• Journal of Forest and Environmental Science
• /
• 제38권1호
• /
• pp.12-20
• /
• 2022

Pongamia (Pongamia pinnata L.) as a source of non-edible oil, is potential tree species for biodiesel production. For several reasons, both technical and economical, the potential of P. pinnata is far from being realized. The exploitation of genetic diversity for crop improvement has been the major driving force for the exploration and ex situ/in situ conservation of plant genetic resources. However, P. pinnata improvement for high oil and seed production is not achieved because of unsystematic way of tree improvement. Performance of P. pinnata planted by Karnataka Forest Department was assessed based on yield potential by collecting 157 clones out of 264 clones established by Karnataka Forest Department research wing under different research circles/ranges. It was evident that the all the seed and pod traits were significantly different. Further, selection of superior germplasm based on oil and pod/seed parameters was achieved by application of Mahalanobis statistics and Tocher's technique. On the basis of D² values for all possible 253 pairs of populations the 157 genotypes were grouped into 28 clusters. The clustering pattern showed that geographical diversity is not necessarily related to genetic diversity. Cluster means indicated a wide range of variation for all the pod and seed traits. The best cluster having total oil content of more than 34.9% with 100 seed weight of above 125 g viz. Cluster I, II, III, IX, XV, XIX, XXI, XXIII, XXVI and XXVII were selected for clonal propagation.

• Journal of Animal Science and Technology
• /
• 제48권6호
• /
• pp.759-766
• /
• 2006

본 연구는 농협중앙회 가축개량사업소가 보유하고 있는 1998년부터 2005년까지 실시한 한우 당대검정 대상우 2,532두의 자료와 1996년부터 2002년까지 실시한 한우 후대검정 대상우 1,819두의 자료를 이용하여 당대 및 후대의 형질을 다형질 개체모형을 이용하여 유전모수를 추정하였다. 적합한 통계분석모형을 찾기 위하여 각 형질별로 회귀분석을 통한 변수선택방법으로 고정효과와 공변량을 결정하고, MTDFREML 패키지를 이용하여 유전모수를 추정하였다. 분석형질은 등지방두께, 도체중, 도체율, 등심단면적, 근내지방도 및 12개월령 체중으로, 이들의 유전력은 각각 0.51, 0.32, 0.27, 0.33, 0.50 및 0.26로 나타났다. 한편 유전평가에서 제외되었던 등지방두께 및 도체율의 유전력이 각각 0.51 및 0.27으로 추정되어 이에 대한 선발이 가능할 것으로 나타났다. 특히 등지방두께는 현 육량지수 산출식에서 그 영향력이 매우 크므로 한우보증씨수소 선발지수에 포함하는 방안을 고려할 필요가 있을 것으로 사료된다. 도체형질간의 유전상관은 등지방두께와 등심단면적을 제외하고 모두 양의 상관을 나타났다. 그러나, 12개월령 보정체중과 도체율 및 근내지방도의 유전상관은 각각 0.09 및 0.27으로 나타나 현행 한우개량체계에서 처럼 당대검정우를 12개월령 체중으로 선발할 경우 등심단면적과 근내지방도가 우수한 개체가 탈락할 가능성이 있는 것으로 나타나 이의 보완을 위한 혈통지수의 활용방안이나 초음파단층촬영기술의 이용방법에 대한 추가연구가 필요한 것으로 사료된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권4호
• /
• pp.623-628
• /
• 1992

Records on weaning (3803) and yearling weight (2990) of beef cattle (Bibos banteng) from the Bali Cattle Improvement Project were examined. A mixed model analysis involving all main non-genetic effects (village, year of birth, season of birth, age of dam, sex of calf, all significant interactions and age at weighing as a covariate) as fixed effects and sire nested within village as a random effect was undertaken. Variance components were estimated by Henderson's Method III. Paternal half-sib components of variance and covariance were used to estimate heritabilities of weaning and yearling weights, as well as their genetic and phenotypic correlations. Heritability estimates ($\pm$ standard error) obtained by Henderson's Method III for weaning and yearling weights were $.11{\pm}.03$ and $.13{\pm}.04$, respectively while the phenotypic and genetic correlations were estimated as .32 and $.64{\pm}.10$, respectively. The parameters estimated in this study were at the lower end of the range of reported values from various breeds. It is concluded that further information should be gathered to assist in estimating genetic parameters for other economic traits of Bali beef cattle and to provide more accurate estimates for weaning and yearling weights. These parameters should then be used to formulate a selection program to enable the genetic improvement of Bali Beef cattle.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권5호
• /
• pp.687-692
• /
• 1998

