• 대한원격탐사학회지
• /
• 제18권6호
• /
• pp.337-344
• /
• 2002

일반적으로 위성영상으로부터 위치정보를 획득하기 위해서는 센서와 촬영대상간의 기하학적 관계를 규명하는 센서모델링이 선행되어야 한다. 그러나 Linear CCD (Charge Coupled Device) 배열에 의해 얻어지는 Pushbroom 위성영상은 Frame 센서에 의해 얻어지는 영상과 달리 영상을 획득하는 동안에 투영중심의 위치와 자세가 시간에 따라 변하기 때문에 정확한 센서모델링에 어려움이 있다. 또한 영상에 대한 궤도정보가 알려지지 않거나 불확실한 경우에는 물리적 센서모델의 적용에 어려움이 따르게 된다. 따라서 본 논문에서는 인공위성의 궤도정보가 알려지지 않거나 불확실한 경우에 Frame, Pushbroom, Whiskbroom, SAR 영상 등 다양한 영상자료에 적합한 센서모델로서 RFM(Rational Function Model)의 적용가능성을 검토하였다. 이를 위해서 KOMPSAT EOC 영상과 SPOT영상에 RFM을 적용하였으며, 지상기준점을 20개, 30개, 40개, 50개, 60개, 70개의 경우로 나누어 지상기준점의 개수와 배치 및 RFM 계수의 차수변화에 따른 RFM의 정확도를 분석하였다. 또한 수학적 모델 중에 하나인 DLT를 구현하여 RFM과 비교하였다.

• Structural Engineering and Mechanics
• /
• 제55권6호
• /
• pp.1261-1278
• /
• 2015

Due to their low intrinsic damping, stay cables in cable-stayed bridges have often exhibited unanticipated and excessive vibrations which result in increasing maintenance frequency and disruption to normal operations of the entire bridges. Mitigation of undesired cable vibration can be achieved by attaching an external damping device near the anchorage. High Damping Rubber (HDR) dampers have many advantages such as compact size, better aesthetics, easy maintenance, temperature stability, and cost benefits; therefore, they have been widely used to increase cable damping. Although a single damper has been shown to reduce cable vibrations, it is not the most effective method due to geometric constraints. This paper proposes the use of two HDR dampers to improve effectiveness and robustness in suppressing cable vibration. Oscillation parameters of the cable-dampers system were investigated in detail by modeling the stay cable as a taut string and each HDR damper as complex-valued impedance and by using an analytical formulation of the complex eigenvalue problem. The problem of two HDR dampers arbitrarily located along a cable is solved and the solution is discussed. Asymptotic formulas to calculate the damping ratios of the cable with two HDR dampers installed near the anchorage(s) are proposed and compared with the exact solutions. Further, a design example is presented in order to justify the methodology. The results of this study show that when the two HDR dampers are installed close to each other on the same end of the cable, some interaction between the dampers leads to reduced damping ratio. When the dampers are on the opposite ends of the cable, they are effective in increasing damping ratio and can provide better vibration reduction to multiple modes.

• 스마트미디어저널
• /
• 제10권2호
• /
• pp.30-37
• /
• 2021

최근 웹툰이나 애니메이션을 3D 콘텐츠로 제작하는 사례가 증가하고 있다. 3D 콘텐츠 제작에서 모델링은 반드시 필요하지만 시간이 오래 걸리는 작업이다. 드로잉 기반 모델링을 사용하여 2D 카툰 원화에서 3D 모델을 생성하기 위해서는 라인 드로잉이 필요하다. 하지만 2D 카툰원화는 3D 모델의 기하학적 특성이 표현되지 않고 카툰원화의 제작 기법이 다양하여 일관성 있게 라인 드로잉 추출이 힘들다. 본 연구에서는 generative adversarial network (GAN) 모델을 사용하여 2D 카툰 원화에서 3D 모델의 기하학적 특성을 나타내는 라인 드로잉을 추출하는 방법을 제안하고 이를 실험한다.

