어 졌으며, 많은 시간과 노력을 필요로 하였다. 본 논문에서는 GCP Chip 데이터베이스를 이용하여 온라인 상에서 자동으로 기하보정 하는 방법을 제안하였다. 제안된 온라인 자동기하보정 시스템은 영상을 입력하는 부분, 지상기준점 영상을 조정하는 부분, 선택된 지상기준점을 수정 및 갱신하는 부분, 그리고 기하보정 결과를 저장하는 네 가지 부분으로 이루어져 있다. 결론적으로 이러한 온라인 자동 기하보정 시스템을 이용하여 기존의 수동적인 기하보정방법 보다 시간 및 노력을 줄일 수 있으며, 랜셋 영상의 활용에 기여할 것이다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.489-492
• /
• 2005

As a former level of MSC(Multi Spectral Camera) telescope of the KOMPSA T2satellite, the several performance tests of EOS(Electro Optical Subsystem) were performed in the EOS level. By these tests, not only the design requirement of payload can be verified but also the test result can be the important criterion to estimate the performance of payload in the launch and space orbit environment. The EOS Geometric Mapping test is to verify the accuracy of the alignment & assembly on the Subsystem of the MSC by measurement like these; LOS(Line of Sight), LOD(Line of Detector), Band to Band Registration, Optical Distortion and Reference Cube. This paper describes the test results and the analysis for the EOS Geometric Mapping.

• IEIE Transactions on Smart Processing and Computing
• /
• 제1권1호
• /
• pp.17-26
• /
• 2012

This paper presents an image processing-based validation method for unrecognizable numbers in severely distorted license plate images which have been degraded by various factors including low-resolution, low light-level, geometric distortion, and periodic noise. Existing vehicle license plate recognition (LPR) methods assume that most of the image degradation factors have been removed before performing the recognition of printed numbers and letters. If this is not the case, conventional LPR becomes impossible. The proposed method adopts a novel approach where a set of reference number images are intentionally degraded using the same factors estimated from the input image. After a series of image processing steps, including geometric transformation, super-resolution, and filtering, a comparison using cross-correlation between the intentionally degraded reference and the input images can provide a successful identification of the visually unrecognizable numbers. The proposed method makes it possible to validate numbers in a license plate image taken under low light-level conditions. In the experiment, using an extended set of test images that are unrecognizable to human vision, the proposed method provides a successful recognition rate of over 95%, whereas most existing LPR methods fail due to the severe distortion.

• 대한조선학회논문집
• /
• 제40권2호
• /
• pp.49-56
• /
• 2003

The welding deformation of a hull structure in the shipbuilding industry is Inevitable at each assembly stage. The geometric inaccuracy caused by the welding deformation tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurateprediction method which can explicitly account for the influence of various factors on the welding deformation. The validity of the prediction method must be also clarified through experiments. This paper is aimed at deriving the simple prediction model for fillet welding deformations. For this purpose, the thermal elasto-plastic analysis varying the welding conditions and plate thickness has been performed. On the basis of numerical results, the formulae for angular distortion and transverse shrinkage have been derived through the regression analysis. Experimental work has been also carried out to clarify the validity of numerical results. It has been found that the numerical results show a good agreement with those of experiments

• International Journal of CAD/CAM
• /
• 제7권1호
• /
• pp.1-10
• /
• 2007

The compression of CAD models is a key technology for realizing Internet-based collaborative product development because big model sizes often prohibit us to achieve a rapid product information transmission. Although there exist some algorithms for compressing discrete CAD models, original precise CAD models are focused on in this paper. Here, the characteristics of hierarchical structures in CAD models and the distribution of their redundant data are exploited for developing a novel data encoding method. In the method, different encoding rules are applied to different types of data. Geometric data is a major concern for reducing model sizes. For geometric data, the control points of B-spline curves and surfaces are compressed with the second-order predictions in a local coordinate system. Based on analysis to the distortion induced by quantization, an efficient method for computation of the distortion is provided. The results indicate that the data size of CAD models can be decreased efficiently after compressed with the proposed method.

