• 제목/요약/키워드: Geological Rock

검색결과 870건 처리시간 0.03초

Assessment of rock slope stability by slope mass rating (SMR): A case study for the gas flare site in Assalouyeh, South of Iran

  • Azarafza, Mohammad;Akgun, Haluk;Asghari-Kaljahi, Ebrahim
    • Geomechanics and Engineering
    • /
    • 제13권4호
    • /
    • pp.571-584
    • /
    • 2017
  • Slope mass rating (SMR) is commonly used for the geomechanical classification of rock masses in an attempt to evaluate the stability of slopes. SMR is calculated from the $RMR_{89-basic}$ (basic rock mass rating) and from the characteristic features of discontinuities, and may be applied to slope stability analysis as well as to slope support recommendations. This study attempts to utilize the SMR classification system for slope stability analysis and to investigate the engineering geological conditions of the slopes and the slope stability analysis of the Gas Flare site in phases 6, 7 and 8 of the South Pars Gas Complex in Assalouyeh, south of Iran. After studying a total of twelve slopes, the results of the SMR classification system indicated that three slope failure modes, namely, wedge, plane and mass failure were possible along the slopes. In addition, the stability analyses conducted by a number of computer programs indicated that three of the slopes were stable, three of the slopes were unstable and the remaining six slopes were categorized as 'needs attention'classes.

석조문화재의 특징과 암석에 대한 지질학적 연구 (III) -경기도 하남시, 양평군 및 여주군을 중심으로- (Characteristics of Stone-monuments and Geological Studies on the Rocks for Conservation(III) - Hanam city, Yangpyeong-gun and Yeoju-gun, Gyeonggi-do -)

  • 이상헌;박경립
    • 보존과학회지
    • /
    • 제4권1호
    • /
    • pp.11-42
    • /
    • 1995
  • Stone-monuments, distributed in this area, have been investigated and studied on the characteristics and the rock phases in the geological and conservational points of view. Most of them may have been built from the end of the Shilla Kingdom to the Koryeo Kingdom, which are based on the typical characteristics of the form. The used rocks in these monuments are mainly biotite granite of the Jurassic age which is widely distributed around the area. Black slate and marbles are also used in some monuments, which may be obtained from other areas. The biotite granite of massive and coarse texture contains often inclusions of biotite aggregates or fragments of dioritic rock phase. However, the biotite granite in the area may be very weak to the chemical weathering so that irregular rock surface shows generally $2\~3mm$ relief. The irregular relief is mainly due to different relative degree on the chemical weathering according to the kind of minerals especially quartz, feldspar and biotite. The chemical weathering is also influenced by organisms. For conservation, they must be scientifically considered based on the characteristics, kind of the rock phase, factors on the weathering process, situation in situ or being transported, and protection.

  • PDF

양산-동래 단층 지역의 암석에 대한 분광학적 연구 (Spectral Reflectivity on Geological Materials in Yangsan-Dongrae Fault Area)

  • 姜必鍾;智光薰
    • 대한원격탐사학회지
    • /
    • 제3권1호
    • /
    • pp.1-10
    • /
    • 1987
  • The study was performed to recognize the most preferable spectral chennels for discriminating geological materials using the portable radiometer. The portable radiometer covers the visible and short infrared regions from approximately 0.4 to 2.5 microns which are coincided with Landsat TM, and the rock samples used for the study are pyrophylites, andesites, granite, granodiorite and silicified sedimentary rocks which are collected in Yangsan-Dongrae fault area. The analysis of the rock sample provides a preliminary basis for determining the wavelength regions showing diagnostic spectral features and for discriminating hydrothermal altered rocks from the unaltered rocks. The measurement of spectral of spectral reflectance for the rock samples was carried out in the laboratory which environment condition such as temperature, light sources, and humidity are constant. The analysis of the measured data was based on correlation between the reflectance value of the rock samples, and the follow discriptions are output of the study. 1) Pyrophyllite shows absorption at 0.83 $\mu\textrm{m}$ due to the oxidation of pyrite, and absorption at 2.22 $\mu\textrm{m}$ due to OH. 2) The altered rocks have generally higher reflectance than the unaltered rocks. 3) The ratio mesurement of pyrophyllites shows strong absorption at band 5/6 and band 6/4(in Landsat TM 5/7, 7/4). The ratio 1/5(Landsat TM 1/5) may be useful to discriminate andesite from the granite.