Test pattern generation is one of most difficult problems encountered in automating the design of logic circuits. The goal is to obtain the highest fault coverage with the minimum number of test patterns for a given circuit and fault set. although there have been many deterministic algorithms and heuristics the problem is still highly complex and time-consuming. Therefore new approach-es are needed to augment the existing techniques. This paper considers the problem of test pattern improvement for combinational circuits as a restricted subproblem of the test pattern generation. The problem is to maximize the fault coverage with a fixed number of test patterns for a given cir-cuit and fault set. We propose a new approach by use of a genetic algorithm. In this approach the genetic algorithm evolves test patterns to improve their fault coverage. A fault simulation is used to compute the fault coverage of the test patterns Experimental results show that the genetic algorithm based approach can achieve higher fault coverages than traditional techniques for most combinational circuits. Another advantage of the approach is that the genetic algorithm needs no detailed knowledge of faulty circuits under test.

• 경영과학
• /
• 제20권1호
• /
• pp.51-64
• /
• 2003

The JSSP (Job Shop Scheduling Problem) Is one of the most general and difficult of all traditional scheduling problems. The goal of this research is to develop an efficient scheduling method based on genetic algorithm to address JSSP. we design scheduling method based on SGA (Single Genetic Algorithm) and PGA (Parallel Genetic Algorithm). In the scheduling method, the representation, which encodes the job number, is made to be always feasible, initial population is generated through integrating representation and G&T algorithm, the new genetic operators and selection method are designed to better transmit the temporal relationships in the chromosome, and island model PGA are proposed. The scheduling method based on genetic algorithm are tested on five standard benchmark JSSPs. The results were compared with other proposed approaches. Compared to traditional genetic algorithm, the proposed approach yields significant improvement at a solution. The superior results indicate the successful Incorporation of generating method of initial population into the genetic operators.

• 한국작물학회지
• /
• 제50권2호
• /
• pp.91-96
• /
• 2005

Proper choice of source populations contributes to the ultimate success of selection for genetic improvement. The source population should possess the most desirable alleles at as many loci as possible for intra population improvement. Such desirable alleles can be intensified by introgression of exotic germ plasm into locally adapted ones through hybridization followed by selection. The objectives of this study were to determine the mean performance, genetic variability $({\sigma}^2G)$ and heritability of fresh ear yield and other important traits within two sweet corn source populations, $BC1-10{\times}Syn-II$ and BC2-10. One hundred selfed progenies from each of the two source populations were evaluated in a $10\times10$ lattice design, at the Institute of Bioscience (IBS) Farm, University of Putra Malaysia (UPM) following the recommended cultural practices. Significant differences among selfed progenies within $BC1-10{\times}Syn-II$ were observed for all traits, while differences among selfed progenies within BC2-10 were noted for fresh ear yield, ear length, ear diameter, number of kernels per row, ear height, days to tasseling and days to silking. Progenies developed from $BC1-10{\times}Syn-II$ population had higher estimates of ${\sigma}^2G$ than did progenies from BC2-10 population for number of kernel rows per ear, total soluble solids, plant height, days to tasseling and days to silking, showing that selection to improve these traits would be more effective in selfed progenies of $BC1-10{\times}Syn-II$ than that in BC2-10. On the other hand, progenies developed from BC2-10 population had higher estimates of ${\sigma}^2G$ for ear length, ear diameter and ear height, indicating that progenies from this population would have better genetic gain than $BC1-10{\times}Syn-II$. Comparable estimates of genetic variance were found for fresh ear yield, and number of kernels per row, indicating that genetic improvement of the two source populations is expected to produce similar genetic gains for these two traits. Therefore, selfed progenies developed from both source populations could be used to improve the two populations for various traits and thereby develop superior genotypes for immediate use in the production system.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권7호
• /
• pp.930-938
• /
• 2019

