• ETRI Journal
• /
• v.30 no.6
• /
• pp.774-782
• /
• 2008

An operational orbit determination (OD) and prediction system for the geostationary Communication, Ocean, and Meteorological Satellite (COMS) mission requires accurate satellite positioning knowledge to accomplish image navigation registration on the ground. Ranging and tracking data from a single ground station is used for COMS OD in normal operation. However, the orbital longitude of the COMS is so close to that of satellite tracking sites that geometric singularity affects observability. A method to solve the azimuth bias of a single station in singularity is to periodically apply an estimated azimuth bias using the ranging and tracking data of two stations. Velocity increments of a wheel off-loading maneuver which is performed twice a day are fixed by planned values without considering maneuver efficiency during OD. Using only single-station data with the correction of the azimuth bias, OD can achieve three-sigma position accuracy on the order of 1.5 km root-sum-square.

• Korean Journal of Remote Sensing
• /
• v.30 no.6
• /
• pp.787-795
• /
• 2014

This paper presents an image registration using Triangulation-based Local Transformation (TLT) applied to the remaining matched points after elimination of the matched points with gross error. The corners extracted using geometric mean-based corner detector are matched using Pearson's correlation coefficient and then accepted as initial matched points only when they satisfy the Left-Right Consistency (LRC) check. We finally accept the remaining matched points whose RANdom SAmple Consensus (RANSAC)-based global transformation (RGT) errors are smaller than a predefined outlier threshold. After Delaunay triangulated irregular networks (TINs) are created using the final matched points on reference and sensed images, respectively, affine transformation is applied to every corresponding triangle and then all the inner pixels of the triangles on the sensed image are transformed to the reference image coordinate. The proposed algorithm was tested using KOMPSAT-2 images and the results showed higher image registration accuracy than the RANSAC-based global transformation.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.4
• /
• pp.71-81
• /
• 2012

In order to support simple authoring an application of augmented reality for diverse users, the process for the object registration comprised of tracking and recognizing the object should be accomplished intuitively and simple. Although many 3D reconstruction methods to be applied to the object registration have been developed, the methods have not beyond the experimental level yet. In this paper, we proposed a novel marker-based tangible interfaces for various users to manipulate the object with intuitive and simple approaches during an authoring applications fo augmented reality. The proposed method make use of marker as intuitive interface to obtain 3D geometric information of 3D reconstruction. 3D geometric information of an object surface is acquired by touching the object directly with the proposed tangible interfaces. The tangible interfaces not only support 3D reconstruction for graphical modeling but also offer features information which is used for augmented reality. Finally, we verify efficiency of the proposed method with demonstration of an augmented reality application using the proposed method.

• Journal of Internet Computing and Services
• /
• v.7 no.5
• /
• pp.135-145
• /
• 2006

This paper presents a novel approach to real-time recognition of 3D environment and objects for intelligent robots. First. we establish the three fundamental principles that humans use for recognizing and interacting with the environment. These principles have led to the development of an integrated approach to real-time 3D recognition and modeling, as follows: 1) It starts with a rapid but approximate characterization of the geometric configuration of workspace by identifying global plane features. 2) It quickly recognizes known objects in environment and replaces them by their models in database based on 3D registration. 3) It models the geometric details on the fly adaptively to the need of the given task based on a multi-resolution octree representation. SIFT features with their 3D position data, referred to here as stereo-sis SIFT, are used extensively, together with point clouds, for fast extraction of global plane features, for fast recognition of objects, for fast registration of scenes, as well as for overcoming incomplete and noisy nature of point clouds. The experimental results show the feasibility of real-time and behavior-oriented 3D modeling of workspace for robotic manipulative tasks.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.867-874
• /
• 2010

RFID printing technology has emerged recently as an important tool for leading future IT. Therefore, many manufacturers concerning on low cost and mass production of the related products pay close attention to the printing technology. In order to realize printed electronics, the technologies for fine line-width/gap printing and registration are essential work. This study proposes a precise Roll to Roll control system that is capable of tilting two posts. Two controllable tilting posts can adjust film position at traverse direction for the precision registration. A mathematical model for representing the geometric features of each posts in Roll to Roll printing system is established first. Then an operating program is built to implement the system and to control film movement. For experimental test, a hard ware system is fabricated which is consisted of two AC servo motors, two posts tilting mechanisms, several guide rolls, and so on. The test results show the proposed system can control the film position precisely at transverse direction.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.4
• /
• pp.29-34
• /
• 2002

