• 한국항공우주학회지
• /
• 제48권6호
• /
• pp.443-453
• /
• 2020

대표적인 기동 헬리콥터인 UH-60A의 기체 진동응답을 감소시키고자 능동 진동 제어 시스템(Active Vibration Control System, AVCS)을 이용한 시뮬레이션 연구를 수행하였다. 로터 진동 하중, 기체 구조 동역학 모델링, 진동응답 해석 및 진동 제어 시뮬레이션 연구를 수행하기 위하여 DYMORE II, NDARC, MSC.NASTRAN 및 MATLAB Simulink 등의 다양한 해석, 설계 및 제어 프로그램들을 함께 사용하였다. 5개의 CRFG와 7개의 가속도계로 이루어진 Multi Input Multi Output(MIMO) 모델을 AVCS 시뮬레이션 연구에 이용하였다. 본 시뮬레이션 연구를 통하여 진동이 극심한 158knots의 비행속도에서 UH-60A의 주요 위치(조종석, 로터와 기체의 접합부, 중앙 승객실 및 후방 승객실) 위치에서 AVCS의 사용으로 인하여 4/rev 기체 진동응답이 25.14~96.05%만큼 감소될 수 있었다.

• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1757-1763
• /
• 2010

플라이휠 에너지 저장 장치는 잉여 전기를 회전관성을 통해 운동 에너지로 저장하는 장치로, 회전의 중심이 되는 축과 외부의 플라이휠로 구성이 된다. 수치해석을 위한 일반적 프로그램들은 3차원의 모델을 통하여 구조해석 및 주파수 응답 등의 해석을 수행하게 된다. 허나 상용 프로그램을 이용한 동역학적 해석의 응용은 매우 어려운 실정이며, 사용자가 그 방법을 익히는 것 또한 쉽지 않다. 이러한 문제들을 보완하고자 동역학적 해석을 위한 프로그램을 2차원의 모델을 사용하여 구축하였다. 본 논문에서 제시한 모델링은 회전체를 2차원으로 표현함으로써 3차원에 비해 시스템의 표현을 보다 단순화하여 시스템의 구조를 쉽게 이해할 수 있도록 하였으며, 회전체를 서로 다른 재질의 다중 레이어로 모델이 가능하게 하였다. 또한 축계에 추가적 강성의 영향을 줄 수 있는 열박음 부분에 대하여, 그 영향 정도를 선택적으로 입력할 수 있게 하여 열박음에 대한 효과를 조정할 수 있도록 하였다. 따라서 본 논문에서 제시하는 2차원 모델을 이용한 동특성 해석 프로그램의 해석 오차를 알아보기 위해 상용 프로그램의 해석 결과와 비교하였으며, 모델링을 위한 시간과 해석 수행 시간 역시 비교하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.25-32
• /
• 2005

The aerodynamic loads at the blade hub and the drive shaft for 1MW horizontal axis wind turbine are calculated numerically. The geometric shape of the blade such as chord length and twist angle can be obtained fran the aerodynamic optimization procedure. Various airfoil data, that is thick airfoils at hub side and thin airfoils at tip side, are distributed along the spanwise direction of the rotor blade. Under the wind data fulfilling design load cases based on the IEC61400-1, all of the shear forces, bending moments at the hub and the low speed shaft of the drive train are obtained by using the FAST code. It shows that shear forces and bending moments have a periodic. trend. These oscillating aerodynamic loads will lead to the fatigue problem at both of the hub and drive train From the load analysis the maximum shear forces and bending moments are generated when wind turbine generator system operates in the case of the extreme speed wind condition.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.579-582
• /
• 2005

The sound measurement techniques in IEC 61400-11 are applied to field test and evaluation of noise emission from 1.5 MW wind turbine generator (WTG) at Yongdang-Lee and 650 kW WTG at Hangwon-Lee in Jeju Island. Apparent sound power level, wind speed dependence and third-octave band levels are evaluated for both of WTGs. 1.5 MW WTG at Yongdang is found to emit lower sound power than 660 kW one at Hangwon, which seems to be due to lower rotating speed of the rotor of WTG at Yongdang. Equivalent continuous sound pressure level s (ECSPL) of 650 kW WTG at Hangwon vary more widely with speed than those of 1.5 MW WTG at Yongdang. The reason for this is believed to be the fixed blade-rotating speed of WTG at Yongdang. One-third octave band analysis of the measured data show that the band components around 400-500 Hz are dominant for 1.5 MW WTG at Yongdang and those around 1K Hz are dominant for 660 kW WTG at Hangwon.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1075-1076
• /
• 2011

