• International Journal of Fluid Machinery and Systems
• /
• v.10 no.3
• /
• pp.218-226
• /
• 2017

Severe radial thrust under off-design operating conditions can be a harmful factor for centrifugal pumps. In the present work, effects of geometry of a double volute casing on the hydrodynamic performance of a centrifugal pump have been investigated focusing on off-design conditions. Three-dimensional steady Reynolds-averaged Navier-Stokes analysis was carried out by using shear stress transport turbulence model. Numerical results for the hydrodynamic performance of the centrifugal pump were validated compared with experimental data. The hydraulic efficiency and radial thrust coefficient were used as performance parameters to evaluate the hydrodynamic characteristics of the centrifugal pump. The cross-sectional area ratio of the volute casing, the expansion coefficient of the rib structure, the distance between the rib starting point and volute entrance, and radius and width of the volute entrance, and length of the rib structure, were selected as geometric parameters. Results of the parametric study show that the performance parameters are significantly affected by the geometric variables and operating conditions. Optimal configurations of the double volute casing based on the design of experiments technique show outstanding performance in terms of the efficiency and radial thrust coefficient.

• The Korean Journal of Applied Statistics
• /
• v.26 no.1
• /
• pp.187-200
• /
• 2013

In this paper, we deal with the problem of deciding a hedging volatility for ATM plain options when we hedge those options based on geometric Brownian motion. For this, we study the relation between hedging volatility and hedge profit&loss(P&L) as well as perform Monte Carlo simulations and real data analysis to examine how differently hedge P&L is affected by the selection of hedging volatility. In conclusion, using a relatively low hedging volatility is found to be more favorable for hedge P&L when underlying asset prices are expected to be range bound; however, a relatively high volatility is found to be favorable when underlying asset prices are expected to move on a trend.

• Journal of Fashion Business
• /
• v.11 no.6
• /
• pp.11-23
• /
• 2007

This study has investigated the stream of consciousness and the actual conditions of tattoo. A survey of 466 people has found that female prefer tattoo, and a group of age between 21 and 41 and professionals are more interested in it. Both past and present of attitude consciousness about tattoo understand it dynamic and severe. However, it is considered as a feminine these days, whereas it had been understood as a masculine image in the past, which means a decrease of symbolism by gender. Also, in comparison with the past, the current thoughts on tattoo are getting hopeful and affirmative that we could know the attitude about tattoo changes. A survey of 106 tattooists shows that most people get a temporary tattoo, and permanent, semi-permanent tattoo came next. The most preferred area were eyebrows, are, shoulder, forearm, back of hand and waist, and a main reason of getting tattoo were for beauty and ostentation. For the level of satisfaction, 70.7% of the people polled said they were satisfied with it, and male preferred a pattern of animal, geometric and plant while female preferred a pattern of plant, animal, and geometric in order. So far, by the lack of basic information and data, efficiency value of tattoo is in negative view. Thus, it would be required to enhance a level of understanding tattoo focusing on the positive side like a new life style, sense of value, sensation and emotion of contemporary people, and generalize it by providing various technical information and knowledge of beauty image effect accompanied with tattoo.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.115-125
• /
• 2003

The design methodology of plastic injection molding die has been gradually moved from two-dimensional line drawings to three-dimensional solid models. The 3D design gives many benefits, a few of which are: ease of design change, data associativity from concept design to final assembly. In the paper represented is the implementation of a program which automatically generates 3D mold-bases and cooling-lines, conforming to given geometric constraints. It utilized a commercial CAD software and the related API(application program interface) libraries. We constructed a DB(database) of typical mold-bases assembled from standard parts, from which the geometry (position & dimension) of a mold-base and composed parts can be automatical]y determined by a few key parameters. Also we classified cooling lines into several typical types and constructed a DB, from which the position of cooling lines is automatically determined. The research is expected not only to simplify construction of a 3D mold-base model including cooling lines but also to reduce design efforts, by way of databases and automatized determination of geometric dimensions.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.252-256
• /
• 1998