• 패션비즈니스
• /
• 제18권2호
• /
• pp.14-28
• /
• 2014

This study analyzed the group of experts who were related to cubism, selected among the works of 2010~2013 Paris Collection based on F.G.R.(Focus Group Research). According to the results of this study, there were appeared first, 'a one-piece dress' second, 'H silhouette' third, 'cotton', in case of item distribution and frequency. The analysis was done by using the manner of expression, cubical expression, exaggeration, distortion, dismantlement, geometrical division of face, mix-match look, wraparound repetition, asymmetric structure, etc. Based on the outcomes of the analysis on figurative design elements, this study adjusted three manners appearing on cubism fashion style. First, it was 'avant garde manner' of constitution or 'dismantlement' which was compiled into multi-view representations of overlaps and viewpoints by repetitive use of color tone trimming detail. Second, it was 'geomagnetic block placement' which expresses cubism with geometric partitioning of surface and separation of panel by cutting disintegration. Finally, it was 'distortion and simplification of silhouette' which is a distortion created by constitution-line pressed thin with silhouette. It maximizes the beauty of human body outline, which was distorted by three-dimensional-manipulation, and simplified by ellipsis for another shape for the extension or expansion of detail trimming.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권2호
• /
• pp.106-114
• /
• 2015

In the fabrication of offshore oil and gas facilities, the significance of dimension control is growing continuously. But, it is difficult to determine the deformation of the structure during fabrication by simple lab tests due to the large size and the complicated shape. Strain-boundary method (a kind of shrinkage method) based on the shell element was proposed to predict the welding distortion of a structure effectively. Modeling of weld geometry in shell element is still a difficult task. In this paper, a concept of imaginary temperature pair is introduced to handle the effect of geometric factors such as groove shape, plate thickness and pass number, etc. Single pass imaginary temperature pair formula is derived from the relation between the groove area and the FE mesh size. By considering the contribution of each weld layer to the whole weldment, multi-pass imaginary temperature is also derived. Since the temperature difference represents the distortion increment, cumulative distortion curve can be drawn by integrating the temperature difference. This curve will be a useful solution when engineers meet some problems occurred in the shipyard. A typical example is shown about utilization of this curve. Several verifications are conducted to examine the validity of the proposed methodology. The applicability of the model is also demonstrated by applying it to the fabrication process of the heavy ship block. It is expected that the imaginary temperature model can effectively solve the modeling problem in shell element. It is also expected that the cumulative distortion curve derived from the imaginary temperature can offer useful qualitative information about angular distortion without FE analysis.

• 한국산업정보학회논문지
• /
• 제27권3호
• /
• pp.11-20
• /
• 2022

현재 광고 분야 등에 널리 사용되고 있는 흑백 QR코드의 정보 저장 용량을 증가시키기 위해 칼라 QR코드에 대한 연구가 활발히 진행되고 있다. 그러나 칼라 QR코드는 프린팅 또는 스캐닝 과정에 의해 복재가 될 수 있으며, 이 과정에서 불충분한 조도에 의한 색상 왜곡과 잡음, 카메라의 낮은 해상도와 기하학적 변형의 가능성이 있다. 이러한 일련의 복합적인 과정들은 품질 저하와 인식률 저하를 초래한다. 이러한 문제점을 극복하기 위해 본 논문에서는 칼라 QR코드에 패턴 삽입을 고려하고, 이를 위한 효과적인 인식 방법을 제안한다. 또한, 제안한 방법을 통해 기존에 다루어진 대표적인 패턴을 도입하고, 인식률 측면에서 실험을 수행하여 그 결과를 비교 분석한다. 즉, 인식과정에 있어서 쉽게 초래되는 가우시안 잡음과 블러링, 기하학적 변형 등의 잡음을 고려하여 성능을 비교 분석한다. 다양한 실험을 통해 가우시안 잡음과 블러 측면에서 단순한 패턴의 칼라 QR코드가 우수한 성능을 보이는 것을 확인할 수 있다.

• 대한원격탐사학회지
• /
• 제32권1호
• /
• pp.49-60
• /
• 2016

This paper presents a set of methods to evaluate the image quality of smartphone cameras as compared with that of a DSLR camera. In recent years, smartphone cameras have been used broadly for many purposes. As the performance of smartphone cameras has been enhanced considerably, they can be considered to be used for precise mapping instead of metric cameras. To evaluate the possibility, we tested the quality of one DSLR camera and 3 smartphone cameras. In the first step, we compare the amount of lens distortions inherent in each camera using camera calibration sheet images. Then, we acquired target sheet images, extracted reference lines from them and evaluated the geometric quality of smartphone cameras based on the amount of errors occurring in fitting a straight line to observed points. In addition, we present a method to evaluate the radiometric quality of the images taken by each camera based on planar fitting errors. Also, we propose a method to quantify the geometric quality of the selected camera using edge displacements observed in target sheet images. The experimental results show that the geometric and radiometric qualities of smartphone cameras are comparable to those of a DSLR camera except lens distortion parameters.