Objective: Estimate genetic parameters, the rate of inbreeding, and the effect of inbreeding on growth and egg production traits of a Thai native chicken breed Lueng Hang Kao Kabinburi housed under intensive management under a tropical climate. Methods: Genetic parameters were estimated for weight measured at four weekly intervals from body weight at day 1 (BW1D) to body weight at 24 weeks (BW24) of age, as well as weight at first egg, age at first egg (AFE), egg weight at first egg, and total number of eggs (EN) produced during the first 17 weeks of lay using restricted maximum likelihood. Inbreeding depression was estimated using a linear regression of individual phenotype on inbreeding coefficient. Results: Direct additive genetic effect was significant for all traits. Maternal genetic effect and permanent environmental hen effects were significant for all early growth traits, expect for BW24. For BW24, maternal genetic effect was also significant. Permanent environmental hen effect was significant for AFE. Direct heritabilities ranged from 0.10 to 0.47 for growth traits and ranged from 0.15 to 0.16 for egg production traits. Early growth traits had high genetic correlations between them. The EN was lowly negatively correlated with other traits. The average rate of inbreeding for the population was 0.09% per year. Overall, the inbreeding had no effect on body weight traits, except for BW1D. An increase in inbreeding coefficient by 1% reduced BWID by 0.09 g (0.29% of the mean). Conclusion: Improvement in body weight gain can be achieved by selecting for early growth traits. Selection for higher body weight traits is expected to increase the weight of first egg. Due to low but unfavorable correlations with body weight traits, selection on EN needs to be combined with other traits via multi-trait index selection to improve body weight and EN simultaneously.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권1호
• /
• pp.19-25
• /
• 2018

Objective: In practical breeding, selection is often performed by ignoring the accuracy of evaluations and applying economic weights directly to the selection index coefficients of genetically standardized traits. The denominator of the standardized component trait of estimated genetic evaluations in practical selection varies with its reliability. Whereas theoretical methods for calculating the selection index coefficients of genetically standardized traits account for this variation, practical selection ignores reliability and assumes that it is equal to unity for each trait. The purpose of this study was to clarify the effects of ignoring the accuracy of the standardized component trait in selection criteria on selection responses and economic weights in retrospect. Methods: Theoretical methods were presented accounting for reliability of estimated genetic evaluations for the selection index composed of genetically standardized traits. Results: Selection responses and economic weights in retrospect resulting from practical selection were greater than those resulting from theoretical selection accounting for reliability when the accuracy of the estimated breeding value (EBV) or genomically enhanced breeding value (GEBV) was lower than those of the other traits in the index, but the opposite occurred when the accuracy of the EBV or GEBV was greater than those of the other traits. This trend was more conspicuous for traits with low economic weights than for those with high weights. Conclusion: Failure of the practical index to account for reliability yielded economic weights in retrospect that differed from those obtained with the theoretical index. Our results indicated that practical indices that ignore reliability delay genetic improvement. Therefore, selection practices need to account for reliability, especially when the reliabilities of the traits included in the index vary widely.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권7호
• /
• pp.915-921
• /
• 2005

Genetic variation at 25 microsatellite loci, population structure, and genetic bottleneck hypothesis were examined for Ankleshwar poultry population found in Gujrat, India. The estimates of genetic variability such as effective number of alleles and gene diversities revealed substantial genetic variation frequently displayed by microsatellite markers. The average polymorphism across the studied loci and the expected gene diversity in the population were 6.44 and 0.670${\pm}$0.144, respectively. The population was observed to be significantly differentiated into different groups, and showed fairly high level of inbreeding (f = 0.240${\pm}$0.052) and global heterozygote deficit. The bottleneck analysis indicated the absence of genetic bottleneck in the past. The study revealed that the Ankleshwar poultry breed needs appropriate genetic management for its conservation and improvement. The information generated in this study may further be utilized for studying differentiation and relationships among different Indian poultry breeds.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권5호
• /
• pp.611-616
• /
• 2006

Genetic parameters for performance traits on 409 bulls and growth and carcass traits on 591 of their steer progeny were estimated in Japanese Black cattle with Gibbs sampling. Traits of bulls included body weight at the start (BWS) and finish (BWF) of test, daily gain (DG), concentrate, roughage and TDN intake, and TDN conversion ratio. Progeny traits were BWS, BWF, DG, rib eye area, marbling score (MSR), dressing percentage and subcutaneous fat thickness (SFT). In bulls, heritabilities were high for BWS (0.50) and BWF (0.63) and moderate for concentrate (0.48) and TDN intake (0.45), while in progeny, the heritability for all the studied traits was moderate to high (ranging from 0.30 to 0.73), highlighting the potential for genetic improvement of these traits. Genetic correlations between TDN intake and growth traits (BWS, BWF and DG) in bulls were highly positive (ranging from 0.77 to 0.94). The weak but negative genetic correlation (-0.20) between MSR and SFT in progeny indicated that improvement of beef marbling without increasing subcutaneous fat deposition could be possible. The estimated genetic correlations of roughage intake of bulls with body weights (BWS and BWF) and MSR of their progeny were moderate (ranging from 0.35 to 0.52). On the basis of the selection for bulls, growth traits and TDN intake correlated positively with SFT (ranging from 0.43 to 0.53) of their progeny, suggesting the necessity of controlling the increase of SFT in selection programs.