In this paper, we present a new geometric active contour model based on level set methods introduced by Osher and Sethian for detection of object boundaries or shape and we adopt anisotropic diffusion filtering method for removing noise from original image. In order to minimize the processing time, we use the narrow band method which allows us to perform calculations in the neighborhood of the contour and not in the whole image. Using anisotropic diffusion filtering for each slice, we have the result with reduced noise and extracted exact shape. Volume rendering operates on three-dimensional data, processes it, and transforms it into a simple two-dimensional image.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.3
• /
• pp.41-48
• /
• 2012

Using multi-sensor or multi-temporal high resolution satellite images together is essential for efficient applications in remote sensing area. The purpose of this paper is to estimate geometric difference of translations between high-resolution optical and SAR images automatically. The geometric and radiometric pre-processing steps were fulfilled to calculate the similarity between optical and SAR images by using Mutual Information method. The coarsest-level pyramid images of each sensor constructed by gaussian pyramid method were generated to estimate the initial translation difference of the x, y directions for calculation efficiency. The precise geometric difference of translations was able to be estimated by applying this method from coarsest-level pyramid image to original image in order. Yet even when considered only translation between optical and SAR images, the proposed method showed RMSE lower than 5m in all study sites.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.667-675
• /
• 2011

In this paper, we propose an automatic image-to-image registration between high resolution multi-sensor images. To do this, TerraSAR-X image was shifted according to the initial translation differences of the x and y directions between images estimated using Mutual Information method. After that, the Canny edge operator was applied to both images to extract linear features. These features were used to design a cost function that finds matching points based on the similarities of their locations and gradient orientations. For extracting large number of evenly distributed matching points, only one point within each regular grid constructed throughout the image was extracted to the final matching point pair. The model, which combined the piecewise linear function with the global affine transformation, was applied to increase the accuracy of the geometric correction, and the proposed method showed RMSE lower than 5m in all study sites.

• Progress in Medical Physics
• /
• v.30 no.1
• /
• pp.32-38
• /
• 2019

Purpose: The objective of this study is to evaluate the geometrical accuracy of a patient-specific bolus based on a three-dimensional (3D) printed mold and casting method. Materials and Methods: Three breast cancer patients undergoing treatment for a superficial region were scanned using computed tomography (CT) and a designed bolus structure through a treatment planning system (TPS). For the fabrication of patient-specific bolus, we cast harmless certified silicone into 3D printed molds. The produced bolus was also imaged using CT under the same conditions as the patient CT to acquire its geometrical shape. We compared the shapes of the produced bolus with the planned bolus structure from the TPS by measuring the average distance between two structures after a surface registration. Results and Conclusions: The result of the average difference in distance was within 1 mm and, as the worst case, the absolute difference did not exceed ${\pm}2mm$. The result of the geometric difference in the cross-section profile of each bolus was approximately 1 mm, which is a similar property of the average difference in distance. This discrepancy was negligible in affecting the dose reduction. The proposed fabrication of patient-specific bolus is useful for radiation therapy in the treatment of superficial regions, particularly those with an irregular shape.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.435-440
• /
• 2002

The objective of this study is to analyze the relationship between polarimetric radar backscatters and stand characteristics over the mountainous forest area. L- and P-band full polarimetric airborne SAR data obtained in September 2000 were processed to compare with forest stand maps and ground collected stand variables. After the geometric registration of SAR image, mean radar backscatters were extracted for those ground plots where the stand parameters, such as tree height, DBH, and basal area, were measured during and after the SAR data acquisition. Preliminary analysis was focused on the topographic influence of radar backscattering under the homogeneous forest stand condition. Topographic effects, assessed by the local incidence angles, were different obvious in L-band data while it was not clear with P-band data.