This paper compares performance characteristics and mechanical design specifications of outer rotor radial flux type and double-sided axial flux type permanent magnet generator for 1.5-kW class small scale wind power applications to suggest most suitable type. In order to analyze electromagnetic performances of two different type generators, this paper performs generating performance and efficiency characteristic analysis from electrical parameters obtained by using nonlinear finite element analysis using commercial software, electromagnetic losses characteristics equations and d-q characteristics equation. Considering the derived electromagnetic performance, mechanical design specifications and manufacturing cost, the best suitable model for 1.5-kW class wind power system is determined, and its experiment was performed to validate the suggested analysis method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.93-94
• /
• 2011

This paper analyzes the shaft torsion of a doubly-fed induction generator (DFIG) for a wind farm collector system fault. When a fault occurs, the active power of the DFIG cannot be transmitted to the grid and thus accelerates the rotation of both the blade and the rotor. Due to the different inertia of these, the angle of deviation fluctuates and the shaft torsion is occurred. This becomes much severe when the rotational speed of the blade exceeds a threshold, which activating the pitch control to reduce the mechanical power. The torque, which can be sixty times larger than that in the steady state, may destroy the shaft. The shaft torsion phenomena are simulated using the EMTP-RV simulator. The results indicate that when a wind farm collector system fault occurs, a severe shaft torsion is occurred due to the activation of the pitch control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전력기술부문
• /
• pp.63-65
• /
• 2007

Recently with increase consumption of electric power, the scale of the electric system becomes bigger and complex. Then, it is increasing the hardship in the operation of electric system and the continuance of stability. Especially, as the differences between demand and supply in electric power keeping low frequency oscillating attenuation from electric power have been very important in the continuance part of stability. The more control time of electricity system is getting faster with digitalization the more stability of electricity system is getting worse. As solutions of these problems, by establishing Power System Stabilizing Controller putting PSS output signal and putting damping to vibration of the rotor at generators's AVR in area where is oscillated, We are willing to contribute the electricity system by holding in generator output vibration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.865-867
• /
• 2001

Generally large synchronous rotating machines with 2 poles have more merits than the others with more than 2 poles Superconducting synchronous rotating machines also have the same tendency, but they have different structure from conventional ones because of no magnetic core inside of the rotor. As the result, design approaches of the superconducting field coils are also different, which would be classified into 2 types according to their coil shapes. The first one is race-track type and the other is saddle type Race-track type machines have almost the same structure with conventional salient pole generators which are being used as largely small scale machines with more than 2 poles. On the other hand saddle type machines correspond to conventional cylindrical generators with 2 poles used for large turbine system in power plants. In this paper several types of superconducting field coils are introduced for 2 pole superconducting machine design and then the feasibility of each type is considered. Moreover, based on the consideration. 1MVA superconducting generator(S.G.) with saddle type field coil is designed electromagnetically.

• 전기학회논문지
• /
• 제61권6호
• /
• pp.791-796
• /
• 2012

This paper presents the various analysis of the power system for operating the new SIHWA tidal power plant. In the analysis of the power system, summer load condition of 2011 is used. Especially, power flow, fault current, voltage and contingency of SIHWA tidal power plant area are analyzed by using PSS/E and there is no problem for the dynamic stability simulation. The new SIHWA tidal power plant is located in near metropolitan area where about 43% amount of the system load is consumed. Therefore, transmission losses are reduced. In addition, system marginal price can be lowered by generating the new SIHWA tidal power plant. The generation pattern of the SIHWA tidal plant is analyzed and the changes of generation are presented for various water levels by control of the rotor angle alpha and beta in water wheel generator.

• 한국소음진동공학회논문집
• /
• 제23권8호
• /
• pp.681-689
• /
• 2013

The commercial tools to simulate the non-linear dynamic characteristics of wind turbine system are various but, the tool take much time to simulate the control algorithm and require many input variables. In this paper, the procedures to derive the simplified 4-degree-of-freedom mathematical model of a 2-MW wind turbine which could be used at the initial design stage of the controller are proposed based on RISO's suggested method. In this model, the 1st tower fore-after bending motion and 1st blade flapping motion are also considered in addition to the rotor-generator rotation motion in the 2-DOF model. The effectiveness of the 4-DOF model is examined comparing with the 2-DOF model and verification of the simplified model is accomplished through modal analysis for whole wind turbine system.