• 한국환경복원기술학회지
• /
• 제15권2호
• /
• pp.9-18
• /
• 2012

The street canyon forms the geometric unit of the built environment. The geometry makes up urban canyons and it influences the urban climate. In order to investigate the wind characteristics of urban street canyon at Dogok-dong, Gangnam-gu in Seoul, the wind direction and wind speed data were observed and analyzed by using 2-D ultra sonic and propeller wind monitor from May 5, 2010 to May 4, 2011. The results show that the prevailing wind direction was west at Station A(Military Mutual Aid Association Building), southwest at Station B(Sookmyung Girls' High School) and the wind speed of Station B was higher than Station A. There were diurnal differences about prevailing wind direction between two stations : it was westerly wind at Station A for a whole day, but at Station B only from 22 : 00 to 04 : 00. However, Station B is different from Station A at other time. At Station B, it was easterly wind from 04 : 00 to 12 : 00, southwesterly wind from 12 : 00 to 22 : 00. In terms of seasonal(except winter) frequency, the spring shows the highest frequency and fall was the next.

• 융합보안논문지
• /
• 제14권5호
• /
• pp.49-56
• /
• 2014

본 논문에서는 기존의 제안된 LDP(Local Directional Pattern)에 기반하여 지역적인 얼굴특징을 표현하는 방법을 제안한다. 제안된 방법은 눈과 입과 같은 얼굴의 영구적인 특징과 표정이 변하면서 발생하는 일시적인 특징을 효과적으로 표현할 수 있도록 얼굴특징별로 크기와 형태를 달리하는 중첩 가능한 블록을 설정하고 이를 바탕으로 얼굴 특징벡터를 구성한다. 제안된 중첩 블록설정 및 특징 표현 방법은 기하학적 특징을 기반으로 하는 접근 방법의 장점을 수용할 뿐만 아니라 각 얼굴특징의 움직임 특성을 이용하여 얼굴검출에 대한 오류를 수용할 수 있고, 블록사이즈의 가변성으로 인한 공간정보를 유지할 수 있어 표본오차를 줄일 수 있는 장점이 있다. 실험결과, 제안된 방법은 기존 방법에 비해 인식률이 향상됨을 확인하였고, 기존 얼굴 특징 벡터보다 길이가 짧기 때문에 연산량 또한 감소하는 것을 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권4호
• /
• pp.254-262
• /
• 2011

This study aims to optimize an arrangement of ship compartments with knowledge-based systems. Though great attention has been shown to the optimization of hull forms in recent years, the study on arrangement design optimization has received relatively little attention. A ship is both an engineering system and a kind of assembly of many spaces. This means that, to design an arrangement of ship compartments, it is necessary to treat not only geometric data but also knowledge on topological relations between spaces and components of a ship. In this regard, we select a suitable knowledge representation scheme for describing ship compartments and their relations, and then develop a knowledge-based system using expert system shell. This new approach is applied to create design variations for optimization on an arrangement of a pressure hull of a submerged vehicle. Finally, we explicate how our approach improves the design process.

• 대한조선학회논문집
• /
• 제51권2호
• /
• pp.148-153
• /
• 2014

Submerged bodies such as autonomous underwater vehicles (AUV) or remotely operated vehicles (ROV) are widely used in various fields of exploring underseas. Those bodies keep ballasting and deballasting for stable navigation and operation. Identifying the internal volumetric spaces of the bodies is a primary step for such an operation. Unfortunately, most CAD models given to the engineer do not properly represent the compartments since each face of a compartment exists as an independent entity rather than as a face that belongs to the compartment. In this paper, an algorithm that automatically identify the faces as a group that forms a closed volumetric space, i.e., a compartment is presented. A submerged body is sliced into a number of cross sections. Each sliced section is analyzed to yield closed loops that are sections of the compartment. Then, the associated closed loops are gathered along the longitudinal direction to form a compartment. The algorithm presented is shown to provide a practical and reasonable solution that can readily be used in various applications.

• 대한화학회지
• /
• 제55권6호
• /
• pp.940-951
• /
• 2011

Reaction of 1-methylpyrimidine-(1H,3H,5H)-2,4,6-trione (1-MBA 1) as an unsymmetrical barbituric acid with cyanogen bromide and various aldehydes in the presence of triethylamine and/or pyridine afforded diastereomeric mixtures of new class of heterocyclic stable 5-aryl-1,1'-dimethyl- and 5-aryl-3,1'-dimethyl-1H,1'H-spiro[furo[2,3-d]pyrimidine-6,5'-pyrimidine]2,2',4,4',6'(3H,3'H,5H)-pentaones which are dimeric forms of 1-methyl barbiturate at the range of $0^{\circ}C$ to room temperature. In the reaction of some aldehydes with 1-MBA and BrCN were afforded a mixture of diastereomers. Another two aldehydes such as 4-cyano- and 2-hydroxybenzaldehydes gave exclusively two diastereomers in which binded to the salt of triethylammonium hydrobromide by intermolecular H-bond in ratio of 1:1. 4-Hydroxybenzaldehyde and 2-pyridinecarbaldehyde gave exclusively one diastereomer under the same condition. Aldehydes possessing strong electron-donor were produced exclusively two geometric isomers of Knoevenagel adduct (E- and Z-isomers). The structures of compounds were deduced by $^1H$ NMR, $^{13}C$ NMR and FT-IR spectroscopy. Mechanism of the formation is discussed.

