• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.591-598
• /
• 2017

This study is for coordinates analysis(geocentric and rectangular coordinate) of Korean geodetic VLBI which has been operated by NGII (National Geographic Information Institute) in Republic of Korea since 2014. The purpose of this study is a fundamental research to determine the Korean geodetic datum. The VLBI data recorded from September 29th 2014 to July 31th 2017, total approximately a hundred of VLBI databases, is used to calculate daily positions and position rates. The VLBI coordinates are based on ITRF(2000,2005,2008,2014) with epochs of the first Korean VLBI observation date(September 29th 2014) and Korean Geodetic Datum(January 1st 2002). And as a results of VLBI observation, Korean VLBI coordinate movement velocity of 3.1cm/yr in the direction of $112.4^{\circ}$.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.47-54
• /
• 2015

In this study, we developed strategies for pre-processing GNSS data for the purpose of separating geodetic factors from crustal deformation due to the earthquakes. Before interpreting GNSS data analysis results, we removed false signals from GNSS coordinate time series. Because permanent GNSS stations are located on a large tectonic plate, GNSS position estimates should be affected by the tectonic velocity of the plate. Also, stations with surrounding trees have seasonal signals in their three-dimensional coordinate estimates. Thus, we have estimated the location of an Euler pole and angular velocities to deduce the plate tectonic velocity and verified with geological models. Also, annual amplitudes and initial phases were estimated to get rid of those false annual signals showing up in the time series. By considering the two effects, truly geodetic analysis was possible and the result was used as preliminary data for analyzing post-seismic deformation of the Korean peninsula due to the Tohoku-oki earthquake.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.5
• /
• pp.313-319
• /
• 2021

The national geodetic reference frame of Korea was adopted in 2003, which is referenced to ITRF (International Terrestrial Reference Frame) 2000 at the epoch of January 1, 2002. For precise positioning based on the satellites, it should be thoroughly maintained to the newest global reference frame. Other than plate tectonic motion, there are significant events or changes such as earthquakes, antenna replacement, PSD (Post-Seismic Deformation), seasonal variation etc. We processed three years of GNSS (Global Navigation Satellite System) data(60 NGII CORS stations, 51 IGS core stations) to produce daily solutions minimally constrained to ITRF. From the time series of daily solutions, the sites with unexpected discontinuity were identified to set up an event(mostly antenna replacement). The combined solution with minimum constraints was estimated along with the velocity, the offsets, and the periodic signals. The residuals show that the surrounding environment also affects the time series to a certain degree, thus it should be improved eventually. The transformation parameters to ITRF2014 were calculated with stability and consistency, which means the national geodetic reference frame is properly aligned to the global reference frame.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.2
• /
• pp.123-130
• /
• 1985

This paper was conducted for the purpose of evaluating the accuracy of the observed time difference in Loran-C when the ground wave propagated on the surface included both land sea. The time difference of X and Y station in North East Pacific Chain GRI 5970 was measured at 25 points in Cheju areas. The results obtained are as follows: (1) The errors of time difference for M-X pair are increased when the Loran-C wave propagates above 500m heights of Hanla mountain on propagation path between the observed point and master or X, Y slave station. (2) The errors of time difference for M-X pair are able to decrease by way of correction for the propagation velocity and the geodetic datum, but errors of the time difference for M-Y pair very irregularly because irregular terrain include in propagation path from X station and propagation path from Y station is twice longer than X station. (3) It is confirmed that accuracy of Loran-C fix can elevate by the way of all correction for a geodetic datum transformation, the propagation velocity with refractive index of radio wave and the propagation velocity over land.

• Journal of Astronomy and Space Sciences
• /
• v.30 no.4
• /
• pp.315-320
• /
• 2013

Space geodetic techniques can be used to obtain precise shape and rotation information of the Earth. To achieve this, the representative combination solution of each space geodetic technique has to be produced, and then those solutions need to be combined. In this study, the representative combination solution of very long baseline interferometry (VLBI), which is one of the space geodetic techniques, was produced, and the variations in the position coordinate of each station during 7 years were analyzed. Products from five analysis centers of the International VLBI Service for Geodesy and Astrometry (IVS) were used as the input data, and Bernese 5.0, which is the global navigation satellite system (GNSS) data processing software, was used. The analysis of the coordinate time series for the 43 VLBI stations indicated that the latitude component error was about 15.6 mm, the longitude component error was about 37.7 mm, and the height component error was about 30.9 mm, with respect to the reference frame, International Terrestrial Reference Frame 2008 (ITRF2008). The velocity vector of the 42 stations excluding the YEBES station showed a magnitude difference of 7.3 mm/yr (30.2%) and a direction difference of $13.8^{\circ}$ (3.8%), with respect to ITRF2008. Among these, the 10 stations in Europe showed a magnitude difference of 7.8 mm/yr (30.3%) and a direction difference of $3.7^{\circ}$ (1.0%), while the 14 stations in North America showed a magnitude difference of 2.7 mm/yr (15.8%) and a direction difference of $10.3^{\circ}$ (2.9%).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.2
• /
• pp.167-172
• /
• 1990

