• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.167-176
• /
• 2022

We designed a borehole deviation survey tool applicable for steel-cased holes, K-DEV, and developed a prototype for a depth of 500 m aiming to development of own equipment required to secure deep subsurface characterization technologies. K-DEV is equipped with sensors that provide digital output with verified high performance; moreover, it is also compatible with logging winch systems used in Korea. The K-DEV prototype has a nonmagnetic stainless steel housing with an outer diameter of 48.3 mm, which has been tested in the laboratory for water resistance up to 20 MPa and for durability by running into a 1-km deep borehole. We confirmed the operational stability and data repeatability of the prototype by constantly logging up and down to the depth of 600 m. A high-precision micro-electro-mechanical system (MEMS) gyroscope was used for the K-DEV prototype as the gyro sensor, which is crucial for azimuth determination in cased holes. Additionally, we devised an accurate trajectory survey algorithm by employing Unscented Kalman filtering and data fusion for optimization. The borehole test with K-DEV and a commercial logging tool produced sufficiently similar results. Furthermore, the issue of error accumulation due to drift over time of the MEMS gyro was successfully overcome by compensating with stationary measurements for the same attitude at the wellhead before and after logging, as demonstrated by the nearly identical result to the open hole. We believe that the methodology of K-DEV development and operational stability, as well as the data reliability of the prototype, were confirmed through these test applications.

• Maritime Security
• /
• v.4 no.1
• /
• pp.1-56
• /
• 2022

Why has India become a key actor in the maritime-configured Indo-Pacific region? There are some external factors, but for India, its geo-strategic frontier encompassing its geopolitical and maritime interests is expanding rapidly beyond its territorial space across both the Indian and Pacific oceans amidst an increasingly arduous geopolitical and security environment. India must, therefore, acquire the ability to influence events within this strategic arena using all facets of national power, including maritime-military power. Lately, therefore, New Delhi has invested much intellectual capital to review its maritime-security strategy. India's new strategy is premised on the concept of holistic security involving the 'softer' aspects of maritime-security, and a rekindling of maritime consciousness in India, a nation that has traditionally been beset by 'sea-blindness'. The strategy adopts a region-wide, inclusive, and a more proactive approach than hitherto, as is evident in its title 'Ensuring Secure Seas: Indian Maritime Security Strategy'. While it deals with the growing concern of new non-traditional threats in the Indian littoral and the need for military deterrence and preparedness, it also addresses the imperatives for India to seek a favorable and rules-based benign environment in its immediate and extended maritime periphery, including through multi-vectored strategic partnerships dictated by its enduring principle of strategic autonomy. For a more profound and comprehensive understanding of India's maritime-security strategy, this paper examines the key unstated and implicit factors that underpin the strategy. These include India's historical and cultural evolution as a nation; its strategic geography; its geopolitical and security perceptions; and the political directions to its security forces. The paper deals specifically with India's response to maritime threats ranging from natural disasters, crime and state-sponsored terrorism to those posed by Pakistan and China, as well as the Indian Navy's envisaged security role East of the Malacca Straits. It also analyzes the aspects of organizational restructuring and force planning of India's maritime-security forces.

• Economic and Environmental Geology
• /
• v.40 no.4
• /
• pp.445-459
• /
• 2007

Superconducting Gravimeter(SG) was installed and has been successfully operated at MunGyung, Kyungsang province in Korea in March 2005. It was registered as the 21st observatory of the Global Geodynamics Project. Since SG can precisely measure the gravity variations below the 1mHz frequency band, it has the outstanding capability to sense and resolve many different periodic gravity components from each other. From the raw data collected between 18 March 2005 and 21 February 2006 diurnal and semi-diurnal tidal band's residual gravity components were analyzed. During this process, the instrumental noises, air pressure, and ground water corrections were carried out. Values of $-3.18nm/s^2/hPa\;and\;17nm/s^2/m$ were used respectively in the air pressure and groundwater corrections. Hartmann-Wenzel and Whar-Dehant Earth tide models were adopted to compute the residual gravity for Q1, O1, P1, K1, M2, N2, S2, K2 tidal bands. For the ocean loading correction, SCW80, FES952, and FES02 models were used and compared. As a result, FES02 ocean loading model has shown the best match for the data processing at MunGyung SG MunGyung SG gravity was compared with GRACE satellite gravity. The correlation coefficient between the two gravity after groundwater correction was 0.628, which is higher than before ground water correction. To evaluate sensitivity at MunGyung SG gravity statition, the gravity data measured during 2005 Indodesian earthquake was compared with STS-2 broad band seismometer data. The result clearly revealed that the SG could recorded the same period of earthquake with seismometer event and a few after-shock events those were detected by seismometer.

• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.95-104
• /
• 2013

In this study, a novel method is proposed for retrieving relative surface temperature from single-channel middle infra-red (MIR, 3-5 ${\mu}m$) remotely sensed data. In order to retrieve absolute temperature from MIR data, it is necessary to accommodate at least atmospheric effects, surface emissivity and reflected solar radiance. Instead of retrieving kinematic temperature of each target, we propose an alternative to retrieve the relative temperature between two targets. The core idea is to minimize atmospheric effects by assuming that the differential at-sensor radiance between two targets experiences the same atmospheric effects. To reduce effective simplify atmospheric parameters, each atmospheric parameter was examined by MODTRAN and MIR emissivity derived from ASTER spectral libraries. Simulation results provided a required accuracy of 2 K for materials with a temperature of 300 K within 0.1 emissivity errors. The algorithm was tested using MODIS band 23 MIR day time images for validation. The accuracy of retrieved relative temperature was $0.485{\pm}1.552$ K. The results demonstrated that the proposed algorithm was able to produce relative temperature with a required accuracy from only single-channel radiance data. However, this method has limitations when applied to materials having very low temperatures using day time MIR images.

• Journal of the Korean association of regional geographers
• /
• v.11 no.1
• /
• pp.19-28
• /
• 2005

Although Dokdo, small and dependent islands of Ulleung County, can be considered critical in terms of both geo-politics and physical geography, it is clear that Korean geographers have been too silent tn study Dokdo. In the author's view, such tendency is partly due to difficulties in access to Dokdo. In this sense this study would be meaningful for inquiring into the regional geomorphology of Dokdo regardless of only three-day field work. The major findings of the study are as follows. Firstly, the geology of Dokdo is composed of 8 rock units. Secondly, in a slope analysis of Dokdo volcano using GIS tool, steep slopes over $26^{\circ}$ account for 79.1% of whole slopes and even free faces, defined as slopes over $40^{\circ}$, account for 65.4%. Thirdly, the main landforms of Dokdo constitute volcanic landform, coastal landform and the others, such as talus, dyke, tafoni and erosional hollow. Fourthly, it turns out that advanced landform classification map of Dokdo can be designed by taking an approach tn regional geomorphology. Finally, based on a detailed review of the latest geological literature, I argue that part of landforms of East Dokdo(dongdo) is closer tn an erosional hollow than a small crater.

• Journal of Environmental Science International
• /
• v.18 no.3
• /
• pp.315-323
• /
• 2009

Hydraulic gradient of the landfill soils is estimated by Devlin (2003) method, and its variation characteristics from rainfall and permeability of the aquifer material are analyzed. The study site of 18 m $\times$ 12 m is located in front of the Environment Research Center at the Pukyong National University, and core logging, slug/bail test and groundwater monitoring was performed. The sluglbail tests were performed in 9 wells (except BH9 well), and drawdown data with elapsed time for bail tests were analyzed using Bouwer-Rice and Hvorslev methods. The average hydraulic conductivity estimated in each of the test wells was ranged $1.991{\times}10^{-7}{\sim}4.714{\times}10^{-6}m/sec$, and the average hydraulic conductivity in the study site was estimated $2.376{\times}10^{-6}m/sec$ for arithmetic average, $1.655{\times}10^{-6}m/sec$ for geometric average and $9.366{\times}10^{-7}m/sec$ for harmonic average. The permeability of landfill soils was higher at the east side of the study site than at the west side. Groundwater level in 10 wells was monitored 44 times from October 2 to November 7, 2007. The groundwater level was ranged 1.187$\sim$1.610 m, and the average groundwater level range in each of the well showed 1.256$\sim$1.407 m. The groundwater level was higher at the east side than at the west side of the study site, and this distribution is identify to it of hydraulic conductivity. The hydraulie gradient and the major flow direction for 10 wells were estimated 0.0072$\sim$0.0093 and $81.7618{\sim}88.0836^{\circ}$, respectively. Also, the hydraulic gradient and the major flow direction for 9 wells were estimated 0.0102$\sim$0.0124 and $84.6822{\sim}89.1174^{\circ}$, respectively. The hydraulic gradient of the study site increased from rainfall (83.5 mm) on October 7, causing by that the groundwater level of the site with high permeability was higher. The hydraulic gradient estimated on and after October 16 was stable, due to almost no rainfall. Thus, it was confirmed that the variation of the hydraulic gradient in the landfill soils was controlled by the rainfall.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.53-62
• /
• 2016