• 분석과학
• /
• 제34권2호
• /
• pp.87-98
• /
• 2021

In this study, we developed the nanoparticle multi-generator by 3D printer fusion deposition modeling (FDM) method that can reliably generate and deliver nanoparticles at a constant concentration for inhalation risk assessment. A white ABS filament was used as the test material, and SMPS was used for concentration analysis such as particle size and particle distribution. In the case of particle size, the particle size was divided by 100 nm or less and 100 to 1,000 nm, and the number of particles concentration, mass concentration, median diameter of particles, geometric average particle diameter, etc were measured. The occurrence conditions were the extruder temperature, the extruding speed of the nozzle, and the air flow rate, and experiments were conducted according to the change of conditions including the manufacturer's standard conditions. In addition, the utility of inhalation risk assessment was reviewed through a stability maintenance experiment for 6 h. As a result of the experiment, the size of the nanoparticles increased as the discharger temperature increased, as the discharge speed of the nozzle increased, and as the air flow rate decreased. Also, a constant pattern was shown according to the conditions. Even when particles were generated for a long time (6 h), the concentration was kept constant without significant deviation. The distribution of the particles was approximately 80 % for particles of 60 nm to 260 nm, 1.7 % for 1 ㎛ or larger, 0.908 mg/㎥ for the mass concentration, 111 nm for MMAD and 2.10 for GSD. Most of the ABS particles were circular with a size of less than 10 nm, and these circular particles were aggregated to form a cluster of grape with a size of several tens to several hundred nm.

• 한국산학기술학회논문지
• /
• 제22권1호
• /
• pp.792-800
• /
• 2021

본 논문은 Halbach 자석 배열을 사용하여 새로운 구조의 선형 능동자기 베어링 개발을 제시하고자 하였다. 선형 능동자기 베어링은 자석 간 발생하는 자중 보상 능력과 코일에 전류를 인가함으로서 발생하는 동적 힘을 이용하여 반도체 장비, 가공 장비 등 다양한 산업분야에서 적용되고 있다. 기존의 선형 능동자기 베어링은 크기에 비해 동적 힘이 낮은 문제점이 있다. 따라서 본 논문에서는 기존 보다 높은 동적 힘을 발휘하는 선형 능동자기 베어링을 개발하기 위해 시뮬레이션을 통해 기존 구조를 분석하고 새로운 구조를 제안하였다. 제안된 새로운 구조의 선형 능동 자기베어링을 최적화하기 위해서 모델링 및 최적 설계를 수행하였다. Sequential Quadratic Programming을 사용하여 제안된 선형 능동자기 베어링의 기하학적 설계 변수에 대해 최적의 설계가 수행되었으며, 최적설계 된 선형 능동자기 베어링의 설계성능은 정적 힘 45.063 N, 로렌츠 힘 상수 19.543 N/A 로 기존보다 높은 동적 힘을 발휘하는 것이 확인되었다.

• 한국수자원학회논문집
• /
• 제53권12호
• /
• pp.1059-1070
• /
• 2020

하천단면 계측자료는 하천관리를 위한 유량산정 및 홍수 예·경보 방안 등 수리·수문 모델링 관련 연구에서 가장 중요한 입력자료 중 하나이다. 그러나 불규칙한 기하학적 구조로 이어지는 하천의 정확하고 연속적인 단면자료의 취득은 시간과 비용적 측면에서 큰 제약이 따른다. 이러한 관점에서 본 연구의 목적은 연속적인 하천특성의 공간분포를 시간과 비용, 인력의 투입을 최소화하여 계측할 수 있는 방법론을 개발하는 것이다. 따라서 RGB기반 항공 이미지와 실측 자료를 이용한 다중 선형 회귀 분석을 통해 각 단면별로 수심을 추정하고 연속적인 단면 추정 가능성과 정확도를 검토하고자 하였다. 실측 자료와 비교검증을 통해 공간적으로 이질적인 관계를 포착할 수 있는 수심 약 2 m 내외에서 수심을 정확하게 추정할 수 있음을 확인하였으며 이를 통해 정확하고 연속적인 하천 단면 취득에 기여할 수 있을 것으로 기대한다.

• Journal of Radiation Protection and Research
• /
• 제47권3호
• /
• pp.111-133
• /
• 2022

The exciting advancement related to the "modeling of digital human" in terms of a computational phantom for radiation dose calculations has to do with the latest hype related to deep learning. The advent of deep learning or artificial intelligence (AI) technology involving convolutional neural networks has brought an unprecedented level of innovation to the field of organ segmentation. In addition, graphics processing units (GPUs) are utilized as boosters for both real-time Monte Carlo simulations and AI-based image segmentation applications. These advancements provide the feasibility of creating three-dimensional (3D) geometric details of the human anatomy from tomographic imaging and performing Monte Carlo radiation transport simulations using increasingly fast and inexpensive computers. This review first introduces the history of three types of computational human phantoms: stylized medical internal radiation dosimetry (MIRD) phantoms, voxelized tomographic phantoms, and boundary representation (BREP) deformable phantoms. Then, the development of a person-specific phantom is demonstrated by introducing AI-based organ autosegmentation technology. Next, a new development in GPU-based Monte Carlo radiation dose calculations is introduced. Examples of applying computational phantoms and a new Monte Carlo code named ARCHER (Accelerated Radiation-transport Computations in Heterogeneous EnviRonments) to problems in radiation protection, imaging, and radiotherapy are presented from research projects performed by students at the Rensselaer Polytechnic Institute (RPI) and University of Science and Technology of China (USTC). Finally, this review discusses challenges and future research opportunities. We found that, owing to the latest computer hardware and AI technology, computational human body models are moving closer to real human anatomy structures for accurate radiation dose calculations.

