• Journal of Family Resource Management and Policy Review
• /
• v.20 no.4
• /
• pp.1-17
• /
• 2016

The purpose of this study was to investigate the effect of family characteristics of the baby boomer generation on the level of their later life preparation. This study randomly sampled a birth cohort between 1955 and 1963 consisting of participants living in Seoul, South Korea with a spouse and a child/children. This study investigated a total of 455 subjects from March 2 to March 20, 2016. The study findings are summarized as follows. This study analyzed the characteristics of baby boomers' family relationships and their effects on their later life preparation. It was found that 55.4% of the subjects had at least 2 children, and 44.6% had 1 child. Concerning their children's marital status, 33.8% had married children and 66.2% had unmarried children. The level of their children's support was found at 2.82 points (standard deviation [SD] = .64), which is slightly higher than the mean value of 2.5. The spouse satisfaction among the subjects was found to be 3.59 (.79) which is higher than the mean value of 3. The general status of later life preparation was 2.70 (SD = .44), which is lower than the mean value of 3. In the sub-dimension, the level of social preparation was 2.98 points (SD = .61); the level of economic preparation was 2.60 (SD = .64); and the level of physical preparation was 2.53 (SD = .45). All the values were lower than the mean value of 3. The overall status of later life preparation of the subjects in this study was low. The physical preparation level was particularly low. To analyze the factors that affect baby boomers' later life preparation, a hierarchical regression analysis was implemented. As a result, a significant effect was found in specific factors, such as spouse satisfaction (${\beta}$ = .32, p < .001), age (${\beta}$ = .26, p < .001), number of children (${\beta}$ = -.18, p <.001), health status (${\beta}$ = .18, p < .001), gender (${\beta}$ = -.11, p < .05), household income (${\beta}$ = .10, p < .05), and children's marital status (${\beta}$ = .10, p < .05). That is, the higher the spousal satisfaction, the older the age, and the lower the number of children, the higher the levels of later life preparation. Further, a higher level of later life preparation was observed in women, those with higher household incomes, and those with married children.

• Korean journal of applied entomology
• /
• v.28 no.4
• /
• pp.237-243
• /
• 1989

These studies were conducted to investigate the development of chemical resistance in two-spotted spider mite (Tetranychus urticae Koch) through alternate selection for a given period of time with four acaricides including ethion of organophophours compound, dicofol of organo-chlorine compound, cyhexatin of organo-tin compound, and biphenthrin of synthetic pyrethroid compound; and to examine multiple-resistance among the acaricides to the selected populations. The development levels of chemical resistance in the two-spotted spider mite were greatly varied under alternate selection with the different chemical-group combination of four acaricides. Resistant levels of the ethion/dicofol-selected population at 13th-13th generation showed 49.4-fold resistance to ethion and 18.1-fold to dicofol; the ethion/cyhexatin-selected population at 9th-9th generation exhibited 28.1-fold to ethion and 5-fold to cyhexatin; the ethion/biphenthrin-selectd population at 10th-10th generation revealed 39.8-fold to ethion and 19.2-fold to biphenthrin. However, the dicofol/cyhexatin-selected population at 9th-9th generation showed 11.3-fold to dicofol and 4.9-fold to cyhexatin, and the dicofol/biphenthrin-selected population at 12th-12th generation exhibited 11.2-fold to dicofol and 9.4- fold to biphenthrin, while the cyhexatin/biphenthrin-selected population at 9th-9th generation revealed 3.7-fold to cyhexatin and 7.7-fold to biphenthrin. In case of alternate selection, the ehtion/dicofol-selected population revealed moderate multiple-resistance level to biphenthrin. The ethion/cyhexatin-selected and the ethion/biphenthrin-selected populations showed low mutiple-resistance level to biphenthrin and dicofol, respectively. However, the dicofol/cyhexatin-selected, the dicofol/biphenthrin-selected and the cyhexatin/biphenthrin-selected populations exhibited high multiple-resistance level to ethion.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.189-197
• /
• 2012

It is usual for test data generation to be performed using either high-level specifications or source codes written in high-level programming languages. In certain circumstances, however, such information is not always available. This paper presents a technique that generates test data based on executable object codes. The proposed technique makes use of a very simple function minimization technique without sophisticated object code analysis and produces test data dynamically. We have conducted a simple experiment to evaluate the effectiveness of the proposed test data generation technique with a triangle classification program to show that branch coverage can be easily achieved.

• The KIPS Transactions:PartD
• /
• v.17D no.4
• /
• pp.297-310
• /
• 2010

Recently, a new testing technique called concolic testing receives lots of attention. Concolic testing generates test data by combining concrete program execution and symbolic execution to achieve high test coverage. CREST is a representative open-source test tool implementing concolic testing. Currently, however, CREST only deals with integer type as input. This paper presents a new rule for automated test data generation in presence of inputs of pointer type. The rules effectively handles multi-level stack-directed pointers that are mainly used in C programs. In addition, we describe a tool named vCREST implementing the proposed rules together with the results of applying the tool to some C programs.

