• 융합신호처리학회논문지
• /
• 제10권1호
• /
• pp.93-99
• /
• 2009

퍼지제어, 신경망, 유전알고리즘은 시스템의 지능을 좀 더 높게 만들기 위한 알고리즘들이다. 본 논문은 원하는 응답을 얻기 위해 유전알고리즘을 사용해서 퍼지제어기를 최적화시켰다. 또한, 보상된 퍼지제어기는 두 개의 제어규칙을 갖는다. 하나의 제어규칙은 오버슛과 과도응답영역에서 일어나는 상승시간을 감소시키기 위해 사용하고 다른 하나는 정상상태오차를 줄이고 수렴영역에서의 수렴을 빠르게 가져가기 위해 사용된다. 유전알고리즘 제어기는 두 개의 퍼지 룰 베이스의 최적한 교체시기를 찾기 위해 사용하며 퍼지-유전알고리즘 제어기는 재생산, 교배와 변이의 과정을 갖는다. 그리고 유압서보 모터 제어시스템에 적용하여 제안한 알고리즘을 실험하였다. 실험 결과 보상된 FUZZY-GA제어기가 두 개의 룰 베이스를 갖는 퍼지제어 기술에 비해 좋은 제어성능을 가짐을 관찰하였다.

• Journal of Electrical Engineering and Technology
• /
• 제4권2호
• /
• pp.175-184
• /
• 2009

In this paper, a method for optimal measurement placement in the problem of static harmonic state estimation in power systems is proposed. At first, for achieving to a suitable method by considering the precision factor of the estimation, a procedure based on Genetic Algorithm (GA) for optimal placement is suggested. Optimal placement by regarding the precision factor has an evident solution, and the proposed method is successful in achieving the mentioned solution. But, the previous applied method, which is called the Sequential Elimination (SE) algorithm, can not achieve to the evident solution of the mentioned problem. Finally, considering both precision and economic factors together in solving the optimal placement problem, a practical method based on GA is proposed. The simulation results are shown an improvement in the precision of the estimation by using the proposed method.

• 산업경영시스템학회지
• /
• 제26권2호
• /
• pp.1-8
• /
• 2003

The operation and management of a plant require proper accounting for the constraints coming from reliability requirements as well as from budget and resource considerations. Most of the mathematical methods to decide the inspection time interval for plant maintenance by reliability theory are too complicated to be solved. Moreover, the mathematical and theoretical models are not usually cases in the practical applications. In order to overcome these problems, we propose a new the decision-making method of optimal inspection interval to minimize the maintenance cost by reliability theory and genetic algorithm (GA). The most merit of the proposed method is to decide the inspection interval for a plant machine of which failure rate $\lambda$(t) conforms to any probability distribution. Therefore, this method is more practical. The efficiency of the proposed method is verified by comparing the results obtained by GA-based method with the inspection model haying regular time interval.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.174-176
• /
• 1997

This paper proposes a unit commitment scheduling method based on hybrid genetic algorithm(GA). When the systems are scaled up, conventional genetic algorithms suffer from computational time limitations because of the growth of the search space. So greatly reduce the search space of the GA and to efficiently deal with the constraints of the problem, priority list unit ordering scheme are incorporated as the initial solution and the minimum up and down time constraints of the units are included. The violations of other constraints are handled by integrating penalty factors. To show the effectiveness of the proposed method. test results for system of 10 units is compared with results obtained using other methods.

