• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.3
• /
• pp.255-263
• /
• 2022

The subthreshold swing (SS) of an asymmetric junctionless double gate (AJLDG) MOSFET is analyzed by the use of Gaussian function. In the asymmetric structure, the thickness of the top/bottom oxide film and the flat-band voltages of top gate (V_fbf) and bottom gate (V_fbb) could be made differently, so the change in the SS for these factors is analyzed with the projected range and standard projected deviation which are parameters for the Gaussian function. An analytical subthreshold swing model is presented from the Poisson's equation, and it is shown that this model is in a good agreement with the numerical model. As a result, the SS changes linearly according to the geometric mean of the top and bottom oxide film thicknesses, and if the projected range is less than half of the silicon thickness, the SS decreases as the top gate oxide film is smaller. Conversely, if the projected range is bigger than a half of the silicon thickness, the SS decreases as the bottom gate oxide film is smaller. In addition, the SS decreases as V_fbb-V_fbf increases when the projected range is near the top gate, and the SS decreases as V_fbb-V_fbf decreases when the projected range is near the bottom gate. It is necessary that one should pay attention to the selection of the top/bottom oxide thickness and the gate metal in order to reduce the SS when designing an AJLDG MOSFET.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1782-1792
• /
• 1994

Ti : $LiNbO_3$ traveling-wave phase optical modulators at wavelength 1.3㎛ have been designed and fabricated, focusing on the optical waveguide and asymmetric coplanar electrode structure. To improve the phase-mismatch of traveling-wave ACPS electrode, the characteristic impedance, effective microwave index, and electrode loss have been presented as a function of geometric parameters including electrode and buffer layer thickness. Low-loss channel optical waveguides on $LiNbO_3$ were fabricated by the Ti diffusion method with $O_2$ water-vapor environment. $2.5{\mu}m$ thick electrode was successfully fabricated by double-spin image reversal process. Modulation bandwidth was limited by a resonance at 2.9 GHz and modulation bandwidth up to 2.5GHz was approxirnately measured.

• Korean Institute of Interior Design Journal
• /
• no.33
• /
• pp.122-128
• /
• 2002

In the Sci-Fi movie, with future scene in its setting, how images are shown in the film is very important. Sci-Fi movie is supposed to be expressed In different way of its set design. This study suggests various types of expression in Sci-Fi movies. Sci-Fi movies construct the narrative upon the binary opposition of nature vs. culture, human vs. nonhuman. Sci-Fi movie is a contested terrain where conservative, liberal and radical ideologies are competing. While liberal Sci-Fi movies consider the opposition compatible, conservative texts show the paranoid towards science and nonhumans. And, Sci-Fi movies are expressed as utopian and dystopian. Utopian and dystopian elements are found in the history of architecture. Utopian element is often found in the religious architecture, and those buildings are geometric, orderly, and gorgeous. Dystopian element is often found in modern architecture, and those are asymmetric, distorted, and incompleted. Conservative movie, which developing of science is expressed negatively, retains both utopian and dystopian elements evenly. Liberal movie, such as Space Opera which science is expressed positively, is changed from futurist and mechanical type into more simple, geometric and orderly shrine type. Radical movie, which the boundary of human and science is expressed darkly, retains dark, complex, and incomplete dystopian expression elements.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.29-32
• /
• 2002

The mechanical joining process of a sheet metal pair has been developed in order to replace the resistance spot welding process in case that joining of mechanically unweldable materials and coated sheet metals with different thickness are needed. Form-joining or clinching, a kind of mechanical joining process, is defined as joining process of a sheet metal pair by geometric constraint imposed by plastic deformation of workpieces without any additive part. It has been reported that the joining strength by commercial form-joining apparatus is 50∼70 percent of that by resistance spot welding. Therefore, a two-step form-joining process with a secondary punch is proposed. The device is designed to improve the joining strength by increasing the geometric constraint of the deformed shape by combining a primary punch, a secondary punch and a female die. In order to verify the improved joining strength by the designed process, the tensile-shear strength, the peel-tension strength and the asymmetric peel-tension strength are compared with those by the TOX process and resistance spot welding.

• Journal of Fashion Business
• /
• v.24 no.5
• /
• pp.125-139
• /
• 2020

The fashion industry that perceived the severity of environmental pollution, has sought various methods of sustainable fashion. However, most of the businesses paid attention to the development of materials using industrial waste, or vegan material. Thus, this study aims to present the methods for improvement in creativity for inversely developing the design from patterns and present new approaches by applying the contrarian development of proto to class under the limited condition of material concerning general design, selection of material, and production of sample. In the case of three student teams enrolled in the first semester of the second year, the fabric and used clothing donated by industry were used as material. The whole cut for cutting a single fabric in connected state, and Zero Wastes Design within a rectangular frame of fabric, upcycling of used clothes, and cutting out of Geometric Form are suggested. The team(A) produced a zero-wastes coat and whole-cut Pancho that could be variously represented. The team(B) produced two kinds of asymmetric dress by utilizing used check-patterned shirts through upcycling. The team(C) utilized the fabric in geometric forms such as rectangle, trapezoid, and atypical figure by drawing design within donated fabrics. The items were a dress, blouse, and skirt. Consequently, an opportunity for both academia and industry to present more concrete methods for sustainable fashion and deeply perceive the sustainable fashion is presented along with novel methods for creation by carrying out the composition of pattern and design at the same time.