• 한국실내디자인학회논문집
• /
• 제17권3호
• /
• pp.156-164
• /
• 2008

Through staggering advancements of technology and network as we know them as digital revolution, we have established a foundation of space in which we can express reality by eliminating the boundaries between expression, space, and movement. There are many ongoing approaches that aim to overcome the physically-fixed property of space where the mathematical-geometric notion of Voronoi Diagram is one of them. Although the repetitive increment based on self-organization during the process in which space is generated by the Voronoi Diagram forms a pattern and focuses on the formation, its pattern is not restricted to a single method of expression but evolves over self-control. The result of having analyzed spaces generated by the Voronoi Diagram in this study can be summarized as follows. First, the Voronoi computation method with self-organization property creates multiple levels, increments, and evolves through feedbacks among changes with the slightest order and in the absence of control. Secondly, after forming a pattern through such feedbacks comes the differentiation phase due to the presence of different properties. Thirdly, a space that has gone through the generation process retransforms through active interaction between changes and it obtains ambiguous boundaries and a repetitive pattern. This leads to an evolution of space through repetitive increments based on self-organization. Such flexible space creation is supported by various digital technologies where we believe a converging application of these studies, sciences, engineering concepts, and space design is and effective and new method in terms of space creation.

• 한국정보통신학회논문지
• /
• 제8권3호
• /
• pp.714-720
• /
• 2004

얼굴검출 작업에서 다양한 형태를 가지는 후보영역을 정사하기 위한 기하학적 연산과정이 수반된다. 본 논문에서는 컬러영상에서 색도 분포 특성을 이용함으로써 얼굴가림과 방향에 영향을 받지 않고 얼굴 유효특징점을 검출할 수 있는 알고리즘을 제안한다. 제안한 알고리즘은 얼굴의 특징점 주변에서 Cb와 Cr이 일관적인 색도차를 가진다는 점에 착안한 것으로써, 기본 색도차 영상인 Eye맵 마스크에서 특징점을 효과적으로 강조시킬 수 있는 평균-그레이 모폴로지 연산을 수행한다. 실험을 통해, 제안한 방법이 가변적 형태의 후보영역에 대해서도 강인하게 얼굴의 유효특징점을 검출할 수 있음을 확인할 수 있었다.

• 한국실내디자인학회논문집
• /
• 제15권1호
• /
• pp.55-62
• /
• 2006

Andree Potman is one of the few French female interior designers who has successfully extended her design territory beyond France into a more global context. Unlike other interior designers Potman has a very unique and eclectic background. She has studied music, worked as a journalist, talented in redeveloping designs that were unknown at that time such as design's of Eileen Gray, Mallet-Stevenson, and many more. Starting her career as an interior designer we can see her designs not only in France but also in many other countries such as America, Japan, and Germany. However her name is not that familiar to the designers in Korea. Therefore the current study focuses on the introduction and understanding of Potman's designs in regards to the relationship between interior space and objets that have made her designs so called 'Potman Style'. In order to accomplish the objective the researcher first studied means and use of ejects in interior space and next examined characteristics of Potman's designs including lighting fixtures, products, furnitures, and Interior designs. Finally, by using constant comparative analysis four categories (esthetics of emptiness, repetition of geometric forms, contrast in style, and focus with lighting) of design methods are revealed as the characteristics of interior elements as objects in Andree Potman's interior designs.

• 한국의상디자인학회지
• /
• 제24권1호
• /
• pp.99-112
• /
• 2022

This study analyzed how Kruchenikh's opera, "Victory over the Sun", performed in Saint Petersburg, Russia, in 1913, contributed to the birth of Malevich's Suprematism in 1915, and how the forms and features of the costumes were expressed in the opera's content. The results of the study are as follows: First, the theoretical background of the opera, "Victory over the Sun" was limited to Suprematism and non-objective art, which was divided into analytical cubism, cubo-futurism, and Uspensky's four-dimensional concept of space. Second, to reveal that Suprematism, appeared in the form of non-objective abstract art, was possible with the set and costume design of "Victory over the Sun," the set design was analyzed. Third, to reveal that Malevich's Suprematism was influenced by "Victory over the Sun," the study considered the characteristics of Suprematism in "Victory over the Sun". Finally, Malevich's Suprematism art costumes expressed in "Victory over the Sun" were divided into geometric spatial structures, images of black & white, mechanical human images, and images of warriors and the characteristics of each costume were considered. Malevich's "Victory over the Sun" showed a significant impact not only on the birth of Suprematism but also on the development of the non-objective art & costumes.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.52-61
• /
• 2017

Considering its significant impact on the cost and schedule of construction projects, formwork as one part of temporary facility categories in construction should be arranged precisely. Current practice in the formwork planning is often conducted manually and repetitively, causing low efficiency and time waste. This study proposes an automated framework to generate more accurate and detailed formwork plans by utilizing information from building information modeling (BIM) considering the adequate geometric and semantic information provided by the BIM model. The dimensions and quantities information of elements in a building can be extracted automatically. Then, a rule is prepared for calculating the required forms erected around elements based on the contact areas. Finally, an algorithm of integrating first fit decreasing (FFD) with coordinated bottom left (CBL) is applied to automatically generate the formwork plan. The BIM-based automated planning framework is demonstrated by an illustrative example. The results show that the proposed framework can generate the formwork plan accurately and automatically, and significantly improve the efficiency in the formwork plan and reuse.