• Journal of Electrical Engineering and Technology
• /
• 제5권4호
• /
• pp.653-665
• /
• 2010

In this study, we introduce a neurofuzzy approach to the design of fuzzy controllers. The development process exploits key technologies of Computational Intelligence (CI), namely, genetic algorithms (GA) and neurofuzzy networks. The crux of the design methodology deals with the selection and determination of optimal values of the scaling factors of fuzzy controllers, which are essential to the entire optimization process. First, the tuning of the scaling factors of the fuzzy controller is carried out. Next, we form a nonlinear mapping for the scaling factors, which are realized by GA-based neurofuzzy networks by using a fuzzy set or fuzzy relation. The proposed approach is applied to control nonlinear systems like the inverted pendulum. Results of comprehensive numerical studies are presented through a detailed comparative analysis.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.527-529
• /
• 2015

The control delays at signal intersections have proved the source of numerous vehicular and environmental complications. Control delays both directly and indirectly hinder time- and cost-effective driving by extending the duration of time spent on the road and exhausting excessive amounts of fuel. They furthermore cause traffic congestion, thereby raising overall emission levels. It is therefore imperative to reduce control delays in order to achieve time and fuel economy and reduce vehicle-related pollution. The following study accordingly uses genetic algorithms to optimize traffic signals in congested environments.

• Structural Engineering and Mechanics
• /
• 제14권6호
• /
• pp.625-647
• /
• 2002

Parallel execution of computational mechanics codes requires efficient mesh-partitioning techniques. These mesh-partitioning techniques divide the mesh into specified number of submeshes of approximately the same size and at the same time, minimise the interface nodes of the submeshes. This paper describes a new mesh partitioning technique, employing Genetic Algorithms. The proposed algorithm operates on the deduced graph (dual or nodal graph) of the given finite element mesh rather than directly on the mesh itself. The algorithm works by first constructing a coarse graph approximation using an automatic graph coarsening method. The coarse graph is partitioned and the results are interpolated onto the original graph to initialise an optimisation of the graph partition problem. In practice, hierarchy of (usually more than two) graphs are used to obtain the final graph partition. The proposed partitioning algorithm is applied to graphs derived from unstructured finite element meshes describing practical engineering problems and also several example graphs related to finite element meshes given in the literature. The test results indicate that the proposed GA based graph partitioning algorithm generates high quality partitions and are superior to spectral and multilevel graph partitioning algorithms.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.233-236
• /
• 2002

An efficient method was developed in this study to obtain optimal stacking sequences, thicknesses, and minimum weights of stiffened laminated composite shells under combined loading conditions and stiffener layouts using genetic algorithms (GAs) and finite element analyses. Among many parameters in designing composite laminates determining a optimal stacking sequence that may be formulated as an integer programming problem is a primary concern. Of many optimization algorithms, GAs are powerful methodology for the problem with discrete variables. In this paper the optimal stacking sequence was determined, which gives the maximum critical buckling load factor and the minimum weight as well. To solve this problem, both the finite element analysis by ABAQUS and the GA-based optimization procedure have been implemented together with an interface code. Throughout many parametric studies using this analysis tool, the influences of stiffener sizes and three different types of stiffener layouts on the stacking sequence changes were throughly investigated subjected to various combined loading conditions.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.404-408
• /
• 2001

This paper deals with speed control of induction motors with a gain tuning based on simple Genetic Algorithms, which are search algorithms based on the mechanics of natual selection and genetics. Based on the designed control system structure, the indirect vector control system of induction motors is simulated. The simulation results show that the system has a strong robust to the parameter variation and is insensitive to the load disturbance. Thus, the proposed PI controller based on genetic algorithms is superior to manually tuned classical PI controller in improving the speed control performance of induction motors.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권1호
• /
• pp.59-64
• /
• 2002

In the sender-initiated load balancing algorithms, the sender continues to send an unnecessary request message fur load transfer until a receiver is found while the system load is heavy. Meanwhile, in the receiver-initiated load balancing algorithms, the receiver continues to send an unnecessary request message for load acquisition until a sender is found while the system load is light. These unnecessary request messages result in inefficient communications, low CPU utilization, and low system throughput in distributed systems. To solve these problems, in this paper, we propose a genetic algorithm based approach fur improved sender-initiated and receiver-initiated load balancing. The proposed algorithm is used for new adaptive load balancing approach. Compared with the conventional sender-initiated and receiver-initiated load balancing algorithms, the proposed algorithm decreases the response time and increases the acceptance rate.