• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1283-1287
• /
• 2003

Reverse engineering technology refers to the process that creates a CAD model of an existing part using measuring devices. Recently, non-contact scanning devices have become more accurate and the speed of data acquisition has increased drastically. However, they generate thousands of points per second and various types of point data. Therefore. it becomes a important to handle the huge amount and various types of point data to generate a surface model efficiently. This paper proposes a new triangular mesh generation method using 3D grids. The geometric information of a part can be obtained from point cloud data by estimating normal values of the points. In our research, the non-uniform 3D grids are generated first for feature based data reduction based on the geometric information. Then, triangulation is performed with the reduced point data. The grid structure is efficiently used not only for neighbor point search that can speed up the mesh generation process but also for getting surface connectivity information to result in same topology surface with the point data. Through this integrated approach, it is possible to create surface models from scanned point data efficiently.

• 설비공학논문집
• /
• 제11권1호
• /
• pp.18-30
• /
• 1999

A heat transfer analysis for the two-dimensional (2-D) steady state using finite difference method (FDM) is performed to predict the thermal behavior of the primary first-wall (FW) system of fusion reactor under various geometric and thermo-hydraulic conditions, such as the beryllium (Be) armor thickness, pitch of cooling tube, and coolant velocity. The FW consists of authentic steel (type 316 stainless steel solution annealed) for cooling tubes, Cu for cooling tubes embedding material, and Be for a protective armor, based on the International Thermonuclear Experiment Reactor (ITER) report. The present 2-D analysis, the control volume discretized with hybrid grid (rectangular grid and polar grid) and Gauss-Seidel iteration method are adapted to solve the governing equations. In the present study, geometric and thermo-hydraulic parameters are optimized with consideration of several limitations. Consequently, it is suggested that the adequate pitch of cooling tube is 22-32mm, the beryllium armor thickness is 10-12mm, and that the coolant velocity is 4.5m/s-6m/s for $100^{\circ}C$ of inlet coolant temperature. The cooling tube should locate near beryllium armor. But, it would be better for locating the center of Cu wall, considering problems of material and manufacturing. Also, 2-D analysis neglecting the axial temperature distribution of cooling tube is appropriate, regarding the discretization error in axial direction.

• 물과 미래
• /
• 제28권2호
• /
• pp.115-124
• /
• 1995

수문순환과정의 해석을 위한 기본 자료로써 하천유역의 형태학적 요인들은 그 형태에 따라 다양할 뿐 아니라 광범위하여 인간의 접근이 곤란하다. 이러한 하천유역의 기하형태학적 특성을 정량화하기 위해서는 많은 시간, 경비 및 인력을 필요로 한다. 최근 컴퓨터 주변기기 및 소프트웨어의 개발로 수자원 분야에서 GIS를 이용, 유역과 유추분석을 위한 응용연구를 시작으로 수질 및 물분배 등과 같은 문제에 적용하기 시작하였으며 여기서 추출된 자료를 이용하여 수자원의 많은 공가적 분석이 시도되었다. 따라서 본 연구에서는 지형정보시스템을 이용하여 평창강 유역을 대상으로 1:250,000의 지형도를 scanning하여 vectorizing함으로서 DEM(digital elevation model)자료를 생성하였고 이를 사용하여 지형도를 이용한 유역경계를 추출하였다. 또한 추출된 자료로부터 지표유출량을 산정하기 위한 수문학적 유역특성인자들을 정량화하여 기존 자료들과 비교 검토하였다. 여기서 얻은 결과를 토대로, 수자원의 운용 및 관리를 위한 정확하고 신속한 하천유역의 기하형태학적 자료를 수문정보로 사용함으로써 지형정보시스템을 이용한 하천유역의 공간정보 즉, 수문 및 지형학적 인자의 추출과정을 자동화할 수 있는 방법을 제시하고자 한다.

• 건축역사연구
• /
• 제33권1호
• /
• pp.19-31
• /
• 2024

Jinhae is the oldest Western-style radial and grid city on the Korean Peninsula, and it also has the most defined structure to date, remaining largely unchanged and unlike any other in Korea. The Jinhae town plan was completed immediately after the signing of the Japan-Korea Treaty. Although the city of Jinhae was built by the Japanese, its overall organizational principle is clearly a radial-grid form that was established in the West. The Jinhae radial-grid planning was elaborately constructed with multiple layers of overlapping structures. It is the result of the application of geometry that creates symmetry and hierarchy in European countries, and the simultaneous consideration of road hierarchy and land form in the process of combining radial and grid forms. To reveal these points, four analyses are performed. First, the formation process of Western radial and grid streets is reviewed and compared to derive review points for Jinhae City. Second, the layout and geometric characteristics of radial streets are discussed. Third, the hierarchical characteristics and connections of grid streets are analyzed. The last part is a comparative analysis of the plan and the final realization.

• 항공우주시스템공학회지
• /
• 제3권2호
• /
• pp.24-30
• /
• 2009

MI LV1B images, geometric corrected data of COMS MI, has no time information per each line, but field of weather prediction using the MI LV1B images needs time information on it. This paper explains two calculation methods for receiving time on lines of MI LV1B images and analyzes difference between two calculation methods using simulated data.