Accurate mapping of satellite images is one of the most important Parts in many remote sensing applications. Since the position and the attitude of a satellite during image acquisition cannot be determined accurately enough, it is normal to have several hundred meters' ground-mapping errors in the systematically corrected images. The users which require a pixel-level or a sub-pixel level mapping accuracy for high-resolution satellite images must use a number of Ground Control Points (GCPs). In this paper, the performance of two geometric correction algorithms is tested and compared. One is the polynomial warping algorithm which is simple and popular enough to be implemented in most of the commercial satellite image processing software. The other is full camera modelling algorithm using Physical orbit-sensor-Earth geometry which is used in satellite image data receiving, pre-processing and distribution stations. Several criteria were considered for the performance analysis : ultimate correction accuracy, GCP representatibility, number of GCPs required, convergence speed, sensitiveness to inaccurate GCPs, usefulness of the correction results. This paper focuses on the usefulness of the precision correction algorithm for regular image pre-processing operations. This means that not only final correction accuracy but also the number of GCPs and their spatial distribution required for an image correction are important factors. Both correction algorithms were implemented and will be used for the precision correction of KITSAT-3 images.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.10
• /
• pp.4042-4059
• /
• 2020

The development of new multimedia techniques such as 3D printing is increasingly attracting the public's attention towards 3D objects. An optimized robust and imperceptible watermarking method based on Ant Colony Optimization (ACO) and Weber Law is proposed for 3D polygonal models. The proposed approach partitions the host model into smaller sub meshes and generates a secret watermark from the sub meshes using Weber Law. ACO based optimized strength factor is identified for embedding the watermark. The secret watermark is embedded and extracted on the wavelet domain. The proposed scheme is robust against geometric and photometric attacks that overcomes the synchronization problem and authenticates the secret watermark from the distorted models. The primary characteristic of the proposed system is the flexibility achieved in data embedding capacity due to the optimized strength factor. Extensive simulation results shows enhanced performance of the recommended framework and robustness towards the most common attacks like geometric transformations, noise, cropping, mesh smoothening, and the combination of such attacks.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.2
• /
• pp.165-172
• /
• 2003

IKONOS satellite images are particularly well suited for stereo feature extraction. But, because IKONOS doesn't offer information about the satellite ephemeris and attitude, we have to use IKONOS RPC(Rational Polynomial Coefficients) data for 3-D feature extraction. In this study, it was intended to increase the accuracy and the efficiency in application of high resolution satellite images. Therefore, this study develop the program to extract 3-D feature information and have analyzed the geometric accuracy of the IKONOS satellite images by means of the change with the number, distribution and height of GCPs. This study will provide basic information for luther studies of the accuracy correction in IKONOS and high resolution satellite images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.1
• /
• pp.85-94
• /
• 1995

Remote Sensing plays an Important role when we gather and extract many informations about development of the land, circumstances of urbans, land use, surveying resource and marine, geological survey, classification of trees, and condition of trees. For geometric collection to improve the accuracy of positioning with data in the processing of projection treatment by remote sensing. Authors have compared two methods by maps and GPS. Thereafter authors study exact transmation of coordinates in the projection of satellite. Authors have tried to gain improvability of difficulties and problems in the real topography, and Authors consider the coordinates system about global superposition by satellite image.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.5
• /
• pp.428-434
• /
• 2016

A lot of drawings for pipe construction and installation are needed to construct plant process system on the offshore plant structures. Depending on their scale or complexity, the required number of drawings related pipes sometimes amounts to several hundreds of thousands. Most major shipyards, therefore, have their own system which can automatically depict pipes’ geometric, manufacturing, and BOM(Bill of Material) information on the drawings. However, as the complexity and absolute quantity in the isometric region on the drawings is increased, the information extraction from the customized DB and positioning at the typical locations does not get to be enough to avoid the overlap between geometric contours, labels, and symbols. For this reason, the novel methods to arrange additional annotations without overlaps are presented in the paper. This approach is expected to increase the readability and legibility of the drawing and prevent the human error, and finally decrease the time-consuming and tedious jobs which are unnecessarily required to designers.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.1 s.15
• /
• pp.73-84
• /
• 2000

Map matching technique is an essential part of the car navigation and other related positioning fields such as dead reckoning and GPS data logging upon the GIS database. This paper is to break down map matching techniques, to categorize them, and to propose a simple technique for GPS based map matching technique. For categorization of techniques, two approaches have been adopted. One is to only use geometric information, and the other is to use both geometric and topological information. Some pros and cons of each method have been described. In addition, a simple map matching technique, set forth in this paper, has been introduced for properly utilizing the advantage of GPS points after the absence of the chronic problem of selective availability, which had been prevailed recently. Some research opportunities and problems of the technique have also been discussed.