암종별 특성이 고려된 국내절취사면의 유지관리방안에 관한 연구 (A Study on the Domestic Cut Slope Management Plan Reflecting Quality according to Rock Types)

  • 신창건;이소영;이송
    • 한국지반공학회논문집
    • /
    • 제24권2호
    • /
    • pp.37-44
    • /
    • 2008
  • 절취사면의 붕괴는 지질 및 지형적인 요건과 수리적인 요건 등 매우 다양한 요인들이 복합적으로 작용하여 발생한다. 그러나 현행 절취사면의 사전 및 사후 유지관리 단계에서 복잡한 지질조건에 따른 안정성 저해에 미치는 영향을 평가함에 있어 매우 미흡한 실정이다. 본 연구에서는 국내 유지관리 주체별 현황 및 암종별 붕괴 특성 및 유지관리 사례분석 등을 실시하고 이를 통하여 암종별 특성이 고려된 국내 절취사면의 유지관리 방안을 제시하고자 한다.

NATM 터널의 굴착면 전방 지질 평가를 위한 대구경 심발공 탐사 시스템 개발 및 적용 사례 (Development and Application of Large-diameter Cut-hole Exploration System for Assessment of the Geological Condition beyond NATM Tunnel Face)

  • 김민성;정진혁;이제겸;박민선;박정현;이승원
    • 터널과지하공간
    • /
    • 제31권1호
    • /
    • pp.1-9
    • /
    • 2021
  • 최근 도시화가 가속화됨에 따라 지하공간 개발을 위한 굴착공사가 지속적으로 이루어지고 있으며, 암반 굴착 시 해당 구간의 지질 상태를 정확히 파악하는 것은 안전한 시공을 위해 매우 중요하다. 본 논문에서는 터널 발파 진동을 저감시키기 위해 대구경 무장약공을 천공하는 MSP 공법을 활용하여 굴착면 전방의 지질 특성을 파악하기 위해 천공경로 및 지반탐사 복합시스템을 개발하였다. 제안된 탐사 시스템은 NATM 터널 공사를 위해 천공된 대구경 심발공을 활용해 굴착면 전방 50 m 구간의 지질 정보를 획득할 수 있다는 큰 장점이 있다. 또한, 제안된 탐사 시스템을 현장에 적용하고 대구경 무장약공 내부를 모니터링하여 터널 굴착면 전방의 지질 상태를 평가한 사례를 소개한다.

암석과 토층 경계면의 전단강도 특성연구 (A Study on Characteristics of Shear Strength in Rock-soil Contacts)

  • 이수곤
    • 한국환경복원기술학회지
    • /
    • 제4권3호
    • /
    • pp.49-54
    • /
    • 2001
  • It is common that the soil layer is a few meters below the earth's surface and the rock mass is below the soil layer in the view of geological characteristics in Korea. And the boundary between rock and soil is clearly divided. When dealing with the stability of rock masses, as in the case of rock slopes or dam foundations, the majority of the collapses is not within the soil layer, but within the soil-rock boundary. Therefore it is important to identify the shear strength characteristics between soil-rock boundary. And then in the method of reinforcement on landslide this chose a cut slope near Daemo elementary school in Seoul, surveyed shear strength between soil-rock contacts and considered a large scale collapse using a limit equilibrium method.

  • PDF

화강암지역의 암반블록규모 단열체계 분포특성 연구 (Characterization of the Spatial Distribution of Fracture System at the Rock Block Scale in the Granitic Area)

  • 김경수;배대석;김천수
    • 터널과지하공간
    • /
    • 제12권3호
    • /
    • pp.198-209
    • /
    • 2002
  • To assess deep geological environment for the research and development of hish-level radioactive waste disposal, six boreholes of 3" in diameter were installed in two granitic areas. An areal extent of the rock block scale in the study sites was estimated by the lineament analysis from satellite images and shaded relief maps. The characterization of fracture system developed in rock block scale was carried out based on the acoustic televiewer logging in deep boreholes. In the Yuseong site, the granite rock mass was divided into the upper and lower zones at around -160m based on the probabilistic distribution characteristics of the geometric parameters such as orientation, fracture frequency, spacing and aperture size. Since the groundwater flow is dependent on the fracture system in a fractured rock mass, the correlation of the fracture frequency and cumulative aperture size to the hydraulic conductivity was also discussed.

암 발파설계 프로그램 개발에 관한 연구 (A Study on Development of Rock Blasting Design Program)

  • 강추원
    • 한국암반공학회:학술대회논문집
    • /
    • 한국암반공학회 2000년도 암반공학문제의 수치해석(Numerical Analysis in Rock Engineering Problems)
    • /
    • pp.223-228
    • /
    • 2000
  • 본 연구에서는 발파 설계를 쉽게 하기 위하여 RBD(Rock Blasting Design)프로그램을 개발하였다 이 프로그램은 시험 발파 설계, 벤치 발파 설계, 그리고 발파 진동 해석의 기능을 가지며, 지질 특성 값과 발파 상수를 데이터베이스로 제공하고, 여러 상수 값을 재 입력함으로써 보다 빠르고 간편하게 설계할 수 있고 한번 입력한 상수 값을 사용자가 재사용 할 수 있도록 하였다.

  • PDF