In recent years, UAV Photogrammetry based on an ultra-light UAS(Unmanned Aerial System) installed with a low-cost compact navigation device and a camera has attracted great attention through fast and accurate acquirement of geo-spatial data. In particular, UAV Photogrammetry do gradually replace the traditional aerial photogrammetry because it is able to produce DEMs(Digital Elevation Models) and Orthophotos rapidly owing to large amounts of high resolution image collection by a low-cost camera and image processing software combined with computer vision technique. With these advantages, UAV-Photogrammetry has therefore been applying to a large scale mapping and cadastral surveying that require accurate position information. This paper presents experimental results of an accuracy performance test with images of 4cm GSD from a fixed wing UAS to demarcate parcel boundaries in agricultural area. Consequently, the accuracy of boundary point extracted from UAS orthoimage has shown less than 8cm compared with that of terrestrial cadastral surveying. This means that UAV images satisfy the tolerance limit of distance error in cadastral surveying for the scale of 1: 500. And also, the area deviation is negligible small, about 0.2%(3.3m²), against true area of 1,969m² by cadastral surveying. UAV-Photogrammetry is therefore as a promising technology to demarcate parcel boundaries.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.148-157
• /
• 2012

Recently, people are getting more interested in green energy resource and environment friendly energy resource due to the lack of energy and global warming. This study produced a solar energy resource map using LiDAR(Light Detection And Ranging) data to check if it is utilized for spatial information technology and solar energy sectors that people pay more attentions to as new recycling energy. This study assigned Ulleungdo(Island) located in Gyeongsangbuk-do as a target area. This study created the contour line with 1 meter by newly photographing LiDAR and data processing. And using this contour line, this study built DEM(Digital Elevation Model) data with 1 meter. The incidence range depending on the altitude and azimuth of sun using DEM data is used to evaluate solar energy resource. This is expected to suggest an accurate method to evaluate more reliable and more precise information of new recycling energy resource by producing solar energy resource map based on accurate and precise spatial resolution data with 1 meter level.

• The Journal of Engineering Geology
• /
• v.29 no.1
• /
• pp.23-35
• /
• 2019

Landslides occur due to heavy rainfall in the summer season. Some of water may infiltrate into the ground; it causes a high saturation condition capable of causing a landslide. Soil properties are crucial in estimating slope stability and debris flow occurrence. The main study areas are Gwanaksan, Suraksan and Bukhansan (Mountain) in Seoul. A total of 44 soil samples were taken from the study area; and a series of geotechnical tests were performed. Physical and mechanical properties were obtained and compared based on region. As a result, among well-graded soils, they are classified as a clayey sand. Coarse-grained and fine-grained contents are approximately 95% and 5%, respectively, with very low amount of clay content. Density, liquid limit and dry unit weight are ranged in $2.62{\sim}2.67g/cm^3$, 27.93~38.15% and $1.092{\sim}1.814g/cm^3$. Cohesion and internal friction angle are 4 kPa and $35^{\circ}$ regardless of mountain area. Coefficient of permeability is varied between $3.07{\times}10^{-3}{\sim}4.61{\times}10^{-2}cm/sec$; it means that it results in great seepage. Permeability is inversely proportional to the uniformity coefficient and is proportional to the effective particle size. In the formal case, there was a difference by mountain area, while in the latter, the tendency was almost similar.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.6
• /
• pp.121-132
• /
• 2021

Green facade has a significant impact on building's energy performance by controlling the absorption of solar radiation and improving outdoor thermal comfort through shading and evapotranspiration. In particular, since high-density building does not enough green space, green facade, and rooftop greening using artificial ground plants are highly utilized. However, the level of cooling effect according to plant traits and irrigation control is different. Therefore, in this study, the cooling effect analyzed for a total of 4 cases by controlling the irrigation condition based on hedera and spurge. Although hedera under sufficient water had the highest cooling effect(-2℃~-4℃), had the lowest cooling effect under non-irrigation(+1.1℃~+4.4℃). In addition, hedera under sufficient water had cooling effect than hedera under non-irrigation(-1℃~-8.1℃) and in the case of spurge, it had cooling effect(-0.3℃~-7.8℃) more than non-irrigation. As a result of measuring the amount of transpiration according to the light intensity (PAR) and carbon dioxide concentration conditions, transpiration of hedera was higher than the spurge (respectively 0.63204mmolm^-2s^-1, 0.674367mmolm^-2s^-1). The difference in the cooling effect of the green facade under irrigation condition was significant. But the potential cooling effect of green facade according to plants species was different. Therefore, in order to maximize and continuously provide the cooling effect of green facade in urban areas, it is necessary to consider the characteristics of plants and the control of water supply through the irrigation system.