• 인터넷정보학회논문지
• /
• 제11권5호
• /
• pp.27-35
• /
• 2010

본 논문에서는 평면 스크린을 사용할 수 없는 휴대형 프로젝터의 사용 환경에서 평면이 아닌 임의의 영사면(혹은 벽면)의 기하학적 형태에 의해 발생되는 영상의 기하학적 왜곡을 효과적으로 보정할 수 있는 방법을 제안한다. 제안한 방법에서는 먼저 격자패턴을 임의의 영사면에 영사한 후 영사면의 형태에 따라 왜곡된 격자패턴과 원본 격자패턴 간의 기하학적 관계를 나타내는 직선의 방정식을 도출한다. 다음으로 영사면의 기하학적 형태에 따라 적절하게 적용될 수 있는 원본 격자패턴의 크기를 결정하여 도출된 직선의 방정식으로부터 왜곡된 영상을 대칭적으로 보정할 수 있는 보정패턴을 생성한다. 최종적으로 프로젝터로부터 영사될 실제 영상을 격자패턴과 동일하게 분할하여 보정패턴에 맞게 미리 워핑(warping)함으로써 영사된 영상의 기하학적 왜곡을 보정한다. 제안한 방법의 성능 평가를 위하여 평면 스크린을 사용할 수 없는 영사 환경에서 자주 접할 수 있는 영사면 형태들인 기울어진 평면, 꺾인 평면 및 곡면을 대상으로 영사 영상 보정에 대한 실험을 진행하였다. 실험결과로부터 일반적으로 발생하는 몇 가지 영사면의 형태들에 인한 기하학적 왜곡들이 적절히 보정되어 제안한 방법이 영사 영상의 기하학적 왜곡을 매우 효과적으로 보정할 수 있음을 알 수 있었다.

• 전자공학회논문지B
• /
• 제31B권2호
• /
• pp.69-79
• /
• 1994

The conventional machine vision system which has uniform rectangular grid requires tremendous amount of computation for processing and analysing an image especially in 2-D image transfermations such as scaling, rotation and 3-D reconvery problem typical in robot application environment. In this study, the imaging system with nonuiformly distributed image sensors simulating human visual system, referred to as Ploar Exponential Grid(PEG), is compared with the existing conventional uniform rectangular grid system in terms of image resolution and computational complexity. By mimicking the geometric structure of the PEG sensor cell, we obtained PEG-like images using computer simulation. With the images obtained from the simulation, image resolution of the two systems are compared and some basic image processing tasks such as image scaling and rotation are implemented based on the PEG sensor system to examine its performance. Furthermore Fourier transform of PEG image is described and implemented in image analysis point of view. Also, the range and heading-angle measurement errors usually encountered in 3-D coordinates recovery with stereo camera system are claculated based on the PEG sensor system and compared with those obtained from the uniform rectangular grid system. In fact, the PEC imaging system not only reduces the computational requirements but also has scale and rotational invariance property in Fourier spectrum. Hence the PEG system has more suitable image coordinate system for image scaling, rotation, and image recognition problem. The range and heading-angle measurement errors with PEG system are less than those of uniform rectangular rectangular grid system in practical measurement range.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.378-381
• /
• 2003

Efficient development of method on a performance evaluation for machine tools has been regarded as the most important work for accuracy and quality enhancement to every user and manufacturer. A evaluation method of accuracy for machine tools has been studied recently according to the rapid increase of interest in precision machine tools. To this point of view, the circular interpolation test of machine tools is recognized as the most useful method to distinguish a dynamic accuracy of NC machine tools by ISO and ANSI/ASME, etc. In this paper, we have studied and developed the form measurement system with grid encoder to analyse the final accuracy of NC machine tools. we have analyzed the servo system error and geometric error of NC machine tools through measuring a dynamic error signal by this system. and then we verified the experimental result and enhanced the reliability by means of comparing the characteristics of the developed system with the kinematic ball-bar system.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제21권2호
• /
• pp.89-107
• /
• 2017

In this paper, we have proposed a modified Marker-And-Cell (MAC) method to investigate the problem of an unsteady 2-D incompressible flow with heat and mass transfer at low, moderate, and high Reynolds numbers with no-slip and slip boundary conditions. We have used this method to solve the governing equations along with the boundary conditions and thereby to compute the flow variables, viz. u-velocity, v-velocity, P, T, and C. We have used the staggered grid approach of this method to discretize the governing equations of the problem. A modified MAC algorithm was proposed and used to compute the numerical solutions of the flow variables for Reynolds numbers Re = 10, 500, and 50000 in consonance with low, moderate, and high Reynolds numbers. We have also used appropriate Prandtl (Pr) and Schmidt (Sc) numbers in consistence with relevancy of the physical problem considered. We have executed this modified MAC algorithm with the aid of a computer program developed and run in C compiler. We have also computed numerical solutions of local Nusselt (Nu) and Sherwood (Sh) numbers along the horizontal line through the geometric center at low, moderate, and high Reynolds numbers for fixed Pr = 6.62 and Sc = 340 for two grid systems at time t = 0.0001s. Our numerical solutions for u and v velocities along the vertical and horizontal line through the geometric center of the square cavity for Re = 100 has been compared with benchmark solutions available in the literature and it has been found that they are in good agreement. The present numerical results indicate that, as we move along the horizontal line through the geometric center of the domain, we observed that, the heat and mass transfer decreases up to the geometric center. It, then, increases symmetrically.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.335-340
• /
• 2010

In this paper development of an automatic grid generation program for flow field calculation around 3D wing is described and its application is also introduced. The program is developed by using JAVA programming language and a graphic library, JOGL, and it can be usee either as an application program on a local computer or as a applet in the network environment. Currently, The program provides NACA series 4-digit airfoils as the wing cross-section shape and it offers a non-complicated GUI program which can easily generate structured grids for wings based on user's parameter input. Grid generated by the program can be selected as one of two types; O-type and C-type. In this research advancing layer method(ALM) augmented by elliptic smoothing method is used for the FLUENT. It is shown that by using current program high-quality structured grids around 3D wings can be easily generated, and typical grid generation results and flow solutions are demonstrated. Study on effects of geometric parameters on flow field is also tried by changing major wing parameters such as incidence angle type of wing-tip and sweepback angle.