• Composites Research
• /
• 제35권1호
• /
• pp.31-37
• /
• 2022

본 연구에서는 복합재료 블레이드의 최적 구조설계 프레임워크를 개발하고 이를 헬리콥터 블레이드에 적용하여 구조설계를 수행하였다. 개발된 최적 설계 프레임워크는 유전자 알고리즘과 입자 군집 최적화 알고리즘을 결합한 PSGA를 활용해 구성하였다. 이는 블레이드 단면에 대한 유한요소 모델 생성, 2차원 단면 유한요소 해석, 그리고 1차원 회전 보 해석의 단계를 거쳐 최적화 결과를 도출해낸다. 설계 과정에서 각 단면들은 B-spline으로 구성되며, 유한요소 생성 프로그램인 Gmsh를 활용해 모델링 된다. 이를 활용하여 최적화 과정에서 각 변수마다 대응되는 2차원 유한요소모델을 생성해 블레이드의 구조해석을 수행했다. 본 연구에서 제안한 프레임워크를 HART II 블레이드에 적용하여 최적 구조 설계를 수행했다. 최적 설계 결과 회전익 로터에서 요구하는 구조적 특징을 유지하면서, 공진회피와 질량 등의 조건이 개선된 블레이드 형상을 도출하였다.

• Steel and Composite Structures
• /
• 제46권4호
• /
• pp.471-483
• /
• 2023

This paper presents an analytical hyperbolic theory based on the refined shear deformation theory for mechanical stability analysis of the simply supported advanced composites plates (exponentially, sigmoidal and power-law graded) under triangular, trapezoidal and uniform uniaxial and biaxial loading. The developed model ensures the boundary condition of the zero transverse stresses at the top and bottom surfaces without using the correction factor as first order shear deformation theory. The mathematical formulation of displacement contains only four unknowns in which the transverse deflection is divided to shear and bending components. The current study includes the effect of the geometric imperfection of the material. The modeling of the micro-void presence in the structure is based on the both true and apparent density formulas in which the porosity will be dense in the mid-plane and zero in the upper and lower surfaces (free surface) according to a logarithmic function. The analytical solutions of the uniaxial and biaxial critical buckling load are determined by solving the differential equilibrium equations of the system with the help of the Navier's method. The correctness and the effectiveness of the proposed HyRPT is confirmed by comparing the results with those found in the open literature which shows the high performance of this model to predict the stability characteristics of the FG structures employed in various fields. Several parametric analyses are performed to extract the most influenced parameters on the mechanical stability of this type of advanced composites plates.

• Earthquakes and Structures
• /
• 제24권3호
• /
• pp.217-235
• /
• 2023

Orthogonal pairs of rollers on concave beds (OPRCB) are a low-cost, low-tech rolling-based isolating system, whose high efficiency has been shown in a previous study. However, seismic performance of OPRCB isolators has only been studied in the two-dimensional (2D) state so far. This is while their performance in the three-dimensional (3D) state differs from that of the 2D state, mainly since the vertical accelerations due to rollers' motion in their beds, simultaneously in two orthogonal horizontal directions, are added up and resulting in bigger vertical inertia forces and higher rolling resistance. In this study, first, Lagrange equations were used to derive the governing equations of motion of the OPRCB-isolated buildings in 3D. Then, some regular shear-type OPRCB-isolated buildings were considered subjected to three-component excitations of far- and near-source earthquakes, and their responses were compared to those of their fixed-base counterparts. Finally, the effects of more realistic modeling and analysis were examined by comparing the responses of isolated buildings in 2D and 3D states. Response histories were obtained by the fourth-order Runge-Kutta-Nystrom method, considering the geometrical nonlinearity of isolators. Results reveal that utilizing the OPRCB isolators effectively reduces the acceleration response, however, depending on the system specifications and earthquake characteristics, the maximum responses of isolated buildings in the 3D state can be up to 40% higher than those in the 2D state.