A number of studies for the improvement of the accuracy of the Loran C fix were carried out previously. But most studies were preformed when a ship was at anchorage, or in port. To investigate the accuracy of the Loran C fix when a ship was underway and in port, a series of observation was made on the route between Pusan and Cheju from Oct. 1988 to Oct. 1989. The obtained results are summerized as follows: 1. There is little difference in the accuracy of the Loran C fix by daytime and night, and the higher the mountain nearby ship, the greater the error of ship's position. 2. When a ship is at anchorage and underway, and the accuracy of ship's position is almost not affected by course while underway. 3. In order to promote the accuracy of the fixed position, a navigator must correct the propagation velocity and the geodetic system simultaneously, but in this paper the authors find that a most accurate position can be obtained by converting the geodetic system only.

• Advances in concrete construction
• /
• v.10 no.3
• /
• pp.247-256
• /
• 2020

In this paper the possibility of using different regression models to predict the mechanical properties of limestone concrete after exposure to high temperatures, based on the results of non-destructive techniques, that could be easily used in-situ, is discussed. Extensive experimental work was carried out on limestone concrete mixtures, that differed in the water to cement (w/c) ratio, the type of cement and the quantity of superplasticizer added. After standard curing, the specimens were exposed to various high temperature levels, i.e., 200℃, 400℃, 600℃ or 800℃. Before heating, the reference mechanical properties of the concrete were determined at ambient temperature. After the heating process, the specimens were cooled naturally to ambient temperature and tested using non-destructive techniques. Among the mechanical properties of the specimens after heating, known also as the residual mechanical properties, the residual modulus of elasticity, compressive and flexural strengths were determined. The results show that residual modulus of elasticity, compressive and flexural strengths can be reliably predicted using an artificial neural network approach based on ultrasonic pulse velocity, residual surface strength, some mixture parameters and maximal temperature reached in concrete during heating.

• Journal of the Korean Geophysical Society
• /
• v.9 no.3
• /
• pp.151-158
• /
• 2006

Highly accurate surface velocity estimation using modern geodetic techniques plays very important role in the geological and geophysical interpretation. Researches with GPS are ongoing in many countries of the world. This study aims to estimate the amount of crustal deformation and the direction of deformation in the Korean Peninsula and in its neighbor. We used GAMIT that is a comprehensive GPS analysis package developed at MIT. Then, a Global Kalman filter called GLOBK is used to combine the results from GAMIT and to estimate the relative and absolute velocity vector for the crustal deformations. To estimate station velocity accuracy and reliably, it is extremely important to pay great attention to the reference frame. Firstly, using the Suwon (SUWN) of Eurasian plate as main frame, we estimate the relative amount of crustal deformation and a direction of Eurasian plate and North American plate, Secondly, using ITRF 2000 as main frame, we estimate the absolute crustal deformation of Eurasian plate and North American plate. The continent of Eurasian where has the Korean Peninsula deforms 33.36 mm per year to East-Southeast (ESE), and Japanese Tsukuba (TSKB) in North American plate deforms to South-Southwest (SSW). Finally, the Korean Peninsula is approaching the Japanese Island and the rate of horizontal crustal deformation between the Suwon and the Tsukuba is about 31.98 mm per year in the moving direction of N85.9oW (274.1o) for the past three years.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.5
• /
• pp.401-406
• /
• 2020

Continuously monitoring of Horizontal and Vertical movements in vulnerable areas due to earthquakes and volcanic activities is vital. These geohazard activities are the result of a slow deformation rate at the tectonic plate boundaries. The recent development of GPS (Global Positioning System) technology has made it possible to attain a millimeter level changes in the Earth's crust. This study used continuously observed GPS data at the flank of Ol Doinyo Lengai volcanic Mountain to determine crustal motion caused by impinging volcano from mantle convention. We analyzed 8 GPS observed from June 2016 to Dec 2019 using a well-documented Global Kalman Filter GAMIT/GLOBK software. The resulting velocity from GAMIT/GLOBK analysis was then used to compute the relative motion of our study area with respect to Nubia plate. Our analysis discovered a minor motion of less than 5mm/year in both horizontal and vertical components.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.171-178
• /
• 2017

In this paper, in order to verify the performance of a localization algorithm using GPS as an auxiliary sensor, the algorithm was applied to a hovering-type autonomous underwater vehicle (AUV) to perform a field test. The applied algorithm is an algorithm to improve the accumulated positional error of dead reckoning using doppler velocity logger(DVL) and tilt-compensated compass module (TCM) mounted on the AUV. GPS when surfaced helps the algorithm to estimate the position and the heading bias error of TCM for geodetic north, which makes it possible to perform dead reckoning on north-east-down (NED) coordinates. As a result of field test performing heading control, it was judged that the algorithm could improve the positional error, enhance the operational capability of AUV and contribute to the research of underwater navigation depending on a magnetic compass.