• Atmosphere
• /
• v.18 no.3
• /
• pp.207-224
• /
• 2008

Severe downslope windstorms observed at Gangneung, Korea in the springtime during the last 30 years are studied to understand their generation mechanisms. 92 severe wind cases are selected for which the maximum instantaneous wind speeds exceed two standard deviation of total mean plus ($18.7ms^{-1}$). They are categorized into the three mechanisms (hydraulic jump, partial reflection, and critical-level reflection) proposed in previous studies based on the flow condition, which is calculated using the wind and temperature profile observed at one upstream rawinsonde station, Osan. Among the three, partial reflection is found to be the most frequent mechanism for the last 30 years (1976 - 2005). To understand the role of inversion in generating severe downslope windstorms, horizontal velocity perturbation was calculated analytically for the atmosphere with an inversion layer. It turned out that the intensity of downslope wind was increased by inversion layer of specific heights, which are well matched with the observations. For better understanding the generation mechanisms, two-dimensional numerical simulations are conducted for the 92 severe wind cases using the ARPS model. In most simulations, surface wind speed exceeds the value of the severe-wind criterion, and each simulated case can be explained by its own generation mechanism. However, in most simulations, the simulated surface wind speed is larger than the observed, due to ignoring the flow-splitting effect in the two-dimensional framework.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.867-872
• /
• 2002

A high intensity acoustic test facility is constructed at Korea Aerospace Research Institute (KARI) by 2003. The reverberant chamber of the facility has a volume of 1,228 cubic meters and shall provide an acoustic environment of 152 dB over the frequency range of 25 Hz to 10,000 Hz. The facility consists of a large scaled reverberant chamber, acoustic power generation systems, gases nitrogen supply systems, and acoustic control systems. This paper describes how the basic parameters of a chamber and power generation systems are controlled to meet the requirement of the test. The volume of a reverberant chamber is controlled by the size of test objects and the reverberant characteristics of a chamber. The capacity of acoustic power generation systems is determined by the energy absorption of a chamber and the efficiency of acoustic modulators. Simple math is employed to calculate the required power of acoustic modulators. Moreover, the paper explains how the distribution of sound pressure level at low frequency is checked by analytical and numerical methods.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.42-48
• /
• 2020

As global warming accelerates, eco-friendly electric cars are being developed to reduce carbon dioxide emissions, and power conversion inverters are used to drive motors. Among inverter components, DC-link capacitor is heated by high current usage, which causes problems such as performance and life-saving of inverter. Although metal cases with good thermal performance have been used to solve this problem, it is difficult to apply them in practice due to insulation problems with other parts. In this paper, the Heat-Generation influence factor of DC-link capacitor is analyzed. Variables on heat-generation are set at 3 levels for film width, inductance, and film thickness. Box-Behnken to 13 tests using the design and minimal deviations, e.g. through the experiment three times by each level. The surface of the film k type by attaching the sensor current is measured temperature. Capacitance was set to a minimum level of 200 ㎌ and had a frequency of 16 kHz with Worst case, ambient temperature of 85℃ and a ripple current of 50 Ams was applied. The temperature at the measurement point was collected in the data logger after sampling at 1 minute intervals for 2 hours after saturation with the ambient temperature. This experiment confirmed that setup factors are correlated with heat-generation.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.9
• /
• pp.424-430
• /
• 2001

A multi-level optimal power flow(OPF) algorithm has been evolved from a simple two stage optimal Power flow algorithm for constrained power economic dispatch control. In the proposed algorithm, we consider various constraints such as ower balance, generation capacity, transmission line capacity, transmission losses, security equality, and security inequality constraints. The proposed algorithm consists of four stages. At the first stage, we solve the aggregated problem that is the crude classical economic dispatch problem without considering transmission losses. An initial solution is obtained by the aggregation concept in which the solution satisfies the power balance equations and generation capacity constraints. Then, after load flow analysis, the transmission losses of an initial generation setting are matched by the slack bus generator that produces power with the cheapest cost. At the second stage we consider transmission losses. Formulation of the second stage becomes classical economic dispatch problem involving the transmission losses, which are distributed to all generators. Once a feasible solution is obtained from the second stage, transmission capacity and other violations are checked and corrected locally and quickly at the third stage. The fourth stage fine tunes the solution of the third stage to reach a real minimum. The proposed approach speeds up the two stage optimization method to an average gain of 2.99 for IEEE 30, 57, and 118 bus systems and EPRI Scenario systems A through D testings.

• Journal of Korea Game Society
• /
• v.19 no.3
• /
• pp.25-32
• /
• 2019

This paper proposes a automatic generation method of Match-3 game levels through genetic algorithm. It takes a lot of time and effort if persons have to control the level in the game. In this paper, the genetic algorithm is applied to create an appropriate block combination. We create block combination from integer DNA. Fitness is high if success probability played by computer is closer to given probability. Experiments have shown that computer-determined levels of difficulty have a significant impact on the results of game played persons.

• Food Science and Industry
• /
• v.52 no.3
• /
• pp.220-228
• /
• 2019

Rapid development of next-generation sequencing (NGS) technology is available to study microbes in genomic level. This NGS has been widely used in DNA/RNA sequencing for genome sequencing, metagenomics, and transcriptomics. The food microbiology area could be categorized into three groups. Food microbes including probiotics and food-borne pathogens are studied in genomic level using NGS for microbial genomics. While food fermentation or food spoilage are more complicated, their genomic study needs to be done with metagenomics using NGS for compositional analysis. Furthermore, because microbial response in food environments are also important to understand their roles in food fermentation or spoilage, pattern analysis of RNA expression in the specific food microbe is conducted using RNA-Seq. These microbial genomics, metagenomics, and transcriptomics for food fermentation and spoilage would extend our knowledge on effective utilization of fermenting bacteria for health promotion as well as efficient control of food-borne pathogens for food safety.