• Transactions of Materials Processing
• /
• v.25 no.6
• /
• pp.379-389
• /
• 2016

As a stator for steam turbine diaphragm, hollow-type nozzle stator to substitute for conventional solid one is introduced in this study. This hollowed stator can be separated into two parts such as upper and lower plates with large and curved surface area. This study focuses on thick plate forming process for the upper plate of the hollow-partitioned nozzle stator. First, to reduce forming defects such as under-cut and localized thinning of the deformed plate, and to avoid tool interruption between forming punch and lower die, tool design including the position determination of forming surfaces is performed. Uni-axial tensile tests are carried out using SUS409L steel plate with initial thickness of 5.00mm, and plastic strain ratio (r-value) is also obtained. Due to the asymmetric curved configuration of the upper plate, it is hard to adopt a series of blank holder or draw-bead, so the initial plate during this thick plate forming experiences unstable and non-uniform contact. To easy this forming difficulty and find suitable tool geometry without sliding behavior of the workpiece in the die cavity, two geometric parameters with respect to each shoulder angle of the lower die and the upper punch are adopted. FE models with consideration of 21 combinations for the geometric parameters are built-up, and numerical simulations are performed. From the simulated and predicted results, it is shown that the geometric parameter combinations with ($30^{\circ}$, $90^{\circ}$) and ($45^{\circ}$, $90^{\circ}$) for the shoulder angle of the lower die and the upper punch are suitably applied to this upper plate forming of the hollow-partitioned nozzle stator used for the turbine diaphragm.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.8
• /
• pp.41-48
• /
• 1992

The characteristics of traveling-wave electrodes for high-frequency electroptic integrated devices are described from the view point of improvement of phase-matching based on the conformal mapping method. Specific calculations of the characteristic impedance, effective microwave index, and eletrode loss for asymmetric coplanar strip(ACPS) and coplanar waveguide(CPW) electrode structures are presented as a function of the geometric electrode parameters including the electrode thickness and buffer layer thickness. 5-10(x10S0-6Tm) thick Au-ACPS electrodes were successfully fabricated by electroplating and ECR etcher. The improvement of modulation bandwidth can be theoretically observed from the combination of electrode and buffer layer thickness.

• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.3-10
• /
• 1995

The compressible laminar and turbulent viscous flow on a slender body in supersonic speed as well as subsonic speed has been numerically simulated at high angle of attack. The steady and time-accurate compressible thin-layer Navier-Stokes code based on an implicit upwind-biased LU-SGS algorithm has been developed and specifically applied at angles of attack of 20, 30, 40 deg, respectively. The modified eddy-viscosity turbulence model suggested by Degani and Schiff was used to simulate the case of turbulent flow. Any geometric asymmetry and numerical perturbation have not been intentionally or artificially imposed in the process of computation. The purely numerical results for laminar and turbulent cases, however, show clear asymmetric formation of vortices which were observed experimentally. Contrary to the subsonic results, the supersonic case shows the symmetric formation of vortices as indicated by the earlier experiments.

• Steel and Composite Structures
• /
• v.22 no.5
• /
• pp.1073-1084
• /
• 2016

Rectangular concrete-filled steel tubular columns with unequal wall thickness were investigated in the paper. The physical centroid, the centroidal principal axes of inertia, and the section core were given. The generalized bending formula and the generalized eccentric compression formula were deduced, and the equation of the neutral axis was also provided. The two rectangular concrete-filled steel tubular stub specimens subjected to the compression load on the physical centroid and the geometric centroid respectively were tested to verify the theoretical formulas.

• Journal of the Korean Society of Costume
• /
• v.32
• /
• pp.131-147
• /
• 1997

The works of the Futurism were developed along with manifestos and statement in publishing " The Foundation and Manifestos of Futurism" Futurist aesthetic and ideological agenda on futurist fashion displayed in mani-festos on clothes. It was propagated in con-summate Futurist style through the written manifestos. The Futurists anticipated much of modern fashion phenomenon. In Futurist Men's Cloth-ing in 1914 they believed continual renual of our today's clothes. Today's clothes is much our today's clothes. Today's clothes is much more simple than yesterday's clothes. The oppositions of the type between yesterday's clothes and today's clothes are mournful=play-ful melancolic-cheerful grey-colorful tradi-tional-emphemeral. Futurist men's clothing is aggressive agile dynamic simple and confor-table hygienic gay luminous volatile asym-metric ephemeral and variable. In general the Futurist argued for clothes that promoted simple and functionality. They made dynamic patterns in textile design and asymmetric geometric cuts in pattern making. They suggested an unconventional matetials and strong bright colors and modificanti. These elements pointed the way to a shim-mering exuberant future.